070498 - Shaver BRAUN - Free user manual and instructions

Brand	Braun
Model	070498
Product type	Electric shaver with Clean&Renew self-cleaning system
Power supply	Rechargeable battery (up to 50 minutes cordless); power cord with transformer plug
Runtime	Up to 50 minutes of cordless shaving
Charging temperature	5 °C to 35 °C
Main functions	Wet/dry shaving, pivoting head, retractable trimmer for long hair, sensitive (white) and intensive (dark blue) settings, display screen with charge and hygiene segments
Cleaning	Clean&Renew self-cleaning system: automatic cycles (32-43 min) with drying, quick cycle (25 sec) without drying; manual cleaning under running water possible
Indicators	Charge level (6 segments), hygiene level (6 segments), cassette replacement indicator, cleaning cycle indicator lights
Safety	Integrated transformer; do not modify components; cleaning liquid flammable (keep away from ignition sources); keep out of reach of children
Spare parts	Shaving cassette 70S, Clean&Renew CCR cleaning liquid cartridge
Cassette lifespan	Approximately 18 months (replacement indicator on display)
Warranty	2 years (excluding normal wear and damage from improper use)
Maintenance	Automatic or manual cleaning; replace cartridge approximately every 8 weeks; occasional lubrication (sewing machine oil) if regular water washing
Included accessories	Clean&Renew station, power cord, travel case, cleaning brush

Frequently Asked Questions - 070498 BRAUN

How to clean the Braun 070498 shaver?

You can use the Clean&Renew self-cleaning system: place the shaver in the station, the system automatically selects the appropriate cycle (duration 32-43 min) or use the quick clean (25 sec). You can also rinse the head under running water after unplugging the shaver, optionally using non-abrasive liquid soap.

How to charge the shaver?

The shaver charges automatically when placed in the plugged-in Clean&Renew station. You can also plug it directly via the power cord. A full charge provides up to 50 minutes of cordless shaving. The ideal temperature is between 5°C and 35°C.

What to do if the shaver does not charge?

Check that the station is plugged in and that the contacts between the shaver and the station are clean. Make sure the cleaning cartridge is properly inserted. If the problem persists, contact an authorized Braun service center.

How to use the Clean&Renew self-cleaning system?

Install a cleaning liquid cartridge in the station. Place the shaver in the station (contacts aligned). The system analyzes cleanliness and lights an indicator: economy clean, normal, or intensive. Press the 'clean & dry' button to start the cycle. You can also use the 'fast clean' button for a quick clean without drying.

When should the shaving cassette be replaced?

Replace the cassette (ref. 70S) when the replacement symbol lights up on the display, which occurs approximately every 18 months. After replacement, press the reset button on the back of the shaver for 3 seconds to reset the counter.

How to reset the cassette replacement indicator?

Use a pen to press the reset button (mark 15) for at least 3 seconds. The indicator flashes then goes out. Resetting can also be done manually at any time.

Can I use the shaver in the shower?

The shaver can be cleaned under running water, but it is not designed for use in the shower. For water cleaning, unplug the shaver and rinse the head. Shaving should be done dry or with foam, but not immersed.

How to adjust the sensitive or intensive settings?

Use the + (intensive) and - (sensitive) buttons on the shaver. The switch indicator changes color: dark blue for intensive, light blue for normal, white for sensitive. The last setting is remembered.

What to do if cleaning liquid leaks from the cartridge?

Place the station on a flat, stable surface. If the cartridge leaks, replace it immediately. The liquid is flammable: avoid ignition sources and do not smoke nearby. Clean up spills with a cloth.

Where can I buy cleaning cartridges or spare parts?

Clean&Renew CCR cleaning cartridges and the 70S shaving cassette are available at authorized Braun retailers or Braun service centers. Visit www.braun.com to find a store near you.

USER MANUAL 070498 BRAUN

(Audio Supplies Company Ltd.)

www.service.braun.com

Deutsch

Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun Shaver.

Warning

Your shaving system is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock.

This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are supervised by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.

To prevent the cleaning fluid from leaking, ensure that the Clean&Renew station is placed on a fl at surface. When a cleaning cartridge is installed, do not tip, move suddenly or transport the station in any way as cleaning fluid might spill out of the cartridge. Do not place the station inside a mirror cabinet, nor over a radiator, nor place it on a polished or lacquered surface.

The cleaning cartridge contains a highly fl ammable liquid so keep it away from sources of ignition. Do not smoke near the station. Do not expose to direct sunlight for long periods of time.

Do not refill the cartridge and use only original Braun refill cartridges.

Description

Clean&Renew station

① Cleaning fluid display
② Lift button for cartridge exchange
③ Station-to-shaver contacts
④ «clean & dry» button
48 «fast clean» button
⑤ Cleaning program indicators
⑥ Station power socket
⑦ Cleaning cartridge

Shaver

⑧ Foil & Cutter cassette
Cassette release button
⑩ Shaver head «lock» switch
⑪ Pop-out long hair trimmer

⑫ On/off switch
⑬ «sensitive» (-) setting button
(14) «intensive» (+) setting button
⑤ Reset button
⑥ Shaver display
⑦ Shaver-to-station contacts
⑱ Shaver power socket
⑨ Travel case
20 Special cord set

Before shaving

Prior to first use you must connect the shaver to an electrical outlet using the special cord set ② or alternatively proceed as below.

Installing the Clean&Renew station

• Using the special cord set ② , connect the station power socket ⑥ to an electrical outlet.
• Press the lift button ② to open the housing.
• Hold the cleaning cartridge ⑦ down on a fl at, stable surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge into the base of the station as far as it will go.
• Slowly close the housing by pushing it down until it locks.

The cleaning fluid display ① will show how much fluid is in the cartridge:

"high" up to 30 cleaning cycles available "low" up to 7 cleaning cycles remaining "empty" new cartridge required

Charging and cleaning the shaver

Insert the shaver head down into the cleaning station. (The contacts ① on the back of the shaver will align with the contacts ③ in the cleaning station).

If required, the Clean&Renew station will automatically charge the shaver. The hygiene status of the shaver will also be analyzed and one of the following cleaning program indicators ⑤ will light up:

"clean" shaver is clean

串 short economical cleaning required
normal level of cleaning required
忍 high intensive cleaning required

If the station selects one of the required cleaning programs, it will not start unless you press the «clean & dry» button ④. For best shaving results, we recommend cleaning after each shave.

Whilst cleaning is in progress, the respective cleaning program indicator will blink. Each cleaning program consists of several cycles, where cleaning fluid is flushed through the shaver head and a heat drying process dries the shaver. Depending on the program selected the total cleaning time will range from 32 to 43 minutes.

The cleaning programs should not be interrupted. Please note that whilst the shaver is drying, the shaving head may be hot and wet.

When the program is finished, the blue «clean» indicator will light up. Your shaver is now clean and ready for use.

Fast cleaning

Push the «fast clean» button 4a to activate the fast clean program without drying. This program takes about 25 seconds only and is recommended when you do not have time to wait for one of the automatic cleaning programs. If you remove the shaver just after the program has fi nished, wipe off the shaver head with a tissue to avoid dripping.

Stand-by mode

10 minutes after completing the charging or cleaning session, the Clean&Renew station switches to the stand-by mode: The indicators of the Clean&Renew station turn off.

Shaver display

The shaver display 16 shows the charge status of the battery on the left, and the hygiene status on the right. (6 dark segments are shown on each side when the battery is fully charged and the shaver is hygienically clean).

Battery segments:

During charging or when using the shaver, the respective battery segments will blink. When fully charged all 6 segments are shown. With decreasing charge the segments gradually disappear.

Low charge indicator:

The «low» charge indicator provided with a red frame blinks to indicate that the charge has dropped below 20% . The remaining battery capacity is suffi cients for 2 to 3 shaves.

Hygiene segments:

All 6 hygiene segments will appear after the shaver has been cleaned in the Clean&Renew station. When the shaver is being used, the hygiene segments will gradually disappear. Once the shaver is returned to the station, the system will automatically select the appropriate cleaning program and restore the segments to maximum hygiene. Given that rinsing the shaver under tap water is not as hygienic as the cleaning station, the hygiene segments will only restore themselves when the shaver has been cleaned in the Clean&Renew station.

Charging information

• A full charge provides up to 50 minutes of cordless shaving time. This may vary according to your beard growth.
• The best environmental temperature for charging is between 5^ to 35^ . Do not expose the shaver to temperatures higher than 50^ for extended periods of time.

Personalizing your shaver

Personalizing your shaver

With the «sensitive» 13 and «intensive» 14 buttons you can choose the best setting for shaving different areas of your face and as per your specific needs. The different settings are indicated by the pilot light incorporated in the on/off switch 12:

• «Intensive» = dark blue (powerful shave)
  Normal light blue
• «Sensitive» = white (for a thorough comfortable shave in sensitive areas of your face such as neck)

For a thorough and fast shave we recommend the «intensive» setting.

Pressing the + or - button activates your preferred setting. When switching on next time, the last used setting will be activated.

How to use

Press the on/off switch 12 to operate the shaver:

• The pivoting shaver head and fl oating foils automatically adjust to every contour of your face.
• To shave hard to reach areas (e.g. under the nose) slide the shaver head «lock» switch ⑩ to the back position to lock the pivoting head at an angle.
• To trim sideburns, moustache or beard, slide the pop-out long hair trimmer upwards.

Tips for the perfect shave

For best shaving results, Braun recommends you follow 3 simple steps:

1. Always shave before washing your face.
2. At all times, hold the shaver at right angles (90^) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.

Shaving with the cord

If the shaver has run out of power (discharged), and you do not have the time to recharge it in the Clean&Renew station, you may also shave with the shaver connected to an electrical outlet via the special cord set.

Cleaning

Automatic cleaning

After each shave, return the shaver to the Clean&Renew station and proceed as described above in the section «Before shaving».

All charging and cleaning needs are then automatically taken care of. With daily use, a cleaning cartridge should be suffi cients for about 30 cleaning cycles.

The hygienic cleaning cartridge contains alcohol, which once opened will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately 8 weeks.

The cleaning cartridge also contains lubricants, which may leave residual marks on the outer foil frame after cleaning. However, these marks can be removed easily by wiping gently with a cloth or soft tissue paper.

Manual cleaning

The shaver head is suitable for cleaning under running tap water.

Warning: Detach the shaver from the power supply before cleaning the shaver head in water.

Rinsing the shaving head under running water is an alternative way to keep the shaver clean, especially when travelling:

• Switch the shaver on (cordless) ⑫ and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver, press the release button ⑨ to remove the Foil & Cutter cassette ⑧ and let it dry.
• If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the Foil & Cutter cassette.

Alternatively, you may clean the shaver using the brush provided:

• Switch off the shaver. Remove the Foil & Cutter cassette ⑧ and tap it out on a fl at surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the cassette with the brush as this may damage it.

Cleaning the housing

From time to time clean the housing of the shaver and the Clean&Renew station with a damp cloth, especially inside the cleaning chamber where the shaver rests.

Replacing the cleaning cartridge

After having pressed the lift button ② to open the housing, wait for a few seconds before removing the used cartridge to avoid any dripping. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.

Keeping your shaver in top shape

Replacing the Foil & Cutter cassette/reset

To maintain 100% shaving performance, replace the Foil & Cutter cassette (8), when the replacement symbol lights up on the shaver display (16) (after about 18 months) or when cassette is worn.

The replacement symbol will remind you during the next 7 shaves to replace the Foil & Cutter cassette. Then the shaver will automatically reset the display.

After you have replaced the Foil & Cutter cassette, use a ball-pen to push the reset button 15 for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time.

Accessories

Available at your dealer or Braun Service Centres:

• Foil & Cutter cassette 70S
• Cleaning cartridge Clean&Renew CCR

Environmental notice

This product contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

The cleaning cartridge can be disposed with regular household waste.

Subject to change without notice.

This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.

For electric specifications, see printing on the special cord set.

Guarantee

We grant 2 years guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose.

This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor.

This guarantee does not cover: damage due to improper use, normal wear and tear (e.g. foil & cutter cassette) as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used.

To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre.

For UK only:

This guarantee in no way affects your rights under statutory law.

Français

Supporto Clean&Renew

scheerapparaat is schoon

«» korte economische reiniging is nodig
常 normalereinigingisnodig
Intensieve reingiring is nodig

Räd for perfect barbering

[e-mail]

Ta npoiovta pa cataokeuacovtai etai wotv a nnpouv ta uynlntepa npotuna noiotnac, 8itoupyikotnac kai oxediaoou. Eanizoue va ikavonointhe anoluta ano mva kauovpyia oac Eupiotkunxavn Braun.

PpoeiDonoio

H Eupiotikn oac mnxavn eival epoiaouevn me
eva elidko oet kaawdiou, to onoio diathetai
evomegaatwveoetaaoynuotn nou xannc
taonc yia nepiootepn aoopaia. Ia tov
loyo auto dev npenei va avtkataohtnoete
n tpononoieoet oeoiobnonote epoc tou.
εavtiethn nepiTTwn unapxekivduvo
nAekponlaia

Autn n ouokun den pnoopieetai yia xpnon ano naia n atoua m e uwuevcs owaatakec n diavontikec icavotntec, ktoc av eniBentovta ano atouno unufovo yia tnva aopaalau touc. Evika, ouviotouve va kpatate tvv ouokun akpi a n o naia.

Tia va anopuyete onoiabnnotdiappon tou uypou kaapioou, tootheintote m ouokean Clean&Renew oε μia επineδη επiavεia. Mny yepve tμεtakiveite gapvika m ouokean, e onoiovnonote trpno, evexi tonoetnte i nθη kaoetata kaapioou. Mny tonoetente m ouokean oTo papi Tou kaheptm oa navw ano kalopipep np oe yuaioevesc epiaveiesc n epiaveiesc kaumuevesc μe bepviki.

H ouokun kaapioou npiex e xiaepetika eupkto uypo. KpatnoT nV maKpia ano nnye c avapEnc. Mnv kaVizTe kovTa otnv ouokun. Mnv ekTeTc T ouokun aea oe aoiakn akivobolia yia eya lo xpvikó diaotma.

Mnv EavayeIeT Nv naia kaoet a e To Uypo kaapou. Xpnoonoiite mvo yna a vtaaaktka Tc Braun.

περιγραφή

Σuστημa Clean&Renew