I.Beat xtension FM - Mp3 player TrekStor - Free user manual and instructions

Frequently Asked Questions - I.Beat xtension FM TrekStor

USER MANUAL I.Beat xtension FM TrekStor

2) Connecting the TrekStor i. Beat xtension to a PC

Note for users of Windows® 98: First download the driver from our homepage at http://www.trekstor.de. Then install the driver before connecting the i.Beat xtension to your PC!

Connect the i.Beat xtension to a USB port of your PC. Your operating system will immediately recognize the i.Beat xtension and will add two "devices With RemovAble StorAge" under "My CoMputer" (i.Beat xtension + SD/MMC memory card).

3) Exchanging data with the TrekStor i. Beat xtension

a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right mouse button ("copy").
b) Under "My CoMPuter" select the device with removable storage "tREKStor 1.beAt xtension".
c) Click it with your right mouse button, and select "paste" to start copying. After copying is over, the data will be available on the i.Beat xtension.

Note: Do not under any circumstances disconnect the USB connection during data transfer!

4) Logging off and disconnecting the TrekStor i. Beat xtension from the PC

Windows® 98 (SE): Click in the lower right of the task bar, on the symbol "SAfely reMove hArdWAre". In the "SAfely reMove hAdwAre" window, select the i.Beat xtension and click on the "yes" button. You can now disconnect the i.Beat xtension from the PC.

Windows® 2000/ME/XP: At the bottom right on the task bar, click the right mouse button on the symbol "SAfely Remove hArdWare". In the context menu that appears, click the left mouse button on "SAfely Remove MAss StorAge device - drive" to select it. You can now disconnect the i.Beat xtension from the PC.

Note: Please follow the recommended logoff procedure to prevent damage to the device or data loss!

5) Firmware update for the TrekStor i. Beat xtension

a) Connect the i.Beat xtension to a USB port of your PC.
b) Back up all the important files on your i.Beat xtension onto your PC.
c) You can update the i.Beat xtension with the most current firmware from the internet (on the TrekStor homepage at http://www.trekstor.de).
d) Download the firmware (*.zip-file), and unzip it to a folder of your choice.
e) Follow the attached update instructions.

Warning: Please read all the update instructions, and follow the update procedures exactly to keep from damaging the i.Beat xtension!

6) Formatting the TrekStor i. Beat xtension

a) Connect the i.Beat xtension to a USB port of your PC.
b) Back up all the important files on your i.Beat xtension onto your PC.
c) Open "My CoMputer", and click your right mouse button on "devices With RemovAble StorAge".
d) Select "f orMAt..." from the context menu.
e) Select the "fAt32" option under "fileSystem" from the dialog window that appears.
f) Click the "s tAπ" button to start the formatting.

7) Using the TrekStor i. Beat xtension

Turning the device on and off

Turn on the i.Beat xtension by briefly pressing the button. To turn the i.Beat xtension off, hold the button for approximately 3 seconds.

Note: Make sure that the HOLD switch has been moved to the left, i.e., that the button lock is turned off. If the button lock is activated, the button lock symbol or a corresponding message will appear.

Different modes

The i.Beat xtension has different modes. To go to a mode, hold the (MENU) button for approximately one second. Press the (or button to select the desired mode, and confirm by briefly pressing the (按钮. Leave the menu by pressing the (MENU) button.

Mode: Music

Switch to the "MUsic" mode.

-Playback

Briefly press the button to start playing back an audio file.

- Pause

Briefly press the button to stop playback. Repress the button to continue playback.

- Change track

Press the button to select the next song. Press the button to select the previous song.

- Fast-forward / rewind within a track

You can navigate within the current song by holding down the or button. Hold down the or button to fast-forward or rewind.

Note: The longer you hold down the + + or + - button, the faster you fast-forward or rewind.

- Increase / lower volume

Briefly press the + or - button to raise or lower the volume.

Note: If you hold down the ① or ② button, the volume changes gradually.

Folder navigation

You get to folder navigation in "Mucic" mode by briefly pressing the MENU button. Switch between the internal memory and external memory (SD/MMC card) by pressing the or button, and confirm by pressing the button. Press the or button to select the next or previous file. To play the selected file, press the button. To change to a subfolder, press the button if the folder is marked. To return to the main directory, briefly press the MENU button. To leave folder navigation, press the MENU button when you are in the Main Directory.

- Deleting a file

Select the file you want to delete using folder navigation, and briefly press the REC button. To confirm that you want to delete the file, press the < to the left or the button to the right to go to "yes", and then press the button.

Mode: FM Radio (optional)

Switch to "FM Radio" mode.

Note: Always connect your earphones to the i.Beat xtension FM since the earphone cable serves as an antenna for the internal radio.

Briefly press the M button to open a menu. You can now start the automatic station search, save stations and delete them. To leave FM radio mode, hold the M button for about one second, and the main menu will appear.

Automatic memory assignment / automatic station search

To start the automatic station search, switch in the menu to "Scan Station" and confirm by pressing the button. The i.Beat xtension FM now automatically searches for the radio stations with the strongest reception and saves them in 30 memory locations.

- Switching between manual station selection and memory mode

Briefly press the button to switch between manual station selection "scAn" and memory mode "preset".

- Switching between saved stations

In "preset", you can switch between available presets by briefly pressing the 1 or button.

- Manually change frequency / manual search

In "scAn" briefly press the 14 or 15 button to change the reception frequency by 0.1 MHz. Hold down the 14 or 15 button for the i.Beat xtension FM to automatically scan the upper and lower frequencies for stations with the strongest reception.

- Saving individual stations

Change to manual station selection "scAn". Choose the desired frequency and select "Save station" from the menu. Select a preset using the 14 or button and press the button to save the station.

- Deleting saved stations

Select "delete Station" from the menu. Then select an existing preset using the 14 or 15 button and confirm the deletion by pressing the 16 button.

- Recording FM radio

Briefly press the REC button to start recording FM radio. Briefly press the REC button again to stop recording.

Note: All FM recordings are saved in the "FM" folder of the iBeat xtension FM.

Note: In folder navigation, select the storage location "Internal Memory" to make FM recordings.

Mode: Recordings

Switch to the "recordings" mode.

In this mode, you can play voice recordings and optionally FM radio recordings.

You can record your voice using the integrated microphone. Hold the REC button for approximately 1 second to start recording. To pause the current recording, briefly press the button. To restart the current recording, briefly press the button again. Briefly press the REC button to stop recording.

Note: All voice recordings are saved in the "Mlc" folder of the i.Beat xtension.

Note: In folder navigation, select the storage location "Internal Memory" to make voice recordings.

The operation and functions in this mode are like the "MUsic" mode.

Mode: Settings

Switch to the "settings" mode.

In this mode, you can configure the equalizer, play mode, display settings, sleep timer, automatic shutdown and record settings.

Press the or button to select the desired setting, and confirm by briefly pressing the button. Leave the settings by pressing the button.

Equalizer

You can select from 6 preset equalizers under the menu item "eQualizeR".

-Playbackmode

You can select from 6 preset play modes under the menu item "Play Mode".

Display

Contrast: Under the menu item "contrAst", you can adjust the contrast of the LC display.

Backlight: Under the menu item "Backlight", you can set the length of time until the display automatically shuts off.

Title information: Under the menu item "title information", you can set the information (file name or ID3 tag information) that is to be shown on the display.

- Sleep timer

Under the menu item "Sleep tiMeR", you can set how long the player should wait before it automatically shuts off.

- Shutdown

Under the menu item "shut down", you can set how long the player should wait when it is not used before it automatically shuts off.

Record settings

You can set the recording quality for the integrated microphone and the FM radio under the menu item "record settings".

Mode: System

Switch to the "System" mode.

In this mode, you are provided with information on the memory and the installed firmware version. In addition, you can change the user language, the load defaults, and delete the entire memory.

Memory / FW

Under the menu item "Memory / fW", you are given information on the entire memory and free memory, and the installed firmware version.

Language

Under the menu item "IAngUAge", you can select the menu language of the player.

- Default settings

Under the menu item "IoAd defAults", you can restore the original settings of the i.Beat xtension. The saved files are not deleted when you do this.

Delete all

Under the menu item "delete All", you can delete all of the files on the i.Beat xtension.

Notes:

This MP3 player is optimized for the provided headphones (32 Ohm impedance). Using other earphones with a lower impedance can damage the MP3 player or earphone, especially MP3 players with 2 earphone jacks.
- Exposing the unit to an electrostatic discharge, may interrupt the data transfer between the unit and the computer. If this occurs, the unit should be unplugged from the USB port and then plugged in again.
Note: This device can produce high volumes. To prevent hearing loss, do not listen to high volumes for long periods. If you notice a ringing noise in your ears, lower the volume immediately or stop using the MP3 player. Please keep in mind that using earphones or headphones at loud volumes may result in permanent hearing loss. While you become accustomed to higher volumes over time, so that they may seem normal to you, your sense of hearing can still be impaired. The higher you adjust the volume, the faster your sense of hearing can be damaged.
Note: Using earphones while driving a motor vehicle is not recommended and is prohibited in some countries. Always drive carefully and with full concentration. Stop using your MP3 player if you become distracted or interrupted by it when driving a motor vehicle or during other activities that require your full attention.
- Do not use USB cables longer than 3 meters.

The manufacturer retains the right to continually improve the product. These changes may be made without being directly described in these operating instructions. For this reason, the information provided in these operating instructions may not reflect the current state of the art.

The manufacturer only guarantees suitability for the product's intended purpose. In addition, the manufacturer is not responsible for damages or loss of data and subsequent consequences.

Copyright © 2007 TrekStor GmbH & Co. KG. All rights reserved. Other cited product or company names may be trademarks or brand names of the respective owner.

NOTICE D'UTILISATION

A operacao e as funcaoesnesto mode sao identicas as do mode "MusicA".

Modo:Definições

Valtson at "Zene" Üzemmodba.

Lejatszás

• 14 Cent/Min. aus dem deutschen Festnetz der DTAG
  ** Please check with your local telephone provider for connection costs.