TURBO VAPEUR - Steam Sterilizer BABYMOOV - Free user manual and instructions

USER MANUAL TURBO VAPEUR BABYMOOV

Hotline (only for France):

0473283737

Designed and engineered

by Babymoov in France

FONCTIONS

• Warms efficiently any kind of bottles and jars thanks to its exclusive system : steam comes from the tongue in order to ensure an homogeneous temperature.

• 2 in 1: bottle warmer and steriliser.

• Powerful

• At home: 320W / 230V
  -Incar:100W/12V.

Universal: for all types of baby bottles.
- Safe: automatic stop when the cycle is complete.

SAFETY INSTRUCTIONS

• Never leave your child without supervision while the appliance is working.
• Check that your electrical power supply voltage is compatible with the appliance (see the details indicated beneath the appliance).
• Only use the appliance to heat baby bottles jars and sterilize baby bottles and accessories. Any other use might prove dangerous.
• Never start the appliance without water. Never switch on the appliance before pouring in a sufficient quantity of water.
• Never add any product of any kind (salt water, medication, detergents) to the water: this will damage the appliance.
  Always wash your hands before preparing a bottle.
• Never use the bottle warmer in damp surroundings and do not place directly under the tap. Never immerse the appliance in water or any other liquid.
• Never leave the appliance close to any source of heat such as radiators, sunny windows, etc.
• Always use the bottle warmer on a completely flat and dry surface.
• Use this bottle warmer in household only. Do not use the bottle warmer outdoor.
• Don't leave the bottle or jar to heat too long.
• The bottles will be very hot when they come out of the warmer. Take care when removing them.
• Never move the appliance while it is working or if it contains hot water.
• During the heating process the appliance can get very hot. Apart from the handle and switch, do not touch it.

Always unplug the appliance before cleaning or filling it.
- Unplug the appliance after use every time, to avoid any risk of starting it accidentally.
- Keep it out of reach of children because during and after operation it contains extremely hot steam. Check that the power cable is out of reach too.
Children should be supervised to ensure that they do not play with the appliance.
- Do not use the lid's knob to lift up the appliance.
- Always place uncovered bottles (without teat or cap) inside the appliance. Always remove the lid from jars.

For using in car:

• Never use the bottle warmer while the vehicle is in motion.
• Leave your engine running when using the bottle warmer to avoid draining your battery.
• The car adapter cord is specially designed for this bottle warmer: never use it with other appliances.
• Regularly check that the cigarette lighter socket in your car. Clean it if necessary.
• If you have just used your car's cigarette lighter, allow it to cool for five minutes in the open position before plugging in with the bottle warmer.

WARNING

• This appliance is designed to be used for domestic and suchlike applications such as:

• kitchen areas reserved for personnel in stores, offices and other professional environments,
  -farms,

• use by hotel, motel customers and other accommodation environments,

• bed and breakfast environments.

• If the power supply cable gets damaged it must be replaced by the manufacturer, the after-sales service or people with similar qualifications, in order to avoid any risk of danger.

• The quantities given in the table are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce or increase the quantities of water.

N.B.: the material and the thickness of the bottle and the presence of a removable base are elements that can affect the bottle's temperature.

• ATTENTION: to eliminate the risk of burns, always check the temperature of the food before giving it to your baby. For a bottle, shake it well to mix the milk. Pour a drop onto the inside of your wrist to check its temperature. For a jar, mix the contents and try it in order to check it is not too hot.
• This appliance is not intended for use by persons (including children) with impaired physical, mental, or sensory abilities, or by persons lacking in experience or knowledge, unless the person responsible for their safety has supervised and instructed them in the use of this appliance.
• Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with un-sorted household waste, but dispose of it at a selective collection point.

• This marking indicates that this product should not be disposed with other household wastes throughout the EU.

COMPOSITION

a. Lid's handle
b.Lid
c. Bottles stand

d. Measuring cup / steam tongue

e. « On » button

f. Grille

g. Grille's handle
h. Car adaptor plug

HOW TO USE

BOTTLE WARMER

At home

1. Open the lid (b) thanks to its handle (a).
2. Take out the measuring cup (d). Fill it with water, following the quantities instructions below.

Amount of milk in the bottle	Amount of water to be put in the measuring cup for BW for bottle content in room temperature	Amount of water to be put in the measuring cup for BW for bottle content in fridge temperature
60 ml	6 ml	11 ml
90 ml	8 ml	12 ml
120 ml	9 ml	13 ml
150 ml	9.5 ml	14 ml
180 ml	10 ml	15 ml
210 ml	11 ml	15.5 ml
240 ml	12 ml	16 ml
270 ml	13 ml	16.5 ml
300 ml	14 ml	17 ml
330 ml	15 ml	18 ml
Jar	Amount of water to be put in the measuring cup for BW for baby jar in room temperature	Amount of water to be put in the measuring cup for BW for baby jarin fridge temperature
120 g	10 ml	16 ml
200 g	13 ml	18 ml
250 g	18 ml	25 ml

1. Remove the stand (c).
2. Remove the grille (f) from the bottle warmer.
3. Pour the water into the water tank.
4. Put the grille (f) back on the tank.
5. Hold the grille's handle (g) to CLOSE the grill by turning it anti-clockwise. This will ensure that the steam goes through the steam "steam tongue" (d).
6. Put the stand (c) in the bottle warmer.
7. Insert the measuring cup/steam tongue (d).
8. Place the bottle inside the stand, without teat and cap.
9. Close the lid (b).
10. Lock it by turning it anti-clockwise.
11. Plug the appliance into mains. Press the "On" button (e) to start the cycle. The lamp will illuminate to show that the appliance is working. It will go out automatically and an audible alarm will tell you that the cycle is complete.
12. Hold the lid's handle (a) and turn it clockwise to unlock the lid.
13. Remove the bottle or jar carefully; it will be hot.
14. For a bottle, add the milk powder, and place the teat and cap on the bottle. Shake it to ensure an even temperature and to mix the milk with the water.
15. Always check the temperature of the food before giving it to your baby.

In car

• Stop the car / vehicle and keep the engine running.
• Place the Bottle Warmer on a flat and stable surface inside your car and vehicle.
• Then carry out steps 1 to 17 described above, taking care to reduce the amount of water in the measure by a few millilitres (between 2 and 4ml), and replacing step 13 by the following instructions:
• Connect the Car Adaptor Plug (h) on to the power cord of the bottle warmer. Plug the Car Adaptor Plug into the cigarette socket. Press the "On" button (e) to start the cycle. The lamp will illuminate to show that the appliance is working. It will go out automatically and an audible alarm will tell you that the cycle is complete.

The heating cycle will take longer than when using at home (average time: 10 minutes).

STERILISER

In order to sterilize perfectly, the following points are essential:

• Always wash your hands before preparing a bottle.
• Complete sanitization is only guaranteed when the process has not been interrupted.
• Use tap water with no added product.
• Before any sterilization process, it is important to wash all the bottles and accessories, rinse them with cold water then empty them.
• Even the slightest trace of milk provides a breeding ground for bacteria.

At home

1. Open the lid (b) thanks to its handle (a).
2. Take out the measuring cup (d).
3. Remove the stand (c).
4. Remove the grille (f) from the bottle warmer.
5. Pour 30ml of water into the basin, using the measuring spoon (1/2 1 measuring spoon) or a feeding bottle.
6. Put the grille (f) back on the tank.
7. Hold the grille's handle (g) to OPEN the grill by turning it clockwise. This will ensure that the steam comes out from the bottom of the appliance, directly inside the bottle.
8. Place the bottle upside-down on the grille (f). Arrange the accessories around the bottle.
9. Close the lid (b) and lock it by turning it anti-clockwise.
10. Plug the appliance into mains. Press the "On" button (e) o start the cycle. The lamp will illuminate to show that the appliance is working. It will go out automatically and an audible alarm will tell you that the cycle is complete.
11. Hold the lid's handle (a) and turn it clockwise to unlock the lid.
12. Remove the bottle carefully; it will be hot.
13. For optimum sterilisation, we would advise carrying out a second sterilisation cycle.

In car

• Stop the car / vehicle and keep the engine running.
• Place the Bottle Warmer on a flat and stable surface inside your car and vehicle.
• Repeat steps 1 - 13 as above, replacing step 10 by the following instructions :
• Connect the Car Adaptor Plug (h) on to the power cord of the bottle warmer. Plug the Car Adaptor Plug into the cigarette socket. Press the "On" button (e) to start the cycle. The lamp will illuminate to show that the appliance is working. It will go out automatically and an audible alarm will tell you that the cycle is complete.

MAINTENANCE

Cleaning

• Never submerge the appliance in water, and don't fill it right up with water.
• Use a slightly damp cloth to clean the inside and outside. Never use any kind of detergent to clean the inside and outside.
• The measuring cup and stand can be washed in the dishwasher.

De-scaling

Do not use any de-scaling products.

Depending on how hard the water used is and after a certain period of time, a layer of scale may build up in the tank. In order for the appliance to work properly, the tank needs to be de-scaled regularly.

Proceed as follows: mix 100 ml hot water with 100 ml white vinegar and pour it all into the tank. Leave to act for 30 minutes then empty the appliance. Then use a damp cloth to clean it.

IN CASE OF ANY LITTLE PROBLEM

The bottle warmer doesn't heat up:

• check the "On" button to make sure it is properly switched on,
• check that the appliance is properly plugged in,
• check that there is not too much scale in the tank, and de-scale if necessary.

The warming cycles are too short or too long:

There is not enough or too much water: adapt the amount of water in the tank.

m = 311

m = 311

Na Unióna Europeia, este symbologo indica que este produitsne ser de得益ado no lixo nem misturado com o lixo dométrico;dehyde ser objecto de recolha selectiva.