GS36NBIFV - Freezer SIEMENS - Free user manual and instructions

USER MANUAL GS36NBIFV SIEMENS

4.3 CmHa Ha easy opening handle 11

4.3.1 Cbaine Ha easy opening handle 11
4.3.2 MoHTIpaHc Ha easy opening handle 11

4.4 CmHa Ha rophata nahta Ha BpaTata 12

4.4.1 CbaJIHe Ha naHTata Ha BpaTata. 12
4.4.2 MoHTipaHe Ha nHaTata Ha BpaTata 14

4.5 CmHa Ha rohpata naHt ha Bpata (BpTa c dncnnei) 15

4.5.1 Cbanahe Ha nHaTata Ha BpaTata. 16
4.5.2 MoHTpaHa Ha nAHTaHa HbPaTaTa 17

4.6 CmHa Ha doJIHaTa naHTa Ha BpaTata 18

4.6.1 CmHa Ha donHaTa nHa HbPaTaTa 18
4.6.2 MoHTIpaHe Ha donHaTa nHaTb Ha BpaTaTa 19

4.7 CmHa Ha paTaa 20

4.7.1 ⅡBaKaHa Ha paΦTa 20
4.7.2 MoHTnpaHe Ha paTbTa 20

4.8 CMHa Ha KOHTeHepa 3a 3aMPa3EH XpaHHTeJIHN npOdyKTN 21

4.8.1 3BaXdaHe Ha KOHTeHepa 3a 3aMpa3EH XpaHnTeHN npOdykTN 21
4.8.2 MoHTnpaHe Ha KOHTeHepa 3a 3ampa3eHN xpAnHTenHn npOdykTN 21

4.9 CmHa Ha neDoreHepaTopa 22

4.9.1 3BaJdaHe HaJeDoreHepaTopa 22
4.9.2 MoHTpaHe Ha JeDoReHepaTopa 22

4.10 CmHa Ha LED ocBeTneHneTo otrope 23

4.10.1 CbajHe Ha LED oCBeTneHHeTo 23
4.10.2 MoHTnapeHaLEDocBETneHHeToOTrope 24

OTHOCHO To3n DokyMeHT

1.1 Baxha nHΦopMaζη

1.1.1 Uen

TeHc cBbETn 3a pEmOH T NOMarat Ha Ntpe6nTEnla DpemOHtnpa Cam ypeiB C bOTBeTCTBnC pernameHTa 3a ekONOrOcb6paHO npoeKtnpaHe Ha ypeiNe (OT03.2021 r.).

cBbPbKAT NHΦOPMaJH KaJa CMeHrTe OnpEeHEn PReEPBn HAcTN, BKNIOHTENHO pIepNpEckHn H NICKOBE.

Ako IMATE HRAKAKINBbnpoM,MOJIa CbPkeTe Ce c HAUNOOTDeN 3a OBCNYBAHe Ha KIMENTH. Hne HOCIM OTTOBOPHOCT 3a UETn, CAMO AKO CbBeNTe 3a peMOHT ca cna3eHN npabInHo.

1.2 06aCHeHne Ha cHMBOJInTe

1.2.1 HbHa onachoct

IpeynpeintenHnbe CbctoT OT CMBON IN CNHnHa Dyma.CnHnHaTaDyMa nok3Ba cepno3HOCTTA Ha onaCHOCTTA.

MoHTnpaIteB06paTeH peI.

PemOH

4.3 Cmha Ha easy opening handle

CneuaJIHHHHTpymeHTn:

Kpbctata oTBeptka PH2

N3nCKBaHe:

YpeDbTe n3KIOueHOT 3aXpaHbHaHeTO.
BpaTaTa e oTbopeHa.

4.3.1 CbJIHe Ha easy opening handle

1. CbaneTe kanaeTo Ha easy opening handle (1).
2. Pa3BnTe DaBata BnHTa (2).

Easy opening handle e cbanha.

4.3.2 MoNTIpaHHe Ha easy opening handle

Mexan3bHa easy opening handle Tpa6ba Da 6be npabnHn Hactpoen npenMOHTaKa.
PpabnHOto pa3noJXeHHe Ha 6yTaHnI npbT (1), Ha3bSeHnTe KaandpAHTu (2) n, pynHnata (4) n orpaHnHTen (5) 3a MoHTax Ha BpataTAOTNBO e NOk3aHO HA padHKata.

PaoNIOPOKHeMoTa HnOIOKMOHOENTHe Ha easy opening handle npn MOHTaKaHbPaTaTaOTdACHO e OUNCAHO BdoKOpMeHTa "HcTpyKpIa 3a MOHTaK".

MOnTpauTe B o6paTeH pei.

PemOH

4.4 CmHa Ha rohata naHt ha BpaTaTa

Cneunannn HNCTpyMeHTN:

HakpaimHK Torx TX20 6,3 MM (1/4") [00340865]

PNEUYPNPEXDEHME

Texk, o6emnctuypei!

IobpeHa HpyrHuactn Ha ypeHa NmB Doma Ha KHeHTa, HAp. DbHO

TO.

3akpenete KOMnoHEHTa, Taka Ye Da He naHe.

N3nCKBaHe:

YpeBt en3KIOueHOT 3axpaHbHeTo.
BbtpseHHNTe pHTNHn Ha ypeDa ca OTCTpaHeHn.

4.4.1 CbanyHe Ha naHTata Ha BpataTa

PemOH

1. NocTabete ypea Jernan Ha 3aHaTa cn Ctpana.

2.1.HaTnCHETeKanaHToHa rOpHATA naHTa OT dBete CtpAHN(1).

1. N3BaJeTe KanaeTo Ha roPHaTa naHTa (2).
2. CbaneTe kanaeTo Ha rohpHaTa naHTa (3).

PemOH

3.1.PaBnIeDbata BnHTA(1). 2.CBanTe rohpHa nHaTAt

TopHata nHaTa Ha BpaTaTa e CbaNeHa.
4.4.2 MoHTnpaHe Ha naHTaTa Ha BpaTaTa
MoHTnpaIteB06paTeH pei.

PemOH

4.5CMHaHa rohpHata naHTa Ha Bpata (Bpata c dncnnei)

Cneunannn HNCTpyMeHTN:

HakpaHHK Torx TX20 6,3 MM (1/4") [00340865]

PDEUYPTPEKDEHNE

Teekn, o6emncTuypeu!

IobpeHa HpyrHuactn Ha ypeHa NmB Doma Ha KHeHTa, HAp. DbHO

TO.

3akpeeneKOMnoHeHTa,TakaYe Da He NaHe.

H3nCKBaHe:

YpeBt en3KIOHcHOT 3axpaHbHeTo.
BbtpewHnTe pHTINHa ypeDa ca oTcPaHeHn.

PemOH

4.5.1 CbAJIHe Ha naHTata Ha BpaTata

1. NocTabete ype da nnerHan Ha 3aHata cn cTpaHa.

MoHTpaTBeBobpTeHpeI.

PemOH

4.6CMraHa Ha donHaTa naHTa Ha BpaTaTa

Cneunannn HNCTpyMeHTN:

HakpaHHK Torx TX20 6,3 MM (1/4") [00340865]

PDEYIPKXDEHNE

Teekn, o6emncTuypeu!

IobpeHa HpyrHuactn Ha ypeHa NmB Doma Ha KHeHTa, HAp. DbHO

TO.

3akpenete KOMnoHEHTa, Taka Ye da He naHe.

N3nCKBaHe:

YpeBt en3KIOueHOT 3axpaHbHeTo.
BbtpseHHTE qHTINHn Ha ypeDa ca oTcTaHeHN.
YpeBt e nocTabenIerHan Ha3aI.

FopHata naHTa e cbaneHa.→15

4.6.1 CmHa Ha donHaTa nHa Ta HbpaTa

1.Ⅰ3BaTeBpTaTata.

2.1.Pa3BnTe BnHTa(1).

2.ИЗБВРТЕДОПНАТа NaHTa HABbH (2).
3. CbaneTe DonHaTa naHTa (3).

Donnata nHaTa e CbAeHa.

PemOH

4.6.2 MoHTnpaHe Ha DoJIHaTa NaHTa Ha BpaTata

MOHTnpaTBeB6paTeHpe.

PemOH

4.7 CmHa Ha paPta

N3nCKBaHe:
BpaTaTa e oTbopeHa.

4.7.1 N3BaXdAne Ha paΦTa

H3dbpnaTepaTa.

PaftbtecbaneH.

4.7.2 MoNTupaHe Ha paΦTa

MOHTnpaTeB06paTeHpe.

PemOH

4.8 CMraHa Ha KOHTeHepa 3a 3aMpa3eHN XpaHNTENH npOdykTN

N3nCKBaHe:
BpaTaTa e oTBopeHa.

4.8.1 3BaKaJaHe Na KOHTeHepa 3a 3ampa3eHn XpaHNTeHn npOyKTH

1. 13bpnaTe DOKpaI KOHTeHepa 3a 3ampa3EH xpaHTeHH npOdykTN (1). 2. 13BaTe KOHTeHepa 3a 3ampa3EH xpaHTeHH npOdykTN (2).

KoHTeHepbT 3a 3ampa3EHn XpaHHTEN npOpykTN e H3BaHeN.

4.8.2 MoHTnpaHe Ha KOHTeHepa 3a 3ampaehn XpaHHTEN npOdykTN

MOnHTnpaTBeB0paTeHpeJ.

4.3 Zamjena rucke easy opening handle 34

4.3.1 Uklanjanje rucee easy opening handle 34
4.3.2 Postavljanje ruche easy opening handle 34

4.4 Zamjena gornjeg zgloba vrata 35

4.4.1 Uklanjanje zgloba vrata 35
4.4.2 Postavljanje zgloba vrata 37

4.3 Vymena Easy opening handle 56

4.3.1 Vyjmuti Easy opening handle 56
4.3.2 Montaz Easy opening handle.. 56

4.4 Vymena horniho zavesu dvirek 57

4.4.1 Odstraneni zavesu dvirek 57
4.4.2 Montaz zavesu dvirek 59

4.5 Vymena horniho zavesu dvirek (dvifka s ukazatelem) 60

4.5.1 Odstraneni zavesu dvirek 61
4.5.2 Montaz zavesu dvirek 62

4.6 Vymena dolnho zavesu dvirek 63

4.6.1 Vymena dolniho zavesu dvifek 63
4.6.2 Montaz spodniho zavesu dvirek 64

4.7 Vymena odkladaci plochy 65

4.7.1 Vyjmuti odkladaci plochy.. 65
4.7.2 Montáz odkladaci plochy 65

4.8 Vymena zasobniku nazmrazené potraviny 66

4.8.1 Vyjmuti zasobniku nazmrazené potraviny 66
4.8.2 Montaz zasobniku nazmrazené potraviny 66

4.9 VymenaVyrobniku ledu 67

4.9.1 Vyjmuti vyrobniku ledu 67
4.9.2 Montaz vyrobniku ledu 67

4.10 Vymena LED horniho osvetleni 68

4.3 Vymena Easy opening handle

Speziáni nástroje:

Sorg for at sikre apparater mod at glide.

PAS PAI

Fare for nedfaldende deleg pga. Iosnede skruer!

rsonskade pga, nedfaldende dele
Sorg for at sikre componenten mod at falde ned.

BEM/ERK!

Fare for nedfaldende deleg pga. Iosnede skruer!

Sarg for at sikre componenten mod at falde ned.

Preindstilling:

Sorg for at sikre apparater mod at glide.

PAS PAI

Fare for nedfaldende dele pga. Iosnede skruer!

ronskade pga. nedfaldende dele
Sorg for at sikre componenten mod at falde ned.

BEM/ERK!

Fare for nedfaldende dele pga. Iosnedeskruer!

Sarg for at sikre componenten mod at falde ned.

FARE

Sorg for at sikre apparater mod at glide.

Fare for nedfaldende dele pga. Iosnede skruer!

ronskade pga. nedfaldende dele

Sorg for at sikre componenten mod at falde ned.

Fare for nedfaldende dele pga. Iosnede skruer!

Sarg for at sikre componenten mod at falde ned.

Preindstilling:

Repair hints - Freezer

1 Concerning this document. 116

1.1 Important information 116

1.1.1 Purpose 116
1.2 Explanation of symbols 116
1.2.1 Danger levels 116
1.2.2 Hazard symbols 116
1.2.3 Structure of the warnings 117
1.2.4 General symbols 117

Safety. 118

2.1 General Safety instructions 118

2.1.1 All domestic appliances 118

Tools and aids. 119

Repair 120

4.3 Replacing easy opening handle 124

4.3.1 Removing easy opening handle 124
4.3.2 Installing easy opening handle 124

4.4 Replacing door upper hinge 125

4.5 Replacing door upper hinge (door with display) 128

4.7 Replacing shelf. 133

4.7.1 Removing shelf 133
4.7.2 Installing shelf 133

4.8 Replacing frozen food container. 134

4.8.1 Removing frozen food container 134
4.8.2 Installing frozen food container 134

4.9 Replacing ice maker 135

4.9.1 Removing ice maker 135
4.9.2 Installing ice maker 135

4.10 Replacing LED top light 136

4.10.1 Removing LED light. 136
4.10.2 Installing top LED light 137

Concerning this document

1.1 Important information

1.1.1 Purpose

These repair hints support consumer to repair appliances by himself according to the applicable eco-design regulation (as of 03/2021).

They contain information how to exchange defined spare parts including warnings and risks.

In case of questions, please contact our customer service. We will only be liable for damages if the repair hints have been followed properly.

1.2 Explanation of symbols

1.2.1 Danger levels

The warning levels consist of a symbol and a signal word. The signal word indicates the severity of the danger.

Warning level Meaning
Danger	Non-observation of the warning message will result in death or serious injuries.
Warning	Non-observation of the warning message could result in death or serious injuries.
Caution	Non-observation of the warning message could result in minor injuries.
Notice	Non-observation of the warning message could result in damage to property.

Table 1: Danger levels

1.2.2 Hazard symbols

Hazard symbols are symbolic representations which give an indication of the kind of danger.

The following hazard symbols are used in this document:

Hazard symbol Meaning
!	General warning message
	Danger from electrical voltage
	Risk of explosion
	Danger of cuts
	Danger of crushing

Concerning this document

Hazard symbol Meaning
	Danger from hot surfaces
	Danger from strong magnetic field
	Danger from non-ionizing radiation

Table 2: Hazard symbols

1.2.3 Structure of the warnings

Warnings in this document have a standardised appearance and a standardised structure.

Danger

Type and source of danger!

Possible consequences of ignoring the danger / warning.

Measures and prohibitions for preventing the danger.

The following example shows a warning that warns against electric shock due to live parts. The measure for avoiding the danger is mentioned.

Danger

Risk of electric shock due to live parts!

Death by electrocution

• Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

1.2.4 General symbols

The following general symbols are used in this document:

Gen. symbol Meaning
i	Identification of a special tip (text and/or graphic)
j	Identification of a simple tip (only text)
	Identification of a link to a video tutorial

Table 3: General symbols

Gen. symbol Meaning
	Identification of required tools
	Identification of required preconditions
	Identification of a condition (if ..., then ...)
	Identification of a result
Start Identification of a key or button
[00123456] Identification of a material number
Status Identification of displayed text / window(in the appliance's display)

Safety

2.1 General Safety instructions

2.1.1 All domestic appliances

Risk of electric shock due to live parts!

Errors by repairs involving electrical components can lead to electrical shock!
Disconnect the appliance from the mains for at least 60 seconds before starting work.
After the repair have a safety test according VDE 0701 or country-specific regulations performed.
Risk of injury from sharp edges!
Wear protective gloves.
Risk of crushing during repair, maintenance, troubleshooting and service due to heavy and moving components
Wear protective shoes.
Secure heavy components from falling down.
Do not stick body parts into moving components.
Risk to the appliance's safety / function!
Only use original spare parts.
Risk of damage to electrostatically sensitive components (ESDs)!
Do not touch the modules, including connections and conductor paths.

Tools and aids

Designation Details Images
Protection cloth [00342013]	60 cm x 50 cm	###
Phillips screwdriver PH2
Torx Bit TX20 [00340865]	6.3 mm (1/4")
Slotted screwdriver	Blade 2.4 mm x 0.4 mm x 60 mm, in the kit [00341820]

Prerequisite:
Door is open.

1. Release door gasket from the groove on right and left corner.

1. Pull out door gasket from groove.

Door gasket is removed.

i	Thickness of new door gasket may deviate slightly from thickness of old door gasket. This will not affect closing behavior and long-term function.
i	If your appliance has adjustable hinges or hinge attachments, you can optimize the closing behavior subsequently.
i	Small side holes in door gasket are functional (required for ventilation). These are not production faults.

Repair

1. Check groove for gasket for damage.

1. If groove for gasket is it is damaged.
2. Contact customer service.
3. Slight deformation of door gasket is normal and does not affect its function. It is recommended to straighten door gasket before inserting it into appliance.

Heat door gasket with a hair dryer or hot water and manually reshape it.

1. Push corners of gasket at the top and bottom to the groove.

Repair

1. Press whole gasket step by step into the groove.

Door gasket is installed.

Slotted screwdriver Blade 10 mm x 1.6 mm x 200 mm

Prerequisite:

Appliance is disconnected from power supply.
Door is open.

4.2.1 Removing door handle

1. Remove two screw caps (1).

2. Unscrew two screws (2).

3. Remove door handle (3).

Door handle is removed.

Install in reverse order.

Repair

4.3 Replacing easy opening handle

Required tools:

Phillips screwdriver PH2
Prerequisite:
Appliance is disconnected from power supply.
Door is open.

4.3.1 Removing easy opening handle

1. Remove easy opening handle cover (1).
2. Unscrew two screws (2).

Easy opening handle is removed.

4.3.2 Installing easy opening handle

Easy opening handle mechanism should be properly set before installation. Correct arrangement of push rod (1), toothed quadrants (2) and (3), spring (4) and limit stop (5) for the door left side installation is shown on the graphic.

Arrangement of easy opening handle sub-components for door right side installation is described in the document "Installation instruction".

Install in reverse order.

Repair

4.4 Replacing door upper hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Warning

Heavy, bulky appliances!

Back and muscle injuries

Appliance door removal operation should only be carried out by
trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment.

Caution

Sharp edges!

Cut injuries

Wear protective gloves.

Warning

Slipping of tilted appliances!

Bone fractures / crush injuries

Secure appliances against slipping

Caution

Risk of falling parts due to released screws!

ury because of falling parts.
- Secure component from falling down.

Notice

Risk of falling parts due to released screws!

Damage to other parts of the appliance or at customers home e.g. bot

tom.

Secure component from falling down.

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.

1. Place appliance on the back side.

2.1. Press upper hinge cover on both sides (1).

1. Move out upper hinge cover (2).
2. Remove upper hinge cover (3).

Repair

3.1. Unscrew two screws (1).

1. Remove upper hinge (2).

Door upper hinge is removed.
4.4.2 Installing door hinge
Install in reverse order.

Repair

4.5 Replacing door upper hinge (door with display)

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.

Repair

1. Place appliance on the back side.

2.1. Press upper hinge cover on both sides (1).
2. Move out upper hinge cover (2).
3. Remove upper hinge cover (3).

3.1. Remove cable box cover (1) 2. Remove cable protection (2)
3. Disconnect electrical connection (3).
4. Unscrew two screws (4)
5. Remove upper hinge (5).

Door upper hinge is removed.

Install in reverse order.

Repair

4.6 Replacing door lower hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Heavy, bulky appliances!

Back and muscle injuries

Appliance door removal operation should only be carried out by
trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment.

Sharp edges!

Cut injuries

Wear protective gloves.

Slipping of tilted appliances!

Bone fractures / crush injuries

Secure appliances against slipping

Risk of falling parts due to released screws!

ury because of falling parts.

• Secure component from falling down.

Risk of falling parts due to released screws!

Damage to other parts of the appliance or at customers home e.g. bot

tom.

• Secure component from falling down.

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.
Appliance is placed on the back side.

Upper hinge is removed. Page 128

4.6.1 Replacing door lower hinge

1. Remove door.

2.1. Unscrew the screw (1).

1. Turn lower hinge out (2).
2. Remove lower hinge (3).

Lower hinge is removed.

Repair

Install in reverse order.

Repair

4.7 Replacing shelf

Prerequisite:
Door is open.

4.7.1 Removing shelf

Pull out shelf.

Shelf is removed.

4.7.2 Installing shelf

Install in reverse order.

Repair

4.8 Replacing frozen food container

Prerequisite:
Door is open.

4.8.1 Removing frozen food container

1. Pull out frozen food container all the way (1). 2. Remove frozen food container (2).

Frozen food container is removed.

4.8.2 Installing frozen food container

Install in reverse order.

Repair

4.9 Replacing ice maker

Prerequisite:
Door is open.

4.9.1 Removing ice maker

1. Pull out shelf frozen food container with ice maker (1).
2. Release hooks (2).
3. Remove ice maker (3).

Ice maker is removed.

4.9.2 Installing ice maker

Install in reverse order.

Repair

4.10 Replacing LED top light

Required tools:

Slotted screwdriver Blade 2.4 mm x 0.4 mm x 60 mm, in the kit [00341820]

Your appliance features a maintenance-free LB

These lights may be repaired by customer service or authorised technicians only!

Danger

Risk of electric shock due to live parts!

Danger to life through electric shock in case of improper repair

Electric parts should be repaired by a qualified electricians.

After the repair have a safety test according VDE 0701 or country-specific regulations performed.

Danger

Risk of electric shock due to live parts!

Death by electrocution

• Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

Caution

Sharp edges!

Cut injuries

Wear protective gloves.

Prerequisite:

Appliance is disconnected from power supply.
Door is open.
Upper interior fittings are removed.

4.10.1 Removing LED light

1. Move the LED light to the left side.

LED light electrical connection is disconnected.

1. Release LED light hooks.

Repair

1. Remove LED light moving it forward.

LED light is removed.

4.10.2 Installing top LED light

Install in reverse order.

Remonditeave - Sögavkülmik

1 Selle dokumendiga seoses 139

1.1 Tahtis teave 139

1.1.1 Eesmark 139
1.2 Sumbolite selgitus 139
1.2.1 Ohutasemed 139
1.2.2 Ohusumbolid 139
1.2.3 Hoiatuste struktuur 140
1.2.4 Üldised sumbolid 140

Ohutus. 141

2.1 Uldised ohutusiuhised 141
2.1.1 Kofik kodumasinad 141

Tabel 1: Ohutasedmed

1.2.2 Ohusumbolid

Ohusumbolid on sumboolsed kujutised, mis viytavad ohu laadile. Selles dokumendis kasutatakse alljargnevoid ohusumboleid.

m = 311

1.2.3 Doun Twv TpoeiToiOneWv

OITPOEIOIIOAEiOe auto To Eyypao Exouv Mua TUTOTOIINeyn EpaVion KAI MIA TUTOTOIINeyn Doun.

KINADYNOE

EiOgKai Tny KIVovou!

PiBavcs ouveteies edyayvonaeToV KIOUVO/THV TPOEOToln.

Mtpa kai aayopeuoeic yia tyn pOAnn tou Kivouou.

To napakutnapadeyia deixvei maipinoeodtoinn Tou pioeiodtoei kat a n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

KINADYNOZ

Kivouos nAekptponanlag Aoyw nAektpopopowepw!

Oavatoa nto nkektponla

AToouvdeTe Tc oukeuec aTTO nV npoxn nAekptikou peuatoC

Touaxiotov 60 deutepoaettna piv Eekivnoete Tc ETIOKEUEC.

1.2.4 Tevik

Ta akolouba yevikα σμβoλ xρησιοποιuovtai oTo napov εyypapo:

m = 311

PERIGO

Risco deCHOque eltrico devidao a partes sob tensao!

4.3 Inlocuirea easy opening handle 418

4.3.1 Demontarea easy opening handle 418
4.3.2 Montarea easy opening handle 418

4.4 Inlocuirea balamalei de sus a usii 419

4.4.1 Demontarea balamalei usii 419
4.4.2 Montarea balamalei usii 421

4.5 Inlocuirea balamalei de sus a uii (usau afisaj) 422

4.5.1 Demontarea balamalei uii 423
4.5.2 Montarea balamalei usii 424

4.6 Inlocuirea balamalei de jos a uui 425

4.6.1 Inlocuirea balamalei de jos a usi 425
4.6.2 Montarea balamalei de jos a ušii 426

Cap torx TX20 6.3 mm (1/4") [00340865]

Surubelinita platá Lamá de 10 mm x 1,6 mm x 200 mm

Cerintă:

4.3 Inlocuirea easy opening handle

Scule speciale:

Surubelinita Phillips PH2
Cerinta:
Aparatul este deconnectat de la sursa de energia electrica.
Usa estedeschisa.

4.3.1 Demontarea easy opening handle

1. Scoateti easy opening handle (1).
2. Desurubati doua sunuburi (2).

Cap torx TX20 6.3 mm (1/4") [00340865]

AVERTISMENT

Aparate grele, masive!

Accidentarea spatelui si leziuni musculare

Cap torx TX20 6.3 mm (1/4") [00340865]

AVERTISMENT

Aparate grele, masive!

Accidentarea spatelui si leziuni musculare

4.3 Vymena uchytky easy opening handle 441

4.3.1 Odoberanie uchytky easy opening handle 441
4.3.2 Montazuchtyk easy opening handle 441

4.4 Vymena horného zavesu dveri 442

4.4.1 Odoberanie zavesu dvierok 442
4.4.2 Montáz závesu dvierok 444

4.3 Vymena uchytky easy opening handle

Spezialne nastroje:

4.3 Byta Easy opening handle 509

4.3.1 Ta bort Easy opening handle 509
4.3.2 Montera Easy opening handle 509

1. Tryck in hela packningen i sparet bit for bit.

4.3 Byta Easy opening handle

Nödvändiga verktyg:

Torbits TX20 6.3 mm (1/4") [00340865]