PSCD 1 A1 - LED Lighting PARKSIDE - Free user manual and instructions

Product type	LED spotlight
Brand	Parkside
Model	PSCD 1 A1
LED power	40 W
Operating voltage	230 V ~ 50 Hz
Protection class	I
Protection rating	IP54 (projector), IPX4 (outdoor power plug)
USB output	5 V =, 2.1 A
Dimensions (L × W × H)	approx. 26 × 33 × 22 cm
Weight	approx. 2.1 kg
Projection surface	approx. 33 × 27 cm
Brightness adjustment	Yes, via rotary switch
Color temperature adjustment	Yes, warm white to cool white, continuous
Orientation	Swivel joint and adjustment screw
Usage	Indoor and outdoor (IPX4 plug required)
Mounting	On supplied stand, do not mount on wall
Minimum distance to objects	1.0 m
Replaceable LED	No
Replaceable power cord	No
Maintenance	Slightly damp lint-free cloth, mild detergent
Warranty	3 years
Certifications	GS, EN 62471 (risk group 2)

Frequently Asked Questions - PSCD 1 A1 PARKSIDE

Can I use the LED spotlight PSCD 1 A1 outdoors?

Yes, the projector has an IP54 rating, but the power plug must be connected to an IPX4 outlet when used outdoors. The power plug itself is designed for indoor use only.

How do I adjust brightness and color temperature?

Use the rotary switch (8) to turn on and continuously adjust brightness. A second rotary switch (11) allows you to change the light color from warm white to cool white.

Can I charge my phone via the spotlight?

Yes, the spotlight is equipped with a USB socket (10) at the back, protected by a cover. Plug in a USB cable (not included) to charge devices like a phone or tablet. Ensure the cover is properly closed to prevent water ingress.

What to do if the LED stops working?

The LED is not replaceable. At the end of its life, the entire product must be disposed of. The power cord is also not replaceable. Contact customer service if the product is under warranty.

How to clean the spotlight?

First unplug the power cord and let it cool down for at least 15 minutes. Clean with a lint-free cloth slightly dampened with mild detergent. Never immerse the product in water.

What is the warranty period?

The warranty is 3 years from the date of purchase. Keep the receipt as proof. The warranty covers material and manufacturing defects, but not wear parts or damage caused by improper use.

Can I use the spotlight as primary room lighting?

No, according to the manual, the product is not intended to serve as room lighting in a domestic setting. It is designed to illuminate spaces such as workshops, garages, or garden sheds.

How to correctly orient the spotlight?

Loosen the swivel joint screw (3) and the adjustment screw (6), orient the spotlight in the desired direction, then retighten the screws to ensure stability. The spotlight must be mounted only on the supplied stand.

Are there any risks to the eyes?

Yes, the spotlight is classified as risk group 2. Do not look directly into the light source. Do not point the beam at reflective surfaces, people, or animals.

How to dispose of the spotlight at the end of its life?

Do not dispose of the product with household waste. Take it to a recycling center or appropriate collection point. The packaging is recyclable. Check with your local municipality for schedules and locations.

USER MANUAL PSCD 1 A1 PARKSIDE

Operation and safety notes

NL BE

LED-SCHIJNWERPER

GB/IEOperation and safety notesPage 9

List of pictograms used
~	Alternating current		The mains plug is suitable for indoor use only.
IP54	Dust protected + Splash-proof (IP54) for LED spotlight		Protection class I
	LED lifespan		Product designed to withstand severe mechanical handling
---	Direct current

LED spotlight 40 W PSCD 1 A1

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

The product is intended to illuminate indoor and outdoor areas, e.g. workshops, garages, or garden sheds. The product can withstand extreme physical conditions of vibration (1.0m^2 /S^3 200 - 2000Hz) The product is not intended for commercial use or for use in other applications.

This product is not suitable for household room illumination.
The mains plug is suitable for indoor use only.

- Partsdescription

1	Handle	7b	Washer
2	Spotlight	8	Rotaryswitch-
3	Screw of hinge joint	brightness level
4	Stand	9	Protective cap
5	Mains plug	10	USB socket
6	Locking screw	11	Rotaryswitch-color
7a	Spring washer	temperature

-Technicaldata

Operating voltage: 230V~50Hz

Total power consumption: 40 W

Protection class: I

Degree of protection: IP54 (splash-proof); The mains plug is suitable for indoor use only.

USB socket output

voltage/current: 5V=, 2.1 A

Dimension: approx. 26 x 33 x 22 cm

Weight: approx. 2.1 kg

Projected area: approx. 33 x 27 cm

GS certified

Risk Group 2

CAUTION. Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye.

Product tested against EN62471

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED spotlight
1 Instructions for use

Generalsafety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

DANGER TO LIFE AND ACCI

DENT HAZARD FOR TODDLERS

AND SMALL CHILDREN! Never

leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep the product out of the reach of children at all times.

This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Children should not be allowed to play with the product. Cleaning and user maintenance should not be performed by children without supervision.
DANGER OF SUFFOCATION! Children could swallow and choke on small included parts (e.g. screws). Keep children away from the work area during assembly.
The LED cannot be replaced. If the LED fails at the end of its life, the entire product must be replaced.
The mains cable of this product cannot be replaced; if the mains cable is damaged, the product shall be destroyed.

Danger to life by electric shock

Always check the product for damage before connecting it to the mains. Never use the product if it shows any signs of damage.
- Protect the mains cable against sharp edges, mechanical stresses and hot surfaces.
Always unplug the mains plug from the mains socket before installation, dismantling or cleaning.
- Disconnect the product from the mains supply if it is not going to be used for some time (e.g. holiday).
Prior to installation, verify that the mains voltage on site corresponds with the operating voltage required for the product (230V 50Hz) . Otherwise do not install the product.

A UTION! DANGER OF BURN INJURIES!

To prevent burns, verify the product is switched off and has cooled down for at least 15 min before touching it. The product can become very hot.

FIRE HAZARD! Fit the product so that it is at least 1.0m away from the material to be illuminated. Excessive heat can result in a fire.
CAUTION! RISK OF INJURY! Broken lamp glass must be replaced before any further use is made of the product.
The product is only suited for use with the built-in LED control gear.
The product continues to draw a small amount of power even if the product is off as long as product is connected to supply mains. To switch the product off completely, unplug the mains plug 5 from mains socket.
- Never direct the LED light beam on to reflective surfaces or at people or animals. Failure to observe this advice may result in eye injury and / or loss of sight to people or animals. Even a weak LED light beam can cause eye damage.
The product is not suitable be used as a hand held luminaire. Do not handheld the product when it is in operation.
Only mount the spotlight on the supplied stand 4. Do not directly mount the spotlight 2 on another surface, e.g. concrete wall or metal frame, etc.

- Installation

Note: Remove all packaging materials from the product.

□ Attach the spotlight 2 to the stand 4 using the included locking screw 6, washer 7b and spring washer 7a.
Place the spotlight 2 on a stable substrate with stand 4.
Check the stability of the spotlight 2.
Align the spot into the desired direction. You may need to slacken the screw of the hinge joint 3 and locking screw 6. After alignment, tighten the screw of the hinge joint 3 and locking screw 6 again, to ensure a secure hold of the spotlight 2.

Use

Insert the mains plug 5 in the mains socket.

Note: Insert the mains plug to the corresponding IPX4 socket only during outdoor us

Or the mains plug 5 should be for indoor use if no corresponding IPX4 socket can be found.

Switch on the product by turning the rotary switch 8.
Turn the rotary switch 8 further to adjust the brightness level of the spot 2.
Turn the rotary switch [1] to change the light color continuously from warm white to cold white.

Note: The accessible surface, especially heat sink, become very hot when operating, to prevent burn, use the handle 1 to move the product to desired position.

USB socket

• You can find the USB socket 10 on the back of the product, it was protected by a protective cap 9. You can charge mobile phones, tablets and other such devices with this USB socket 10.
• Open the protective cap 9.
  Insert the USB plug of the USB cable (not included) into the USB socket [10].
  Insert the USB plug at another side of the USB cable into the small electronic devices you wish to charge.

Switch on the product by turning the rotary switch 8.
Remove the USB cable as soon as charging is complete.
Close the protective cap 9

Note: The USB socket can only protected from water when the protective cap 9 is completely closed. Water may enter the product if the protective cap 9 is not corrected posited.

- Cleaning and care

Never immerse the product in water or other liquids. Otherwise the product can be damaged.
Remove the mains plug 5 from the mains socket and allow the product to cool down.
Clean the product with a lint-free, slightly moist cloth and mild cleaning agent.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard/80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening

hours can be obtained from your local authority.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

$$ (0, 0 8 \text {E U R} / \text {M i n .}, (\text {p e a k})) $$

$$ (0, 0 6 \text {E U R} / \text {M i n .}, (\text {o f f p e a k})) $$

E-Mail: [e-mail]

C

Puisance absorbee:40W