ATTIX 961-01 - Industrial vacuum cleaner NILFISK - Free user manual and instructions
Find the device manual for free ATTIX 961-01 NILFISK in PDF.
Download the instructions for your Industrial vacuum cleaner in PDF format for free! Find your manual ATTIX 961-01 - NILFISK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATTIX 961-01 by NILFISK.
USER MANUAL ATTIX 961-01 NILFISK
ATTIX 9 STD This document This document contains the safety information relevant for the appliance along with a quick reference guide. Prior to using the appliance for the first time, be sure to read this document through and keep it ready to hand. Further support Detailed information on the appliance can be found in the operating instructions, which you can download from our web site at www. nilfisk-alto.com. For further queries, please contact the Nilfisk- Alto service representative responsible for your country. See reverse of this document. Important safety instructions Symbols used to mark instructions Danger that leads directly to serious orirreversible injuries, or even death.
Danger that can lead to serious injuries or even death.
Danger that can lead to minor inju- ries and damage. The appliance must + only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating it + only be operated under supervision + not be used by children Do not use any unsafe work techniques. .… Never use the vacuum cleaner without a filter. Switch off the appliance and disconnect the mains plug in the following situations: - Prior to cleaning and servicing - Prior to replacing components - Prior to changing over the appliance D =
- If foam develops or liquid emerges Besides the operating instructions and the bind- ing accident prevention regulations valid in the country of use, observe recognised regulations for safety and proper use. Purpose and intended use The appliance is suitable for picking up dry, non- flammable dust and liquids. Do not use the ATTIX 963-21 ED XC to pick up liquids. The appliance is suitable for commercial use, such as e.g. in - Hotels, schools, hospitals, factories, shops, offices, hire shops Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes proper operation, serv- icing and repairs as specified by the manufac- turer. See operating instructions. Transport
1. Before transporting the dirt tank, close all the
2. Do nottilt the cleaner if there is liquid in the
3. Do not use a crane hook to lift the cleaner.
1. Store the appliance in a dry place, protected
from frost. Electrical connection
1. Itis recommended that the vacuum cleaner
should be connected via a residual current circuit breaker.
2. Arrange the electrical parts (sockets, plugs
and couplings) and lay down the extension lead so that the protection class is main- tained.
3. Connectors and couplings of power supply
cords and extension leads must be water- tight. Extension lead
1. As an extension lead, only use the version
specified by the manufacturer or one of a higher quality. See operating instructions.
2. When using an extension lead, check the
minimum cross-sections of the cable:
ATTIX 9 STD Cable length Cross section <16A <25A up to 20 m 1.5 mm? 2.5 mm° 20 to 50 m 2.5 mm? 4.0 mm? Guarantee Our general conditions of business are applica- ble with regard to the guarantee. Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage. Tests and approvals Electrical tests must be performed in accord- ance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701 Part 1 and Part
83. In accordance with DIN VDE 0702 these tests
must be performed at regular intervals and after repairs or modifications. Risks Electrical components ÂÀ\ Electric shock due to faulty mains connecting lead. Touching a faulty mains connecting lead can result in serious or even fatal injuries.
1. Do not damage the mains power
lead (e.g. by driving over it, pull- ing or crushing it).
2. Regularly check whether the
power cord is damaged or shows signs of ageing.
3. Have the faulty mains connecting
lead replaced by your Nilfisk-Alto service representative or a quali- fied electrician prior to using the appliance again. Ne = The upper section of the vacuum cleaner contains live components. Contact with live components leads to serious or even fatal injuries.
1. Never spray water on to the
upper section of the vacuum cleaner. Appliance socket ? The appliance socket is only de- signed for the purposes defined in the operating instructions.
1. The connection of different appli-
ances can result in damage.
2. Prior to plugging in an appliance,
always switch off the vacuum cleaner and the appliance that is to be connected.
3. Read the operating instructions
to the appliance to be connected and observe the safety notes contained in these.
Damage due to unsuitable mains voltage. The appliance can be damaged as a result of being connected to an unsuitable mains voltage.
1. Ensure that the voltage shown
on the rating plate corresponds to the voltage of the local mains power supply. Picking up liquids ÂÀ Picking up liquids. Due to their construction vacuum cleaners with a removable tank (SD) do not have an automatic level indi- cator. There is a risk of damage to the vacuum cleaner due to overiilling or of damage due to leakage of the picked up liquid.
1. Never pick up more than 40 litres
2. Switch off the vacuum cleaner
and empty the dirt tank.
Hazardous materials À Hazardous materials. Vacuuming up hazardous materi- als can lead to serious or even fatal injuries
1. The following materials must
not be picked up by the vacuum cleaner: - hazardous dust - hot materials (burning ciga- rettes, hot ash, etc.) - flammable, explosive, ag- gressive liquids (e.g. petrol, solvents, acids, alkalis, etc.) - flammable, explosive dust (e.g. magnesium or alumini- um dust, etc.) Spare parts and accessories ÂA Spare parts and accessories. The use of non-genuine spare parts and accessories can impair the safety of the appliance.
1. Only use spare parts and acces-
sories from Nilfisk-Alto.
2. Use only the brushes supplied
with the vacuum cleaner or speci- fied in the operating manual. Emptying dirt tank À Picking up environmentally hazard- ous materials. Materials picked up can present a hazard to the environment.
1. Dispose of the dirt in accordance
With legal regulations. Recycling the cleaner Make the old cleaner unusable immediately.
1. Unplug the cleaner.
2. Cutthe power cord.
3. Do not discard of electrical appliances with
household waste. As specified in European Directive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information. Quick reference guide Pages 2 — 9 feature a pictorial quick reference guide, which is designed to help you when start- ing up, operating and storing the appliance. This quick reference guide does not replace the separate operating instructions, which describes the appliance in detail. The operating instructions also contain further information on the operation, maintenance and repair of the appliance.
Meaning of the symbols The instructions for actions are subdivided into 4 sections, which are represented by symbols. A Before starting B Control / Operation B Connecting electrical AZ appliances C After finishing work An asterisk (*) indicates a model variant or special accessories. Check whether your appliance is equipped with the control elements or special accessories de- picted. If not, please proceed to the next action.
1. Pass pä at spenningen angitt
UCTONHEHUE, YKA3AHHOE U3TOTOBUTENEM UNI
1. HuB koem cnyuae He BCACHIBATE
EMKOCTB ANA MyYCOPa.
2. ERR#OËR (BEV TVR TS
= FTRANIS HRREMEAES RME A
T HJÆ Hi] 2002/96/EG RATE, D
AISOÏ CHSt SSH He 91 Su Sd HSE 7H Qt AZ CE LICE.
AFBXHO] 71A7+ HAJE SHAOE 224
CÉTHEP NT PE NE ATEN
EC conformity declaration
Description: 110/230-240 V-, 50/60 Hz The design of the machine complies with the following regulations: EC Machine Directive 98/37/EC EC Low Voltage Directive 73/23/EC EC EMC Directive 89/336/EC Harmonized standards:
ManualGo.com