REDMI 9C NFC - Cellphone Xiaomi - Free user manual and instructions

Product type	Mobile phone
Brand	Xiaomi
Model	Redmi 9C NFC (M2006C3MNG)
Operating system	MIUI (based on Android)
Network	4G LTE, dual nano-SIM
Battery	Built-in, charging via 5V/2A adapter
Power adapter	Input 100-240 V~, Output 5 V / 2 A, 10 W
Main functions	Calls, SMS, Internet browsing, camera, NFC
Maintenance	Keep dry, use between 0°C and 40°C
Safety	SAR: head 0.370 W/kg, body 1.140 W/kg (5 mm), limbs 2.280 W/kg (0 mm)
Warranty	24 months
Legal information	Compliant with Directive RE 2014/53/EU and FCC

Frequently Asked Questions - REDMI 9C NFC Xiaomi

How to turn on the phone?

Press and hold the power button to turn on the device. Then follow the on-screen instructions to set up the device.

How to insert the SIM cards?

The phone supports two nano-SIM cards. Insert the cards into the designated slots. Do not use non-standard cards.

What types of SIM cards are compatible?

Only nano-SIM cards are compatible. Dual 4G SIM is supported by some operators.

How to charge the battery?

Use only the supplied power adapter and cable. Plug in the adapter, then connect the cable to the phone. Charging should not exceed 12 hours. Disconnect after charging.

What is the SAR value of this phone?

Maximum SAR values are: head 0.370 W/kg, body 1.140 W/kg (at 5 mm), limbs 2.280 W/kg (at 0 mm). Compliant with European limits.

Can I use the phone in the rain?

No, keep the device dry. Do not use it in high humidity areas like a bathroom. The operating temperature range is 0°C to 40°C.

How to update the software?

The system can be updated automatically via the built-in software update function. Go to Settings > About phone > System update.

What to do if the battery is deformed or damaged?

Stop using the device immediately. Do not disassemble the battery. Contact Xiaomi customer service or an authorized repair center.

What is the warranty period?

The phone is warranted for 24 months. Visible damage (shocks, oxidation) is not covered. For more information, visit www.mi.com.

Can I use the phone while charging?

It is not recommended to make calls while charging, as this may present a risk of electric shock or injury. Disconnect the charger before calling.

USER MANUAL REDMI 9C NFC Xiaomi

Thank you for choosing Redmi 9C NFC

Long press the power button to turn on the device.

Follow the on-screen instructions to configure the device.

For more information, visit our official website:

www.mi.com/global/service/userguide

MIUI

Redmi 9C NFC comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

SIM Card Tray:

About Dual SIM:

• Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
  Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
• VoLTE is only supported by telecom operators in certain regions.
• System may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
  WARNING: Do not disassemble this device.

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.

To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of

material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Additional safety information and precautions can be accessed at

the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
• This device's operating temperature range is 0^ to 40^ . Using this device in an environment outside of this temperature range may damage the device.
• If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Disposc of or recycle the device, its battery, and accessories according to your local regulations.

• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.

• Do not short circuit the battery, as this may cause overheating, burns, or other injury.

• Do not place the battery in a high-temperature environment.

• Overheating may cause explosion.

• Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.

• Do not burn the battery, as this may cause fire or explosion.

• If the battery appears deformed or damaged, stop using it immediately.

• User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.

• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring "two-way radios" or "electronic devices" to be turned off to prevent potential hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device's operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone's operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

CE

Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi M2006C3MNG is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

RF Exposure Information (SAR)

This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W / kg specified in Council Recommendation 1999/519/EC, ICINRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5mm .

SAR compliance for body operation is based on a separation distance of 5mm between the unit and the human body. This device should be carried at least 5mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0W / Kg SAR Value:Head:0.370 W/Kg.Body:1.140 W/Kg5 mm distance).

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
Usability of this device may be restricted depending on the network provider.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20km from the centre of Ny-Ålesund.

Receiver Category 2

Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

GSM 900:35 dBm

GSM 1800:32 dBm

UMTS band 1/8:25 dBm

LTE band 1/3/7/8/20/38/40:25.7 dBm

Bluetooth:20 dBm

Wi-Fi 2.4 GHz band: 20 dBm

NFC: 13.56 MHz < -21.19 dBuA/m at 10m

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W / Kg . For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.0cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

E-label

This device has an electronic label for certification information.

To access it, please go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Model: M2006C3MNG

2006 indicates that this product will be launched after 202006.

Adapter

Manufacturer (1): Jiangsu Chenyang Electron Co., Ltd.

address (1): No.58 Chenyang Road,Hexi Industrial Park,Huangtang

Town,212364 Danyang City,Jiangsu Province,PEOPLE'S REPUBLIC OF CHINA

Manufacturer (2): Jiangxi Jian Aohai Technology Co., Ltd.

address (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P. R.China, 343900

Model: MDY-09-EW

Input Voltage: 100-240V

Input Frequency: 50/60Hz

Output Voltage: 5.0V

Output Current: 2.0A

Output power:10.0W

Average active efficiency: ≥ 79.04%

Disclaimer

This user guide is published by Xiaomi or its local affiliated company.

Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice.

Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

02 48

SAT.16 AOUT.

Boutons de volume

www.mi.com/global/service/userguide

MIUI

Adresse (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town, 212364

Danyang City, Province de Jiangsu, REPUBLICIQUE POPULAIRE DE CHINE

Fabricant (2): Jiangxi Jian Aohai Technology Co., Ltd.

Adresse (2): Xietian, Quanjiang Town, Suichuan, Jian City, P. de Jiangxi, R. de Chine, 343900

Modèle: MDY-09-EW

019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

02 48

SAB.16 AGO

Pulsanti del volume

www.mi.com/global/service/userguide

MIUI

indirizzo (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town, 212364

Danyang City, Jiangsu Province, REPUBBLICA POPOLARE CINESE

indirizzo (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, REPUBBLICA

POPOLARE CINESE,343900

Modello: MDY-09-EW

Tensione in uscita: 5,0 V

Corrente in uscita: 2,0 A

www.mi.com/global/service/userguide

MIUI

www.mi.com/global/service/userguide

MIUI

Adresse (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town,

212364 Danyang City, Jiangsu Province, VOLKSREPUBLICK CHINA

Hersteller (2): Jiangxi Jian Aohai Technology Co., Ltd.

Adresse (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, Volksrepublik

China, 343900

Model: MDY-09-EW

www.mi.com/global/service/userguide

MIUI

Adres (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town, 212364

Danyang City, Jiangsu Province, PEOPLE'S REPUBLIC OF CHINA

Fabrikant (2): Jiangxi Jian Aohai Technology Co., Ltd.

Adres (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P. R. China, 343900

Model: MDY-09-EW

Ingangsspanning:100-240V

Ingangsfrequentie: 50 / 60Hz

www.mi.com/global/service/userguide

MIUI

www.mi.com/en/about/environment

AVISO

RISCO DE EXPOSAO S ARE A BATERIA FOR SUBSTITUIDA ORU TM UPIO INCORRETO. ELIMINE AS BATORIAS USADAS DE ACORDO COM AS INSTRUÇÉS.

SAR limite 10 g:2,0 W/kg

Endereço (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town, 212364

Danyang City, Jiangsu Province, PEOPLE'S REPUBLIC OF CHINA

Fabricante (2): Jiangxi Jian Aohai Technology Co., Ltd.

Endereço (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P. R.China, 343900

Modelo: MDY-09-EW

Tensao de entrada: 100-240 V~

Frequencia de entrada: 50 / 60Hz

www.mi.com/global/service/userguide

MIUI

Limit SAR 10 g:2,0 W/kg

Wartosc SAR:Glowa:0,370 W/kg, cialo:1,140 W/kg (odlegtosc 5 mm).

Informacja prawne

Siuuovon (1): No.58 Chenyang Road,Hexi Industrial Park,Huangtang Town,212364

Danyang City, Jiangsu Province, PEOPLE'S REPUBLIC OF CHINA

Kataoekuaot(2): Jiangxi Jian Aohai Technology Co.,Ltd.

δειθυνη (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P. R.China, 343900

Movélo: MDY-09-EW

Táon 100-240V~

LxuyoTaiaoou:50/60Hz

Tao :5,0V

Peuα eδou:2,0A

IoXuc 2660ou:10,0W

www.mi.com/en/about/environment

FIGYELEM

A NEM MEGELETO TIPUSU CSERAKKUMULATOR HASZNALATA ROBANASVESZELYE.

A HASNZALT AKKUMULATORT AZ UTASITASOK SzerINT ARTALMATLANITSA.

cim (1): No.58 Chengyang Road, Hexi Industrial Park, Huangtang Town, 212364 Danyang City, Jiangsu Province, PEOPLE'S REPUBLIC OF CHINA

Gyarto (2): Jiangxi Jian Aohai Technology Co., Ltd.

cim (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P. R.China, 343900

Model: MDY-09-EW

www.mi.com/global/service/userguide

MIUI

www.mi.com/en/certification

adresa (1): No.58 Chenyang Road,Hexi Industrial Park,Huangtang Town,212364

Danyang City, Jiangsu Province,R.P. CHINEZÄ

Producator (2): Jiangxi Jian Aohai Technology Co., Ltd.

adresa (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, R.P. Chineză, 343900

Model: MDY-09-EW

Tensiune isire: 5,0 V

Current de isire: 2,0 A

www.mi.com/global/service/userguide

MIUI

Ha Redmi 9CNC nonepehbo Tcbaonbolo MIUI - hnaa onepaui cyntemy ha63ai Android, tko achoo HONOBTAE Ta BKNKOAKOPKHHU KHOHOBI dYBQIKN noad200 mblnoikohtaknHNHkOKPCHUYAIB 8yco8o CBTy. UO6 dHAnTHRC 6bnue, bBiaDAtae chei en.miu.lnl.

ЛотOKдЯ SIM-картн:

IhOpmaizipno nipntpumky DBOx SIM-kaPrt:

P608y doxy SIM-KaptoK y pexkmi 4Gd nprtnmyh lyne dekei onepoata mbo1hno 383kay, Ly dyaiknur maoye dytsocdyho h he yxcj periohan.
-Платимма БхдakтКал�SIM.Якови КрсовучТьгOTСБФДGAСТЛDA 斯МСКAPK.Быб-як.TAKРКТМСОЕPRIHSAHTYCHINOCBOHNOB.
- Φικητιον VOITE πάρτημουγθον onepatorρον M60bɪŋHOrO 8a3aɪy nuɪe Bδεκxh περιαλα.
Cytememy MOJE bTyI aTOMATNUHO OHOBNEH OJRA 3a63e3neuH NTHOTMAHBOI BOPTOI MEPEKI. UOb OTPMAHIT DeaJIbHI BIDMOCTI, DINB. BEPCIO CHTEMM, JKA BMKOPKTCHYETCB NpIrcNTPOEM.
H e BCTAANTIe HectaLAPHTH SIM-KAPKTKN B CLOT JAR SIM-KAPKTKN BOHN MOKytB. nooukOdiN CNTJ DRAI SIM-KAPKTKN.
- PONEPENKHH! He po36npaTe ue npncptpi.

Bixdoen eJeKeTpunHoro n eJeKtpoHHoro 6naHaHHa (WEEE)

JIeN pIeTbIe MAc EneKToHnO nO3hAny 3 iHOpMuaQIO npo CTePHiaQIO.
LIOp OTOPMATMO HeJOTocYN, NocIOBDOH BnEepiHO "HalaunTyBaHNHa" "ItoP
TeneDOnP" "CTePHiaQIO" aBO b6eBHO "HalaunTyBaHNHa" raBeDIn "CTePHiaQIO"
BpaKy oNuXy.

Mодь: M2006C3MNG

MapkyBaHHa 2006 03Hauac, 10 ue Bnpi6 3'ABTbcHa pNkY nicra 202006.

Aanrep

Bip06Hk (1): Jiangsu Chenyang Electron Co.,Ltd.

Adeca (1): No.58 Chenyang Road, Hexi Industrial Park, Huangtang Town, 212364

Danyang City, Jiangsu Province, PEOPLE'S REPUBLIC OF CHINA (Kunai)

Bupobn (2): Jiangxi Jian Aohai Technology Co.,Ltd.

Apeca (2): Xietian, Quanjiang Town, Suichuan, Jian City, Jiangxi, P.R.China, 343900 (Kittai)

Modenb: MDY-09-EW

Bxidha Hanpyra:100-240 B~

Bxidha qactota:50/60T

BuxiHa Hanpyra:5,0 B

BnxiDHH CTpyM:2,0A

BuxiHa NotyHicr:10,0BT

CepenHnAaTbHnKKD:≥79,04%

BiIMOBA BiD BiINOBiDaJIbHOCti

Leta onci6nok Koprctybaa OrynbioKoHOMKA KOHOMKA Xaia 0b0 iMceBoo apinibOKO HOMKAHO. KopuaeeHHa TzMHIN BOTO onci6nok HOKOPCTYBA aOBMOHNI TINORAPcKaKMMN NOMIKAMKA, HETOHOCSTRM ABO nONIOEHWM nporpAMn/Ho/a6oBndHAA To MOKyBHOCHTNOMK HOMKA Xaia B6b-kyrKnaC hac 63e NobODMHEJI. Ptope, Ta kimi 3Hdy BkIOHOH B HOBI OHANH-BepcTBCN oNCi6nok KoprctybaA (detahnyh IInopmaQuDy. Na HB eSt-croPiTHw www.m1.com/global/service/userguide). Yci inociptaHaHADKOTcN Maue dor BoDAIXK, HACPRAID NPCTPI MOKE doeo BIDIPITNCHD bIb6OAKPEW

02 48

SUB. 16. AVG.

Gudmag
za jacini
zvuka

Dugme za ukiudicvanje/ iskuiudicvanje

www.mi.com/global/service/userguide

MIUI

Redmi 9C NFC ima unaped instaliari MIUI, naš pralagodeni operativni sistem zasnoxan na systemdu Android, koji ma ďesta zhāuriranjai j funcjke pralagodene korisinica zasnoxane na prelozima við od 200 milona aktivnih korisnika sism věseta. Za við informajca posette n.emui.dk

Lezieste za SIM karticu:

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address:

019, 9th Floor, Building 6, 33 Xi'erqi Middle Road,

Haidian District, Beijing, China, 100085

Brand: Redmi

Model: M2006C3MNG

© Xiaomi Inc. All rights reserved.