WD 7.700 PT - Vacuum Cleaner Kärcher - Free user manual and instructions

USER MANUAL WD 7.700 PT Kärcher

WD 7.2xx Register and win! www.kaercher.com 59637520 (02/11) WD 7.2xx WD 7.3xx WD 7.5xx WD 7.7xx

• Netzkabel Schalldruckpegel (EN 60704-2-1) Gewicht (ohne Zubehör) 12 DE– 1 Dear Customer, Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. The appliance is intended for use as a Mul- ti-Purpose Vac corresponding to the de- scriptions given in these operating instructions and the safety notes. This appliance has been designed for use in private households and is not intended for commercial use. – Protect the unit from rain. Do not store outside. – Caution: Always use a pre-separator while vacuuming ashes and soot (order no. 2.863-139). Use the Multi-Purpose Vac only with: – Original filter bag. – Original spare parts, accessories and special accessories. The manufacturer is not responsible for any damages that may occur on account of im- proper use or wrong operations. The packaging material can be recy- cled. Please do not place the packag- ing into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable ma- terials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appli- ances using appropriate collection sys- tems. Filters and filter bags are made from envi- ronment-friendly materials. They can therefore be disposed off through the normal household garbage provided you have not sucked in substances that are not permitted to be thrown into household garbage. Notes about the ingredients (REACH) You will find current information about the ingredients at: http://www.karcher.de/de/unternehmen/ umweltschutz/REACH.htm – This device is not intended for use by persons (including children) with re- duced physical, sensory or mental abil- ities or lacking experience and/or knowledge, unless they are supervised by a person responsible for their safety or are instructed by these persons on the use of the device. Children should be supervised, to ensure that they do not play with the device. – Keep packaging film away from children - risk of suffocation! – Switch the appliance off after every use and prior to every cleaning/mainte- nance procedure. – Risk of fire. Do not vacuum up any burn- ing or glowing objects. – The appliance may not be used in areas where a risk of explosion is present. 몇 Electrical connection The appliance may only be connected to al- ternating current. The voltage must corre- spond with the type plate on the appliance. Risk of electric shock Never touch the mains plug and the socket with wet hands. Always hold the plug rather than the cable when disconnecting the power cord. Contents Safety instructions
• EN p. 1
• Description of the Appliance EN Operation p. 2
• EN Maintenance and care p. 3
• EN Troubleshooting p. 5
• EN General notes p. 5
• EN Technical specifications p. 6
• EN Proper use Environmental protection Disposing the filters and filter bags Safety instructions 13EN– 2 Check the power cord with mains plug for damage before every use. If the power cord is damaged, please arrange immediately for the exchange by an authorised custom- er service or a skilled electrician. To avoid accidents due to electrical faults we recommend the use of sockets with a line-side current-limiting circuit breaker (max. 30 mA nominal tripping current). 몇 Caution Certain materials may produce explosive vapours or mixtures when agitated by the suction air! Never vacuum up the following materials: – Explosive or combustible gases, liquids and dust particles (reactive dust parti- cles) – Reactive metal dust particles (such as aluminium, magnesium, zinc) in combi- nation with highly alkaline or acidic de- tergents – Undiluted, strong acids and alkalies – Organic solvents (such as petrol, paint thinners, acetone, heating oil). In addition, these substances may cause the appliance materials to corrode. Illustrations on fold-out pages! These operating instructions describe the basic models of the Multi-Purpose Vacs shown on the front cover. Depending on the model, there are dif- ferences in the equipment and included accessories. When unpacking the product, make sure that no accessories are missing and that none of the package contents have been damaged. If you detect any transport dam- ages please contact your dealer. included in the scope of delivery possible accessories To connect the suction hose during vacu- uming. Note: In order to disconnect it, push down with your thumb and pull the suction hose out. To connect an electric tool. Note: Observe the maximum connected power (see Chapter "Specifications"). Connect the suction hose to the blower connection, this will activate the blower function. To carry the appliance or to remove the ap- pliance head after unlocking. This accessory compartment allows the storage of the suction hose, suction noz- zles and the mains cable. To rest the floor nozzle during work inter- ruptions. This accessory compartment allows the storage of the suction pipes or other acces- sories. Pull out to open, push in to lock. Description of the Appliance 1 Suction hose connection 2 Machine socket 3 Blowing connection 4 Carrying handle 5 Filter flap release button 6 Push handle 7 ExPress filter cleaning button 8 Filter cleaning display 9 Accessory compartment, hook 10 Key for mains cable retraction 11 Rotary switch (ON/OFF) 12 Parking position 13 Accessory storage container 14 Container closure 15 Wheels 16 Swivel casters 14 EN– 3 몇 Caution Filters and their frames must always be in- serted during operation. 몇 Caution: Please do not dispose of! Is hooked into the interior of the container, is used to hold the filter bag. Note: Do not use a filter bag for wet vacu- uming! Recommendation for appliances with- out filter cleaning: To vacuum fine dust, use the filter bag. For vacuuming dust from hard surfaces and carpets: Lever on symbol for carpets Lever on symbol for hard surfaces To connect the suction hose with an electric tool. For more flexibility when working with elec- tric tools. Note: Can also be used with an adapter. 몇 Always work with an inserted flat fold filter - during wet as well as dry vacuum cleaning! Illustration Remove the appliance head and take the contents out of the container. Illustration Turn the container, press in the swivel casters in the openings at the base of the container till the end-point. Illustration Install the rear wheels: Break the bearing halves apart and press the large halves into the wheel pickup. For appliances without axle: Place the wheels into the wheel intake. For appliances with axle: Attach the wheels to the axle and place into wheel intake. Finally, hook the smaller halves into the larger ones and screw them in. Illustration Install the hook. For appliances with pushing handle: Illustration Insert the pushing handle into the two respective openings in the appliance head from above and press them down all the way. Secure from below using 2 screws. Note: If the pushing handle is removed later on, the bottom openings must be closed up with the two screws for func- tional reasons. Illustration Insert and lock the appliance head. Illustration Connect accessories. Illustration Plug in the main plug. 17 Flat fold filter with frame (already installed in the appliance) 18 Filter bag intake 19 Filter bag 20 Suction hose with handle 21 Suction tubes 2 x 0.5 m 22 Floor nozzle (with switching lever) 23 Crevice nozzle 24 Adapter 25 Flexible tool hose Operation Before Startup Start up A 6 15EN– 4 Illustration Turn on the machine. Position I: Suction or blowing Position 0: Appliance is switched off Position MAX: Suction or blowing. Position MAX: Vacuuming with connected electric tool Performance regulation: Reduce the suction if necessary during vacuuming, blowing or when working with an elec- tric tool. Position 0: The appliance is switched off. Electric tool is supplied with voltage. 몇 Work only with a dry flat fold filter! Illustration Recommendation for appliances with- out filter cleaning: To vacuum fine dust, use the filter bag. The filling level of the filter bag depends on the dirt that is sucked in. Clogged filter bags can burst - therefore make sure to replace the filter bag in a timely manner! The filter bag needs to be replaced more frequently while sucking in fine dust, sand, etc. For appliances with ExPress filter clean- ing: When vacuuming without a filter bag, the filter cleaning indicator lights up red if the flat fold filter needs to be cleaned. Use the filter cleaning. The ExPress filter cleaning is intended for the vacuuming of large volumes of fine dust without the filter bag inserted. If the filter cleaning indicator is red, clean the flat fold filter: Illustration Press the filter cleaning key 3 x times with the appliance switched on; wait about 4 seconds between the individual presses. Note: After several filter cleaning proc- esses or if the filter cleaning indicator is red, check the container for its fill vol- ume. Empty the container if needed. Attach the accessories to vacuum mois- ture or wetness to the suction pipes or directly to the handle. 몇 Caution: Do not use a filter bag! Immediately switch the appliance off if foam forms or liquids escape! Note: If the container is full a float closes the suction opening and the appliance works at a higher speed. Switch off the ap- pliance immediately and empty the contain- er. Adapt the adapter to the connection di- ameter of the electric tool using a knife if necessary. Illustration A) Plug the enclosed adapter onto the handle of the suction hose and connect the electric tool with the connection. p. 6

B) Use the flexible tool hose to gain more flexibility in your work. Connect this hose to the suction hose and to the adapter and then to the connection of the electric tool. Illustration For appliances with built-in socket: Connect the mains plug of the electric power tool to the vacuum cleaner. Switch the appliance on (move the rota- ry switch to the left to position MAX) and start working. Note: The suction turbine starts with a delay of 0.5 seconds after the electric tool has been switched on. After the electric tool has been switched off, the suction turbine will continue to run for approx. 5 seconds to suck in the re- maining dirt from the suction hose. For appliances without built-in socket. For appliances with built-in socket Dry vacuum cleaning ExPress filter cleaning Wet vacuum cleaning Working with electrical power tools 16 EN– 5 Cleaning hard to reach locations or, where vacuuming is not possible, like leaves from a gravel bed. Illustration Connect the suction hose to the blower connection, this will activate the blower function. Turn off the appliance. Illustration Hook the floor nozzle into the parking position. Turn off the appliance and disconnect the mains plug. Illustration Remove the appliance head and empty the reservoir filled with wet or dry dirt. Illustration Store the accessories and the mains cable on the appliance and store the appliance in dry rooms. Danger Turn off the appliance and remove the mains plug prior to any care and mainte- nance work. Repair works may only be performed by the authorized customer service. 몇 Caution Do not use abrasives, glass or universal cleaners! Never immerse the appliance in water. Clean the appliance and accessory parts made of plastic with a commercial plastic cleaner. If required, rinse the container and ac- cessories with water properly and dry them before reuse. Illustration For appliances without filter clean- ing: Release and open the filter flap. Re- move the frame and filter and knock the dirt out of the filter. Clean the filter under running water if necessary. Do not rub or brush the filter dry. Let it dry completely prior to installation. Illustration After that, insert the filter first and then the frame. For appliances with ExPress filter cleaning: Use the filter cleaning (see Chapter "ExPress filter cleaning"). Note: If the suction performance is still not satisfactory, in spite of the cleaning, separate the suction hose from the pipes, hold the opening of the suction hose shut/close it and activate the filter cleaning button three more times with the suction hose held shut. The mains cable is probably dirty, clean the mains cable. Turn off the appliance immediately. Illustration Clean the floater system. Remove the appliance head, unscrew the floater basket (A) in the direction of the ar- row and remove it. Remove the floater (B) and clean both under flowing water. If necessary, also clean the cover for the floater valve (C): For this, release and remove the cover. Reattach after the cleaning process and lock it (ob- serve the markings and symbols). To install, first insert the floater, then add the floater basket and lock it. Blowing function Interrupting operation Finish operation Empty the container Storing the appliance Maintenance and care H 2 Clean flat fold filter Troubleshooting Mains cable retraction does not function Water is leaking I 1

Kärcher Limited Unit 10, 17/F. APEC Plaza 49 Hoi Yuen Road Kwun Tong, Kowloon [phone]

TWN Karcher Limited 5F/6. No.7 Wu-Chuan 1st Rd Wu-Ku Industrial Zone Taipei County [phone]