Alloy FPS Pro - Keyboard HYPERX - Free user manual and instructions

USER MANUAL Alloy FPS Pro HYPERX

• Wrist restDocument No. 480HX-KB2001.A01 HyperX Alloy Elite Mechanical Gaming Keyboard Page 3 of 7

Keyboard Installation:

1- Connect both USB connectors to the computer.Document No. 480HX-KB2001.A01

HyperX Alloy Elite Mechanical Gaming Keyboard Page 5 of 7

Function Keys Secondary Feature

Change the LED Backlight brightness. There are 4 levels of brightness: OFF, low, medium and high.

Switch between the LED backlight modes.

Enable Game Mode to disable the Windows key and prevent accidental interruption during gaming. When Game Mode is enabled the indicator will illuminate.

Play/pause , skip backwards or skip forward while listening to music or watching videos.

Mute computer audio.

LED backlight modes: There are six LED backlight modes: ► Solid (default) ► Breathing ► Trigger ► Explosion ► Wave ► Custom. Solid: Constant lightning (default setting). Breathing: Slow rhythmic blinking that mimics breathing. Trigger: Individuals keys will light up when pressed and slowly fade after one second. Explosion: A lighting effect will radiate from individual keys when pressed. Wave: Keys will light up from left to right in a wave pattern. Custom: You can choose which keys you want to light up.

Follow these steps to customize:

1- Switch the backlight mode to Custom.

2- Hold until the backlight turns off.

3- Press the key or keys you want to have backlight ON.

4- When finished, press again to save your custom backlight profile.

Keyboard factory reset: If you are experiencing any issue with the keyboard you can perform a factory reset. You will lose your custom LED profile by doing this. Function Keys Secondary Feature