User manual Xiaomi Surveillance Camera : 13 free PDF user manuals

Q: What should I do if the barcode or serial number of my Xiaomi Outdoor Camera AW200 is lost or damaged, and how to repair the speaker?

Lost barcode or serial number If the barcode or serial number of your Xiaomi Outdoor Camera AW200 is lost, damaged, or unreadable, it may affect your warranty coverage. According to Xiaomi's terms, a warranty may be voided if the serial number or warranty label is removed, erased, or damaged. However, contact Xiaomi customer service directly with your proof of purchase (receipt or invoice) - they can often verify your purchase by other means (order number, email address, etc.). Damaged speaker The Xiaomi Outdoor Camera AW200 is equipped with a speaker for audio notifications. If the speaker is not functioning properly, you have several options: Check the settings: Make sure that the audio volume is not disabled in the Xiaomi Home mobile app. Restart the camera: Turn the camera off and on again via the app, then test again. Contact Xiaomi: If the speaker remains silent, contact Xiaomi support with your serial number (even if incomplete) and your proof of purchase. They will offer you a repair or replacement.

Q: How to configure recording and manage storage on the SD card of the Xiaomi CW400

The Xiaomi CW400 camera does not have a configurable recording duration setting as such. Instead, it offers intelligent storage management based on the capacity of your microSD card. MicroSD Storage Configuration The camera supports microSD cards up to 256 GB in FAT32 format . For optimal performance, use a Class 10 minimum card (Class 10 or U1). Before inserting or removing the card, turn off the camera . Open the waterproof cover above the microSD port, insert the card with the contacts facing down , and then close the cover to maintain waterproofing. Management via the Xiaomi Home app To format or manage your card, go to Settings > Manage Storage in the camera's extension module (useful if the card is not natively FAT32). Important: The recording duration mainly depends on the capacity of your microSD card and the video bitrate (2K H.265 compressed). With a 128-256 GB card, you can enjoy several days of retention. Resetting the camera does not delete stored data, so you can reset without risk of loss.

Q: How do I unpair my Xiaomi CW300 camera?

Unpairing your Xiaomi Outdoor Camera CW300 means disconnecting it from your Xiaomi Home account. This operation is necessary if you change your Wi-Fi network, if you want to use the camera on another Xiaomi account, or if you are preparing to sell or transfer it. Unpairing procedure: Locate the reset button located on the back of the camera (Fig. B, position 8) Press and hold this button for 7 seconds You will hear a voice notification confirming the reset and unpairing The camera indicator will light up orange, signaling that it is waiting for a new connection After unpairing: The data stored on your microSD card will not be deleted The camera settings are reset The camera can then be paired with a new Xiaomi Home account To reconnect your camera, open the Xiaomi Home app, tap the “+” button at the top right, and follow the pairing instructions by scanning the QR code or manually entering the camera information. Make sure the indicator remains orange and that your Wi-Fi network is stable during reconnection. Once paired, the indicator will turn blue.