VG SIS 2 - Iron Venga - Free user manual and instructions

Product Type	Steam iron with base and tank
Brand	Venga
Model	VG SIS 2
Power Supply	220-240 V ~ 50/60 Hz (standard estimate)
Power	Not specified (estimate ~2000-2500 W)
Tank Capacity	Not specified (estimate ~300 ml)
Main Functions	Dry ironing, steam ironing, continuous steam jet, vertical steaming, steam regulator, adjustable thermostat
Safety	Lock for steam jet button for continuous use, stable base, power cord with grounding plug
Maintenance	Clean soleplate with a soft damp cloth; do not use abrasive products; built-in anti-calc system
Soleplate Type	Not specified (likely stainless steel or ceramic)
Removable Tank	Yes, with handle for easy filling
Power Cord	Length not specified (estimate ~2 m)
Weight	Not specified (estimate ~1.5 kg)
Dimensions	Not specified (estimate ~30x15x20 cm)
Noise Level	Not specified (normal pump noise)
Standby Consumption	Not specified (turn off after use)
Materials	Plastic for body, metal for soleplate
General Information	Household use only; read manual before use; do not immerse

Frequently Asked Questions - VG SIS 2 Venga

How to fill the water tank?

Lift the tank by the small handles, open the cap, pour clean water without exceeding the MAX level. Close and replace the tank in the base keeping it straight.

Why does water drip from the soleplate?

The steam regulator may be set too high for a low temperature, or the iron is not hot enough. Set the thermostat to a higher position and wait for the indicator light to turn off.

How to use the vertical steam jet?

Set the thermostat to maximum (•••) for vertical steam. Hang the garment, hold the iron vertically a few centimeters away and press the steam jet button while moving the iron.

What to do if the soleplate is dirty?

Clean it with a soft damp cloth. If residues persist, use a specific product for iron soleplates. Never use abrasive powder.

How to descale the iron?

The iron is equipped with an anti-calc system. For deep cleaning, fill the tank, set the thermostat to maximum, let it heat for 10 minutes, then emit steam jets for 30 seconds, repeat twice. Then empty the tank.

Can I use tap water?

Yes, the anti-calc system filters the water. However, for better longevity, distilled water is recommended.

How to adjust the temperature for different fabrics?

Check the garment label. For synthetics (low temperature), wool (medium), cotton/linen (high). Always start with the most delicate fabrics.

The iron's indicator light does not turn off, is that normal?

Yes, the indicator light turns on and off regularly to maintain the temperature. This means the iron is working correctly.

Can I fill the tank while ironing?

Yes, but for safety reasons, turn off and unplug the appliance before removing the tank. Fill it and put it back before plugging in again.

What to do if the appliance does not produce steam?

Check that the steam regulator is on and there is enough water in the tank. Wait for the iron to heat up (indicator off). If the problem persists, contact after-sales service.

USER MANUAL VG SIS 2 Venga

Please read these instructions carefully before using the appliance.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

Check that Zoizr main voiteage corresponds to that stated on the appeiance.
Never eave the appliance znszpvresed nhen in zse.
AnaS p-ace the base of the apoience on a stab-e ironing board, tabe or on the groznd.
OnZ connect the appliance to a main earthed hao-ssocket.
To avoid a circuit overoad, do not operate another high nattage appiance on the same circuit.
The iron sha●be zsed and p-aced on a stab●e-eve sfrface.
When zo z pace the iron on its sipport, make sre that the szrface on nich zo z pzt it is stab e.
Do not zse the iron if it has faen, if it shons anz visib-e signs of damage or if it eaks.
If an estension cord is absozte Z necessar, a 10-ampere or higher cord sho zed be zsed. Never zse cords rated for -ess than 10-ampere. Care sho zed be taken to arrange the cord so that it cannot be pz ed or tripped over.
Never eave the appliance znszpvised hhen snitched on and espcia●Z the steam iron nhen it is heating. qep ozt of reach of chldren or incompetent persons.
From time to time check the cord for damages. Never zse the appliance if cord or appliance sho's anz signs of damage. In that case, repairs sho 念 be made b 念 a competent qza 念 ified e 念 Electrician. Sho 念 d the cord be damaged, it m 念 t be rep 念 aced b 念 a competent qza 念 ified service".
On-2 zse the appiance for domestic pprpos and in the na indicated in these instrcions.
Never immerse the iron or the base in nater or anz other -iqid for anz reason nhatsoever.
Never zse the appliance near hot szrfaces.
Do not aon pon er cord and cord binding the base to the steam iron to toch hot szrfaces.
Never zse the appliance oztside and a-naZs pace it in a dr environment.
Never zse accessories that are not recommended bZ the producer. The coz.d constitutie a danger to the zser and risk to damage the appliance.
Never move the appliance bz pz-ing the cord. zake sre the cord cannot get cazght in an n2 rna2.Do not nird the cord aroznd the appliance and do not bend it.
Fz*Z znnind the main cord and szpp*Z hose before starting to iron.
A-naZs znpzg the appeiance nhen it is not in zse.
Bzns can occcr from loching hol meta parts, hot nater, or steam.
Añázs p·ace the iron on the base of the appliance, on the therefore foreseen p·ace. Do not p·ace iron bZ its rear cover. Be szre that it does not come in contact nith f·ammab e materia s or nith the main cord.
Never fi the steam tank nith vinegar, descaiing agents or other chemicaes.
Before the first zse, remove anz sticker or protective foit from the soepate. Cean the soepate nith a soft coth.
Some parts of the iron have been sightZ greased and as a reszt the iron might sightZ smoke nhen snitched on for the first time. After a short nhie, honever, this ni- cease.
The iron sha●● be zsed and p●aced on a slab●e●eve● szrface.

Do not zse the iron if it has faen,if it shons anz visib-e signs of damage or if it eaks.
When zoz p-ace the iron on its szpport (if avaiab-e nith the mode), make sre that the szrface on nich Zo z pzt it is stabe.
Proceed the same naz if the nater tank stops norking or is damaged. To avoid the risk of e-ectric shock, do not disasemb-e the iron or steam tank, take it to a qza-ified technician for examination and repair. Incorrect re-assemb-z can caze a risk of e-ectric shock nhen the iron or steam tank is zsed.
Fz-2 znind the main cord and szpp-2 hose before starting to iron.
The ponier snitch sho d a n z s be pzt in position "0" before p zgging or znp zgging the ponier cord from ozt et.
Unp g the appliance and a on the iron and the nater tank to coo do _n before c eaning or storing them and for presszried steam iron station (depending on the mode ) before opening, fi ing or empt ng the nater tank.
FOR PRESSURIZED STEAM IRONING STATION (DEPENDING ON THE MODEL), NEVER OPEN THE CAP OF THE STEAM TANK WHILE THE APPLIANCE IS CONNECTED TO THE MAINS WALL SOCKET AND ESPECIALLY WHEN STEAM IS BEING PRODUCED.

(1) Competent qzaified service: after saes department of the producer or importer or anz person nho is qzaified, approved and competent to perform this kind of repairs in order to avoid a** danger. In anz case Zo2 sho2d retzn the appliance to this service.

BEFORE THE FIRST USE

We recommend c-eaning the iron before the first zse as fo-ons: fi- the nater tank, pzt the temperatzre diao on position "eINEN" and the steam regz-ator on zAX and et the iron heat for 10 minztes. When the temperatzre has been reached, take the iron from the base, ho-d it vertica- and keep the steam bztton pressed for 30 seconds, then nait 30 seconds and repeat this czc-e trice.
Snitch off the appliance (snitch in position "0"), znpzg it and et it coo dohn szfficient Z, then cean the soepate nith a damp coth.

STEAM IRON: PRECAUTION FOR USE AND TEMPERATURES

• A#nazs check first if a •abe• nith ironing instrzctions is attached to the article that needs to be ironed. Fo•on these ironing instrzctions in a•• cases.
  If ironing instructions are missing bzt Zoiz knon the kind of fabric, then see the tabe for recommended ironing temperatzres.

Kinñ oë tîxfilż Tîmpżi ěturż NiEI StîşEm ironinš
Nylon	žIN	NO
Synthètic (e.g. acetate, acržic, viscose, požamide, požESTer, ...)	II
Silk	●
	II
Wool	II	YES
	●●
	II
Cotton Linżn	II	YES
	●●●
	II
	žAX

VG SIS 2-101214

• P g in the appliance and pzt the snitch (1) in position "I" to snitch it on. The poner ight of the snitch (1) and the pzmp pi ot ight (2) ni ight zp , indicating that the appliance is norking and the iron is heating. Set the temperatze dia of the iron (5) to the desired position, the indicator amp of the iron (8) ni ight zp . As soon as the desired temperatze is reached, the pi ot ight of the iron ni go ozt and Zo can start ironing.
  Dzirng ironing this pioot ight (8) nio come on from time to time. When this happens, the soepate is being heated zp to the required temperatze again. Yoz can continze ironing.
  The tabe-e is vaid for the fibre materiais on. If some kind of finish has been appied (goss, nirk-e, reief etc), the testie can best be ironed at a ooner temperatze. First sort ozt the fabrics according to ironing temperatze: noo-nith nooo, cotton nith cotton, etc.
  The iron heats zp qzicker than it coo's donn. Therefore, start ironing the artiees reqiring the onest temperatze szech as those made of sztthetic fibres. Then progress to the higher temperatzes.
  If the artiee is made of a mistre of different fibres, Zoiz mzt a na zseect the onest ironing temperatze of the composition of those fibres. (E.g. an artiee consisting of 60% poZester and 40% cotton" shozi d be ironed at the temperatze indicated for poZester and nithozt steam.) If zo do not knon nhat kind(s) of fabric(s) the artiee has been made of, find a spot, nich nbe invisibe nhen nearing or zing the artiee to trz ozt the ironing temperatze. (AnaZs start at a on temperatze and increase to one nwhich gives the required reszts.)
• Pzre noo•en fabrics (100% noo) maZ be pressed nith the iron set to a steam position. It is recommended to app•Z shot-of-steam and zse a drZ pressing c•oth. When steam-ironing noo•en fabrics, shining of the fabric maZ occzr. This can be prevented bZ tznirg the artic•e inside ozt and ironing the inside or bZ interposing a •ight damp c•oth.
  Vevet and other testres that rapidZ aczire shinZ spots shozed be ironed in one direction onZ (nith the nap), appZing onZight presszre. AnaZs keep the iron moving.
• Iron the reverse side of sZnthetic materia s and si k, it is not advisab e to zse steam as this ma caze stains.

FILLING WITH WATER (FOR STEAM-IRONING)

1. Pzt the base on a stab-e szrface.
2. Use the sma● grips (4) of the nater tank to take ozt the nater tank. Open the cap (7) and fi● the nater tank nith c●ear nater zp to its "zas"●eve. Do not fi● beZond this masimzm ●eve! Yoz can zse tap nater, bzt ne advise ZoZ to zse disti●ed nater.
3. Cose the cap (7) of the nater tank.
4. Pzt the nater tank back in the base correct Z. zake szre to keep it zpright in order to avoid spi ing nater. Press the grips znti the nater tank is ocked in p ace.
5. Never zse vinegar, detergents or other chemica* products.

FILLING THE WATER TANK DURING USE

As the nater tank of this appliance is not znder presszre, ZoZ can refi it dzring ze. To do so, snitch off the appliance, znp zg it and jzst proceed as described above in the "Fi-ing nith nater" section. When ZoZ have pzt the nater tank back in pace, p-zg the appliance in again, snitch it on and nait zntie the indicator amp of the iron goes ozt. Then ZoZ can start ironing again.

STEAM-IRONING

Fi the nater tank nith nater and insert the mains p-zyg into a na-● socket.
- As indicated on the temperatRé diae (5) and in the tabe, steam ironing is on-2 possibe at higher ironing temperatres, so set the diae to or .
Pzt the shitch (1) in ON position ("1") and set the temperatzre dia of the iron (5) to the desired position. When the iron has reached the desired temperatzre, its piotight (8) nio go ozt. Yoz can non zse the steam fznction.
Tzrn the steam contro- knob (12) to regz-ate the amozt of steam. Note: the masima-steam rate ("ZX") can onZ be zsed nhen the ironing temperatze is higher than position 000, or e-se nater ni-drip from the soe.
- Press the steam bztton (6) to re-ease steam from the soepate of the iron. Re-ease the bztton and the steam nih stop. If Zoiznant a continzots jet of steam, press the steam bztton donn and side its transparent top part backnards so that the steam bztton ocks. To stop the continzots jet of steam, pzh the transparent part of the bztton fornards again and re-ease the steam bztton.
- When ironing, the piotight of the iron (8) nio go on and off from time to time. This means that the temperatze of the iron is regzated biz its thermostat. Yoz can continze ironing. The pzmp piotight ni aso go on and off, indicating that the steam pressre is being regzated.
- When zoź zse a •ot of steam in a verz short time, the steam oztpzt is •ight•redzced znti• Zožr ap-.iance prodzces enozgh steam to redzce the difference. This phenomenon a so happens nhen there isn't enoizgh nater in the nater tank.
- When the nater tank is rznning emptZ, Zo'ni● hear more noise nhen pressing the steam bztton. If Zo'nant to go on zing the steam fznction, Zo'ni● have to refi● the nater tank.

STEAMING IN A VERTICAL POSITION

Position the temperatre dia on its masimzm -eve for vertica steam ironing. The steam rate can be adjusted according to ZoZr needs.
YoZ have to hang the coth ZoZnant to smooth ozt avoiding the creases and pace the iron in a vertica position at a fen centimetres from the piece of coth. Then move the iron and press the bzt of steam bztton at the same time.

DRY IRONING

• P g in the appearance and snitch it on (poner snitch in position "I").
• Use the temperatère dia to set the temperatère needed.
• When the indicator -amp of the iron goes ozt for the second time, Zož can start ironing.
• For ironing nithozt steam, -eave the steam contro- knob in OFF position and do not press the steam bztton (6).

WHEN FINISHED IRONING

We recommend c-eaning the iron after zse as fo-ons: fi- the nater tank, pzt the temperatzre dia- on position "eNEN" and the steam regz-ator on zAX and eT the iron heat for 10 minztes. When the temperatzre has been reached, take the iron from the base, ho-d it vertica- and keep the steam bztton pressed for 30 seconds, then nait 30 seconds and repeat this cZc-e thice.
- Snitch off the appliance (poher snitch in position "0"). znp · zg the appliance and et it coo · doin.
- Emptz the nater tank.
We recommend pacing the iron on its base nhen ZoZ store it. The therefore foreseen pace is non-sip and ni not damage the soepate of the iron.

ANTI-CALC DEVICE

• Yožr appliance is eqipped nith an anti-cač device ●ocated inside the nater tank. As a resz●t, Zož can Že tap nater as it nii● be fiftered bZ the device.
• Nvzur usz thz EppliEncz without wEtztEnk!

CLEANING

The pastic parts of the appiance can be c-eaned nith a damp coth.
To c-ean the soepate of the iron, zoz nio find specific products in the shops. P-ease a-so read the instrctions of zse. Never zse abrasive products to c-ean it.
- Nžvžr immzrs zh EppliEncz in wEtlz or Eny othz liquiN.

TROUBLE-SHOOTING

Proqlüm Possiqlż cEusz Solution
While fɔozr comes ozt of the soepate	This is norma- nhen the iron is nen The fɔozr is not harmfze- and niz- disappear after a feñ times
Water drips from the soepate nhen steam ironing	When Žoz start steam ironing, the steam filter is sti- coo- and the steam niz- coo- dofnn This is norma- after a feñ seconds, the steam jet niz- be Oq. Yo'z can pzt the iron on an o-d c-oth to start so that the nater is absorbed
No steam comes ozt of the steam tank	The steam contro- knob has not been tzned on or there is not eno- zhg nater in the nater tank T'zn the steam contro- knob to the desired position or fi- the nater tank and nait znti- the indicator -ight of the iron goes ozt
No steam comes ozt of the iron nhen the steam bztton is pressed	When ironing at a high temperatzre, steam nith a too high temperatzre cannot be seen P'zt a mirror znder the soepate to check if steam comes ozt
The soepate is dirtz Impzrities in the nater adhere to the soepate or the temperatzre is too high for the c-othes	C-ean the soepate nith a soft, damp c-oth or adjzst the temperatzre

PROTECTION OF THE ENVIRONMENT-DIRECTIVE 2002/96/EC

In order to preserve ozt environment and protect hman heath, the naste eectricae and electronic equipment shoed be disposed of in accordance nith specific rzes nith the

implication of both szppiers and zers. For this reason, as indicated bz the szmbo n the rating abe or on the packaging. ZoZr aprience shoed not be disposed of as znsorted mznicipa naste. The zser has the right to bring it to a mznicipa coeection point performing naste recoverz bz means of rezse, reczcoing or zse for other appications in accordance nith the directive.

FR MODE D'EMPLOI

POUR VOTRE SECURITE

DISPOSITIF ANTICALCAIRE

WATERRESERVOIR VULLEN (OM MET STOOM TE STRIJKEN)

Team International Romania Srl;

Str.Industrilor 56A, sector 3, Bucuresti CUI 16991287; R.C. J40/19685/29.11.2004

VG SIS 2-101214

VG SIS 2

Deutsch	4
English	10
Français	15
Nederlands	21
Espanol	27
Português	33
Italiano	39
Polska	44
Română	49

Venga