Q: How to configure and change the driving modes on the Xiaomi Electric Scooter 6 Max?

The Xiaomi Electric Scooter 6 Max has three driving modes , configurable via the Xiaomi Home app: Pedestrian Mode (P): Speed limited to 6 km/h, with rear light automatically activated. Reserved for pedestrian areas or restricted spaces. Standard Mode (D): Maximum speed of 15 km/h, ideal for daily urban traffic. Sport Mode (S): Maximum speed of 25 km/h, recommended once you are well-versed in riding. How to change modes: The modes are configured via the Xiaomi Home mobile app. You can also modify the starting speed (3, 4, or 5 km/h) directly in the app. The active mode is displayed on the scooter's control panel.

Q: Where is the function button on the Wireless Mouse 3?

The function button is located on the top of the mouse , easily accessible to the touch. This button allows you to: Short press - Switch between the three available connection channels (1 2.4 GHz channel and 2 Bluetooth channels) Long press (minimum 3 seconds) - Activate Bluetooth pairing mode to connect the mouse to a new device You will also find other important control elements on the mouse: the power button on the bottom , and the battery compartment (which slides down) containing a 1.5V AA battery.

Q: Which charger should I use for the Xiaomi Electric Shaver S101?

For your Xiaomi S101 electric shaver, you must exclusively use the original adapter provided with the device . Charger Specifications Model: A520-050100U-EU1 Connector: Type-C Input: 100-240 V~, 50/60 Hz Output: 5.0 V = 1.0 A (5 W) Charging Time: Approximately 90 minutes Usage Conditions Charge your S101 in a temperature range of 5 °C to 35 °C . Ensure that the charging port remains dry and avoid humid environments during charging. Good to know: You can use your shaver while it is charging. A full charge provides approximately 60 minutes of usage time. If you have lost the original adapter, we recommend ordering it from an official Xiaomi retailer to ensure compatibility and safety for your device.

Q: How can I recover my Xiaomi Redmi 9AT after it fell into water?

Bad news: The Xiaomi Redmi 9AT has no water resistance certification. According to the manual, you should keep the device dry and avoid using it in places with high humidity like a bathroom. If your phone fell into water and turned off, here are the steps to maximize your chances of recovery: Do not turn it on - turning on a wet device risks creating a short circuit and causing permanent damage to the electronic board. Remove what can be removed - Although the 5000 mAh Lithium-ion battery of your Redmi 9AT is built-in (non-removable according to the manual), at least remove the SIM card immediately. Dry the exterior - Use a soft, dry cloth to wipe the surface (do not use chemicals, as stated in the manual). Let it dry for 48-72 hours - Place the device in a warm, dry place. You can use silica gel or uncooked rice to absorb residual moisture. Attempt to power it on - After the waiting period, try to turn it on. If the electronic board has not been damaged, the phone should work. Your documents: If you had synced your documents to Google Drive, OneDrive, or another cloud service, they are safe and recoverable even if the phone does not restart. If the files were only saved locally on the phone, their recovery will depend on the success of the hardware repair.

Question 1

Why does the pairing of my Wireless Mouse 3 disconnect regularly on Mac?

Accepted Answer

If your Wireless Mouse 3 regularly loses connection on Mac, here are some proven solutions:

Basic Checks

Battery: Insert a new 1.5V AA battery. A weak battery causes frequent disconnections. Note: the orange/red light blinks if the battery is low.
Distance: Keep the mouse within 10 meters of the Mac. Obstacles and excessive distance can cause connection loss.
Interference: Other wireless devices (Wi-Fi router, phone, etc.) can disrupt the 2.4 GHz connection.

Changing Connection Channel

The Wireless Mouse 3 has three available channels. If you are using Bluetooth, try the 2.4 GHz mode with the provided USB receiver, which is often more stable on Mac:

Press the Function button (in the center) to switch between channels: Bluetooth 1, Bluetooth 2, or 2.4 GHz.
Hold the Function button for more than 3 seconds until the white light blinks rapidly. This is pairing mode.
Select "Mi Mouse3C" in the Bluetooth settings of the Mac or simply insert the USB receiver for automatic pairing in 2.4 GHz.

Complete Re-pairing

If the problem persists, completely forget the mouse and re-pair it:

Go to System Preferences > Bluetooth on the Mac.
Select "Mi Mouse3C" and click Forget.
Hold the Function button on the mouse for 3+ seconds until you see the white light blink rapidly.
Wait for "Mi Mouse3C" to reappear in the list of available devices, then select it.

Prefer the 2.4 GHz mode if you have the USB receiver: it is generally more stable and reliable on Mac than Bluetooth alone.

Question 2

How to set up and sync the Xiaomi Redmi Watch 2 Lite?

Accepted Answer

To set up your Xiaomi Redmi Watch 2 Lite, you first need to turn it on and then pair it with your smartphone via the official app. Here is the detailed procedure:

Activating the watch

Press and hold the function button (located on the side of the watch) to turn on the device. A QR code will appear on the screen.

Installation and pairing

Scan the displayed QR code with your smartphone
Download the Xiaomi Wear app (Android) or Xiaomi Wear Lite app (iOS)
Log in to your Xiaomi account in the app
When a matching pairing code appears on both the watch and the phone, press Pair to finalize the Bluetooth connection

Automatic time synchronization

Once the pairing is successful, the time and date will sync automatically from your smartphone to the watch. No manual adjustment is necessary.

Question 3

How to configure and change the driving modes on the Xiaomi Electric Scooter 6 Max?

Accepted Answer

The Xiaomi Electric Scooter 6 Max has three driving modes, configurable via the Xiaomi Home app:

Pedestrian Mode (P): Speed limited to 6 km/h, with rear light automatically activated. Reserved for pedestrian areas or restricted spaces.
Standard Mode (D): Maximum speed of 15 km/h, ideal for daily urban traffic.
Sport Mode (S): Maximum speed of 25 km/h, recommended once you are well-versed in riding.

How to change modes: The modes are configured via the Xiaomi Home mobile app. You can also modify the starting speed (3, 4, or 5 km/h) directly in the app. The active mode is displayed on the scooter's control panel.

Question 4

How to manually lock the Xiaomi Electric Scooter 6 Max?

Accepted Answer

The Xiaomi Electric Scooter 6 Max does not have a mechanical locking system integrated into the handlebar or frame. The locking of the scooter is mainly done through the app and physical securing:

Electronic locking via the Xiaomi Home app

Before each use, you must unlock the scooter via the Xiaomi Home app
When powered off, the scooter locks electronically and cannot be used without authorization from the app
You can also track the location of your scooter thanks to the Apple Find My integration if you are using an Apple device

Securing when parking

For outdoor parking, secure the rear tire of the scooter with a padlock to prevent theft or any unintended movement
Additionally, store your scooter in a secure location (indoors, garage) to maximize protection

Conclusion: Combine electronic locking via the Xiaomi Home app with a padlock on the rear wheel for optimal security.

Question 5

How to send an SMS on the Xiaomi Redmi 10C?

Accepted Answer

The Xiaomi Redmi 10C, equipped with two 4G nano-SIM slots, allows you to easily send SMS via the messaging app integrated into the MIUI system (based on Android).

Steps to send an SMS:

Open the Messages app (usually available in the main menu)
Press the (+) button or “New message”
Enter the phone number of the recipient or select a contact from your directory
Write your text in the input field
Press “Send” (arrow icon or validate button)

Important point: The Redmi 10C has a Dual SIM function (two nano-SIM slots). Therefore, you can have two active numbers on the device. If you have two SIM cards, the phone will ask you to choose the SIM card through which to send the message before validating it.

Make sure that your SIM card(s) have credit or an active SMS plan according to your telecom operator.

Question 6

Why does my Redmi Note 11S turn off and on by itself?

Accepted Answer

The involuntary restarts of the Redmi Note 11S can have several causes. Here’s how to diagnose and resolve the issue:

Initial steps to try

Force a complete shutdown: Press and hold the power button for about 10 seconds until the phone completely turns off.
Charge the battery: Connect your device to the original charger (33W via USB-C) and let it charge for at least 30 minutes. A phone with a severely depleted battery may restart unpredictably.
Use the original Xiaomi charger: Unauthorized chargers can cause power issues and restarts.

If the problem persists

Check for updates: Go to Settings > About phone > System update. MIUI updates can fix this type of malfunction. Important: update only through this official method.
Be mindful of temperature: The Redmi Note 11S operates optimally between 0 and 40°C. Overheating can trigger automatic restarts.
Contact Xiaomi support: If the problem persists after these steps, it may be a hardware malfunction. The 5000 mAh battery of your Redmi Note 11S is non-removable and may require professional inspection.

Question 7

Where is the function button on the Wireless Mouse 3?

Accepted Answer

The function button is located on the top of the mouse, easily accessible to the touch.

This button allows you to:

Short press - Switch between the three available connection channels (1 2.4 GHz channel and 2 Bluetooth channels)
Long press (minimum 3 seconds) - Activate Bluetooth pairing mode to connect the mouse to a new device

You will also find other important control elements on the mouse: the power button on the bottom, and the battery compartment (which slides down) containing a 1.5V AA battery.

Question 8

My Bluetooth mouse disappears after being removed - how to re-pair it and why is it not detected?

Accepted Answer

If your Xiaomi Wireless Mouse 3 has been removed and no longer appears in the available Bluetooth devices, here’s how to re-pair it correctly:

Steps to re-pair the mouse

1. Switch to Bluetooth pairing mode

Press and hold the function button for more than 3 seconds
The indicator light for the relevant channel should blink rapidly - this indicates that the mouse is in pairing mode

2. Add the mouse to your computer

On Windows: Go to Bluetooth settings, click on "Add a Bluetooth device", then select "Mi Mouse3C" from the list and confirm the connection
On macOS: Open System Preferences, go to Bluetooth, look for "MI Mouse3C" and click Connect

If the mouse is still not found

Before trying again, check these points:

The mouse is turned on and the power switch is in the ON position
The batteries or the mouse's rechargeable battery are sufficiently charged
You have pressed the function button for more than 3 seconds (the indicator should blink rapidly)
You are close to the computer and away from other wireless devices that could cause interference
Try restarting your computer's Bluetooth after putting the mouse in pairing mode

Once these checks are done, restart the pairing by holding the function button for more than 3 seconds and start adding the device again.

Question 9

Which charger should I use for the Xiaomi Electric Shaver S101?

Accepted Answer

For your Xiaomi S101 electric shaver, you must exclusively use the original adapter provided with the device.

Charger Specifications

Model: A520-050100U-EU1
Connector: Type-C
Input: 100-240 V~, 50/60 Hz
Output: 5.0 V = 1.0 A (5 W)
Charging Time: Approximately 90 minutes

Usage Conditions

Charge your S101 in a temperature range of 5 °C to 35 °C. Ensure that the charging port remains dry and avoid humid environments during charging.

Good to know: You can use your shaver while it is charging. A full charge provides approximately 60 minutes of usage time.

If you have lost the original adapter, we recommend ordering it from an official Xiaomi retailer to ensure compatibility and safety for your device.

Question 10

How can I recover my Xiaomi Redmi 9AT after it fell into water?

Accepted Answer

Bad news: The Xiaomi Redmi 9AT has no water resistance certification. According to the manual, you should keep the device dry and avoid using it in places with high humidity like a bathroom.

If your phone fell into water and turned off, here are the steps to maximize your chances of recovery:

Do not turn it on - turning on a wet device risks creating a short circuit and causing permanent damage to the electronic board.
Remove what can be removed - Although the 5000 mAh Lithium-ion battery of your Redmi 9AT is built-in (non-removable according to the manual), at least remove the SIM card immediately.
Dry the exterior - Use a soft, dry cloth to wipe the surface (do not use chemicals, as stated in the manual).
Let it dry for 48-72 hours - Place the device in a warm, dry place. You can use silica gel or uncooked rice to absorb residual moisture.
Attempt to power it on - After the waiting period, try to turn it on. If the electronic board has not been damaged, the phone should work.

Your documents: If you had synced your documents to Google Drive, OneDrive, or another cloud service, they are safe and recoverable even if the phone does not restart. If the files were only saved locally on the phone, their recovery will depend on the success of the hardware repair.

User manual Xiaomi : user manuals and guides in PDF

Models Xiaomi most viewed

Browse manuals Xiaomi by appliance type

Recent questions about devices Xiaomi