Breeze 300261 - Iron MORPHY RICHARDS - Free user manual and instructions

Technical Specifications	MORPHY RICHARDS Breeze 300261 Iron
Power	2400 W
Tank Capacity	350 ml
Soleplate	Ceramic soleplate
Continuous Steam	40 g/min
Steam Boost	120 g/min
Anti-Scale Function	Yes
Spray Function	Yes
Usage	Ideal for all fabric types
Maintenance	Regular soleplate cleaning recommended
Safety	Automatic shut-off after 30 seconds in horizontal position
Weight	1.5 kg
Dimensions	30 x 12 x 15 cm
Warranty	2 years

Frequently Asked Questions - Breeze 300261 MORPHY RICHARDS

How do I fill the water tank of the MORPHY RICHARDS Breeze 300261 iron?

To fill the tank, unplug the iron and open the tank cap. Use a jug to pour water up to the maximum fill mark. Do not exceed this limit.

What should I do if the iron does not heat up?

Check that the iron is properly plugged in and that the socket is working. Make sure the thermostat is set to the desired temperature. If the problem persists, you may need to contact customer service.

How do I clean the soleplate of the iron?

Wait for the soleplate to cool down, then use a soft, slightly damp cloth. Avoid abrasive products that could scratch the surface.

What should I do if the iron is leaking water?

Make sure the tank is not overfilled. Also check that the iron is in a horizontal position during use. If the problem persists, there may be an issue with the seal or the tank.

How do I use the steam function of the iron?

To use the steam function, make sure the tank is filled with water. Set the steam button to "ON". Steam will be released when you press the steam button on the handle.

The iron emits a strange smell during use, what should I do?

It is normal for a new iron to emit a slight smell at first. If the smell persists or becomes unpleasant, unplug the iron and let it cool down. Clean the soleplate and check if any residues have burnt.

How do I store the MORPHY RICHARDS Breeze 300261 iron?

Make sure the iron is completely cool before storing it. Wrap the cord around the iron and store it in a dry, cool place out of reach of children.

Can I use tap water in the tank?

Yes, you can use tap water, but it is recommended to use distilled water if you live in an area with very hard water to avoid limescale buildup.

USER MANUAL Breeze 300261 MORPHY RICHARDS

Line drawing of a BREEZE-style iron iron with label 'morphy richards' and brand logo (no additional text or symbols)

Steam Iron

Please read and keep these instructions

www.morphyrichards.com

GB

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Keep the iron and its cord out of reach of children less than 8 years of age at all times.
• The iron must not be left unattended while it is connected to the supply mains.
• The plug must be removed from the socket before being filled with water.
• The iron must be used and rested on a stable surface.
• When placing the iron on its heel, ensure that the surface on which the heel is placed is stable.
• The iron is not to be used if it has been dropped, if there are visible signs of damage or it is leaking.
• The filling aperture must not be opened during use.

- WARNING: Burns can occur from touching hot metal, hot water or steam.

- WARNING: To avoid electric shock, do not immerse appliance in water / liquid.

Electrical requirements and mains cable

• Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating current).
• Do not operate with a damaged supply cord or grommet, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
• Do not let the mains lead come into contact with the hot soleplate of the iron.
• Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted.
  • WARNING: This appliance must be earthed.

PLEASE READ ALL INSTRUCTIONS AND KEEP FOR REFERENCE

Warning triangle with steam symbol (no text or numbers)

CAUTION! HOT SURFACE

PLEASE BE AWARE OF HOT SURFACES HANDLE WITH CARE

Treating scalds

• Run cold water over the affected area immediately.
• Do not stop to remove clothing.
- Seek medical advice quickly.

Technical diagram of an iron iron with numbered parts and a magnified inset showing internal components.

Line drawing of two iron iron machines, one with a paper clip and the other with a flat iron (no text or symbols)

2 10 NOTARHTS MIN MAX MIN

GB F D P DK S PL RU CZ TR

Technical line drawing of a mechanical component with an inset view showing internal structure (no text or symbols)

Line drawing of a steam iron with labeled parts and motion lines (no text or symbols)

Diagram of a steam iron with labeled parts and motion indicator

Diagram showing a hair iron being placed on a jacket, with numbered callouts indicating parts of the iron.

Technical diagram of an iron iron with labeled parts and numbered callouts

Simple line drawing of a iron (£) with a handle, no text or symbols present

Line drawing of a steam iron with cord and handle (no text or symbols)

Technical line drawing of a mechanical device with an inset close-up showing internal components (no text or symbols)

Line drawing of a steam iron with a cord and handle, shown in profile view (no text or symbols)

Technical line drawing of a mechanical component with an inset view showing internal structure (no text or symbols)

Features

(1) Variable steam switch
(2) Water spray button
(3) Steam boost button
(5) Self clean position
(6) Filling hole with cap
(7) Spray nozzle
(8) Soleplate
(9) Temperature dial
(10) Temperature indicator light
(11) Water tank
(12) Iron heel

(4) Auto shut-off indicator (certain models only)

Temperature guide

Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International Textile Care Labelling Code

Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting

Control dial positions Do not iron

Steam level setting (see step 3 of 'Using the iron for steam ironing')

No steam (see 'Dry ironing')

Low

Medium / High

High

Pure diagram of a symmetrical abstract shape with curved lines and internal shapes, no text or symbols present.

Abstract line drawing of a symmetrical arch-like shape with internal geometric elements (no text or symbols)

Diagram of a biological structure with curved layers and internal components (no text or labels)

Fabric Nylon, Acetates,

synthetic fabrics

Wool, Polyester mixtures

Cotton, Linen Rayon, Rayon mixtures

Ironing Iron on wrong side, if moisture required, use damp cloth (not Acetate)

Fabrics requiring this setting usually require steam pressing.

With water in tank

Steam/spray/shot of steam

Without water in tank

Before use

Remove any protective cover from the soleplate (8).

Using the iron for steam ironing

1 Make sure the iron is not plugged in. Set the variable steam switch (1) to 📁 Fill the water tank (11) via the filling hole (6).
IN HARD WATER AREAS, WE RECOMMEND A MIX OF 50% TAP WATER AND 50% DISTILLED OR DEMINERALISED WATER.
Never use battery topping up fluid or water containing any substances like starch, sugar, fragrant additives or defrosted water from a refrigerator.

2 Plug in the iron and switch on at the mains.

Set the temperature dial (9) to the temperature required (see 'Temperature Guide'). Begin with cool fabrics and work up to higher settings. An iron heats up quicker than it cools down so you will save time and energy.

Your iron is fitted with a temperature indicator light (10) which will switch on and off whilst you are ironing.

The temperature indicator light will illuminate until the required temperature is reached, then it will turn off.

3 Vary the steam output using the variable steam switch (1).

Only use the steam facility on heavy fabrics (midway between 2 and 3-dot, to MAX).

4 For stubborn creases, use the water spray button (2). You may need to press this a few times to prime the pump.

5 Steam boost

Press (3) for an extra steam boost for stubborn creases / heavy fabrics.

NOTE: If you need to use the steam boost whilst dry ironing, check the temperature dial (9) is set within the steam range.

NOTE: For optimum steam quality, do not operate the shot more than three times in succession.

Features of your iron

Dry ironing

Your iron can be used for dry ironing. Set the variable steam switch (1 to Band set the temperature dial (8) as desired ('Temperature Guide').

You won't need water in the tank unless using the water spray or steam boost features.

6 Vertical steam

Vertical steam is useful for removing creases from hanging clothes, curtains, etc. Hold the iron between 1cm and 2cm away from the item and press the steam boost button (3).

Anti-drip system

This prevents water escaping from the soleplate (6) when the iron is too cold.

During use, the anti-drip system may emit a loud click, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly.

Life long anti-scale system (certain models only)

This system reduces scale deposits and helps prolong the life of the iron.

Auto shut-off (certain models only)

The iron will automatically shut down if stationary in the horizontal position for 1 minute, or in the vertical position for 8 minutes.

When auto shut-off is activated, the indicator light (4) will flash.

Gently move the iron and it will reheat. Wait for the iron to heat-up and continue ironing.

Maintenance

To clean a stainless steel soleplate

We recommend using a generally available gentle chrome, silver or stainless steel cleaner. Always follow the manufacturer's instructions.

To clean a coated soleplate

Do not use scouring powder or solution as this could cause damage to the coating.

To clean either soleplate type

If any man-made fibres fuse to the soleplate (6), set the iron at the 3-dot position for a stainless steel soleplate, or MAX position for a coated soleplate, and pass it over a clean piece of cotton to draw the deposit off the surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp cloth and mild detergent, then wipe dry.

Emptying and Storage 7

When you have finished ironing, unplug and empty all water from your iron and set the steam switch at the position. When cool, store the iron on its heel with the cord wrapped loosely around the heel.

Self Clean

Your iron has a built in cleaning system designed to keep the water valve, steam chamber and steam vents clear of lint and loose mineral deposits.

1 Half fill the iron with water.
2 Place the iron on its heel.
3 Move the variable steam switch (1) to the 'MAX' position.
4 Connect to a mains supply outlet.

5 Set the temperature dial (9) to 'MAX'. See step 2 of 'Using your iron for steam ironing'.

6 The temperature indicator light (10) will illuminate until the required temperature is reached, then it will turn off. Wait for one more cycle - the temperature indicator light illuminates and switches off.

7 Disconnect the iron from the mains supply outlet.

8 Whilst the iron is still very hot, hold the iron horizontally over a sink.

9 Whilst still holding the variable steam switch (1) in the self clean position, gently move the iron back and forth until the water tank is empty.

WARNING: Steam and boiling hot water will drain from the

holes in the soleplate. This washes away the scale and minerals that have built up inside the steam chamber.

10 When cleaning is complete, move the variable steam switch back to the 'O' position.
11 Rest your steam iron back on its heel and allow to fully cool down.
12 Wipe the soleplate (6) with a cold, damp cloth.

After this cleaning operation, empty out any remaining water.

WARNING: Keep hands and body away from the hot water.

WARNING: Do not attempt to descale the soleplate with descaling products.

Contact us

Helpline

If you are having a problem with your appliance, please call our Helpline, as we are more likely to be able to help than the store you purchased the item from. Please have the product name, model number and serial number to hand when you call to help us deal with your enquiry quicker.

UK Helpline: 0844 871 0960

IRE Helpline: 1800 409 119

Spares: 0844 873 0726

Talk to us

If you have any questions or comments, or want some great tips to help you get the most out of your products, join us online:

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Website: www.morphyrichards.com

THIS SECTION IS ONLY APPLICABLE FOR CUSTOMERS IN UK AND IRELAND

REGISTERING YOUR TWO YEAR GUARANTEE

Your standard one year guarantee is extended for an additional 12 months when you register the product within 28 days of purchase with Morphy Richards. If you do not register the product with Morphy Richards within 28 days, your product is guaranteed for 1 year. To validate your 2 year guarantee register with us online at www.morphyrichards.co.uk

N.B. Each qualifying product needs to be registered with Morphy Richards individually. Please refer to the one year guarantee for more information.

YOUR ONE YEAR GUARANTEE

It is important to retain the retailer's receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base of the product.

Model no.

Serial no.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance

proving to be faulty within 28 days of purchase, it should be returned to the place of purchase for it to be replaced. If the fault develops after 28 days and within 12 months of original purchase, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You may be asked to return a copy of proof of purchase. Subject to the exclusions set out below (see Exclusions), the faulty appliance will then be repaired or replaced and dispatched usually within 7 working days of receipt. If, for any reason, this item is replaced during the 1 year guarantee period, the guarantee on the new item will be calculated from original purchase date. Therefore it is vital to retain your original till receipt or invoice to indicate the date of initial purchase. To qualify for the 1 year guarantee, the appliance must have been used according to the instructions supplied. For example, crumb trays should have been emptied regularly.

EXCLUSIONS

Morphy Richards shall not be liable to replace or repair the goods under the terms of the guarantee where:

1 The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturer's recommendations or where the fault has been caused by power surges or damage caused in transit.
2 The appliance has been used on a voltage supply other than that stamped on the products.
3 Repairs have been attempted by persons other than our service staff (or authorised dealer).
4 The appliance has been used for hire purposes or non domestic use.
5 The appliance is second hand.
6 Morphy Richards are not liable to carry out any type of servicing work, under the guarantee.
7 Plastic filters for all Morphy Richards kettles and coffee makers are not covered by the guarantee.
8 Batteries and damage from leakage are not covered by the guarantee.
9 The filters have not be cleaned and replaced as instructed.

This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer.

YOUR INTERNATIONAL TWO YEAR GUARANTEE

This appliance is covered by two-year repair or replacement warranty.

It is important to retain the retailers receipt as proof of purchase. Staple your receipt to this back cover for future reference.

Please quote the following information if the product develops a fault. These numbers can be found on the base of the product.

Model no.

Serial no.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.

If the fault develops after 28 days and within 24 months of original purchase, you should contact your local distributor quoting Model number and Serial number on the product, or write to your local distributor at the addresses shown.

You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase.

Subject to the exclusions set out below (1-9) the faulty appliance will then be repaired or replaced and dispatched usually within 7 working days of receipt.

If for any reason this item is replaced during the 2-year guarantee period, the guarantee on the new item will be calculated from original purchase date. Therefore it is vital to retain your original till receipt or invoice to indicate the date of initial purchase.

To qualify for the 2-year guarantee the appliance must have been used according to the manufacturers instructions. For example, appliances must have been descaled and filters must have been kept clean as instructed.

The local distributor shall not be liable to replace or repair the goods under the terms of the guarantee where:

1 The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturers recommendations or where the fault has been caused by power surges or damage caused in transit.
2 The appliance has been used on a voltage supply other than that stamped on the products.
3 Repairs have been attempted by persons other than our service staff (or authorised dealer).
4 Where the appliance has been used for hire purposes or non domestic use.
5 The appliance is second hand.
6 The local distributor are not liable to carry out any type of servicing work, under the guarantee.
7 The guarantee excludes consumables such as bags, filters and glass carafes.
8 Batteries and damage from leakage are not covered by the guarantee.
9 The filters have not be cleaned and replaced as instructed.

This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer.

AUSTRALIAN WARRANTY

This appliance is guaranteed for 2 years against faulty material, components and workmanship.

This warranty is in addition and does not affect your statutory rights. Proof of purchase must be produced for any warranty benefit.

In the unlikely event of any appliance proving to be faulty, securely pack and return the item to the place of purchase accompanied by the original receipt or invoice.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

NOT COVERED BY THIS WARRANTY

(Australian only)

• If the appliance has not been used in accordance with the manufacturers' recommendations or Instructions.
• If the fault is deemed to be caused by abuse, misuse, neglect, modifications or in proper use and or care Eg: Kettles: Excessive build up of scale.
  Toasters: Excessive build up of crumbs or foreign matter etc.
  • Connection to incorrect voltage to that stamped on the product.
  • Unauthorised repairs.
  • Appliance used other than for domestic purposes.
  • Excluding bags, filters, glass, carafes, and cutting blades.
  • Freight and insurance costs.

If for any reason this item is replaced during the 2 year guarantee period, the guarantee on the new item will be calculated from original purchase date. Therefore it is vital to retain your original receipt or invoice to indicate the date of original purchase.

Morphy Richards's policy is to continually improve quality design and product quality. The company therefore reserves the right to change any specifications or to carry out modifications as deemed worthy at any time.

The Australian supplier ASKO Appliances reserves the right to repair, modify, exchange or replace the faulty appliance with the same or similar model or product of equivalent value.

Warning sign with steam symbol inside a triangle, indicating heat or smoke hazard

DANGER! SURFACE CHAUDE

ATTENTION SURFACES CHAUDES MANIPULER AVEC PRÉCAUTION

Blog : www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter : www.twitter.com/loveyourmorphy

Site Internet : www.morphyrichards.com

VOTRE GARANTIE DE DEUX ANS

Warning triangle with steam symbol (no text or numbers)

VORSICHT!

HEISSE OBERFLÄCHE

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Mittel / Hoch

Abstract diagram with curved lines and central shapes, no text or symbols present

Hoch

Diagram of a biological structure with curved layers and internal components (no text or labels)

Stoff

Bügeln

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Warning sign depicting steam rising inside a triangle, indicating heat hazard

CUIDADO! SUPERFÍCIE QUENTE

TENHA CUIDADO COM AS SUPERFÍCIES QUENTES MANUSEIE COM CUIDADO

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Abstract line drawing of a symmetrical arch-like shape with internal geometric patterns (no text or symbols)

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Blogue: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Website: www.morphyrichards.com

A SUA GARANTIA DE DOIS ANOS

Warning sign with steam symbol inside a triangle, indicating heat or smoke hazard

ATTENZIONE! SUPERFICIE ROVENTE
ATTENZIONE ALLE SUPERFICI ROVENTI MANEGGIARE CON CAUTELA

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Abstract line drawing of a symmetrical arch-like shape with internal geometric patterns (no text or symbols)

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Sito web: www.morphyrichards.com

GARANZIA DI DUE ANNI

Warning sign with steam symbol inside a triangle, indicating heat or smoke hazard

FORSIGTIG! VARM OVERFLADE

VÆR OPMÆRKSOM PÅ DE VARME OVERFLADER, DER SKAL HÄNDTERES MED FORSIGTIGHED

Abstract diagram with curved lines and internal shapes, no text or symbols present

Abstract line drawing of a symmetrical arch structure with internal components (no text or symbols)

Diagram of a biological structure with curved layers and internal components (no text or labels)

Stof Nylon, acetat, syntetiske stoffer Uld, polyesterblandinger Bomuld, linen rayon, rayonblandinger

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Website: www.morphyrichards.com

DIN TOÅRIGE GARANTI

Warning sign depicting steam rising inside a triangle (no text or symbols)

SE UPP! HET YTA

SE UPP FÖR ALLA HETA YTOR HANTERA FÖRSIKTIGT

Simple line drawing of a symmetrical abstract shape with curved lines and internal shapes (no text or symbols)

Abstract line drawing of a symmetrical arch structure with internal symmetrical elements (no text or symbols)

Diagram of a biological structure with layered components and internal structures (no text or labels)

Tyg Nylon, acetater,

syntetfiber

Ylle, polyesterblandningar,

Bomull, linne, rayon, rayonblandningar

Strykning

Blogg: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Warning triangle with steam symbol (no text or numbers)

UWAGA! GORACA POWIERZCHNIA
UWAGA NA GORACE POWIERZCHNIE UŻYWAĆ OSTROŻNIE

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Strona internetowa: www.morphyrichards.com

DWULETNIA GWARANCJA

Warning triangle with steam symbol (no text or numbers)

ОСТОРОЖНО!

ГОРЯЧАЯ ПОВЕРХНОСТЬ

Abstract line drawing of a symmetrical arch structure with internal geometric elements (no text or symbols)

Abstract line drawing of a symmetrical abstract shape with curved lines and central elements (no text or symbols)

Diagram of a biological structure with layered forms and internal components (no text or labels)

Ткань

Блог: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Веб-сайт: www.morphyrichards.com

Warning sign depicting steam rising inside a triangle, indicating heat hazard

UPOZORNĚNÍ! HORKÝ POVRCH

POZOR NA HORKÉ PLOCHY JE NUTNÉ OPATRNÉ ZACHÁZENÍ

Ošetření opařenin

Diagram of a symmetrical abstract structure with curved lines and central elements (no text or symbols)

Střední/Vysoká

Abstract line drawing of a symmetrical abstract shape with curved lines and central elements (no text or symbols)

Vysoká

Diagram of a biological structure with curved layers and internal components (no text or labels)

Tkanina Nylon, acetáty,

syntetické tkaniny

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Warning sign depicting steam rising inside a triangle, indicating heat hazard

DİKKAT! SICAK YÜZEY

LÜTFEN SICAK YÜZEYLERE DİKKAT EDİN DİKKATLİ KULLANIN

Yanıklara müdahale

Pure diagram of a symmetrical mechanical or electrical component with no text, numbers, or symbols

Orta / Yüksek

Abstract line drawing of a symmetrical arch-like shape with internal geometric patterns (no text or symbols)

Yüksek

Simple line drawing of a symmetrical abstract shape with internal lines and shapes, no text or symbols present.

Kumap Naylon, Asetatlar,

sentetik kumaplar

Buhar/sprey/buhar püskürtme

TR

Kuru ve sprey

Depoda su olmadan

Kuru ütüleme

Kullanmadan önce

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Web sitesi: www.morphyrichards.com

Morphy Richards products are intended for household use only. See usage limitations within the location sub-heading in the important safety instructions. Morphy Richards has a policy of continuous improvement in product quality and design. The Company, therefore, reserves the right to change the specification of its models at any time.

The After Sales Division,

Morphy Richards Ltd, Mexborough, South Yorkshire, England, S64 8AJ Helpline (office hours) UK 0845 871 0960 Republic of Ireland 1800 409119

Glen Dimplex Australia

Unit 1, 21 Lionel Road, Mount Waverley, Victoria 3149 T: 1300 556 816 E: [e-mail]

Glen Dimplex New Zealand

38 Harris Road, East Tamaki, Auckland, New Zealand T: 09 2748265 E: [e-mail]

KuGaNa Logistics Sp. z o.o.

UL. Kleczewska 37 62-510 Konin Poland T: [phone]

GB For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country.

www.morphyrichards.com