Mi Cordless Screwdriver - Cordless screwdriver Xiaomi - Free user manual and instructions
Find the device manual for free Mi Cordless Screwdriver Xiaomi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric cordless screwdriver |
| Brand | Xiaomi |
| Model | Mi Cordless Screwdriver |
| Main use | Screwing and unscrewing screws |
| Power source | Rechargeable 3.6V lithium-ion battery |
| Battery capacity | 1500 mAh |
| Charging time | 2 to 3 hours |
| Charging | USB-C port |
| Rotation speed | 200 rpm |
| Maximum torque | 5 Nm |
| Direction of rotation | Reversible (clockwise / counterclockwise) |
| Chuck | Magnetic bit holder 6.35 mm (1/4") |
| Included bits | 24 bits in S2 steel |
| Light | Integrated LED |
| Motor | Direct current electric motor |
| Material | ABS plastic with non-slip coating |
| Dimensions | 190 × 32 mm (L × Ø) |
| Weight | 350 g |
| Safety | Protection against overloads and overheating |
| Maintenance | Clean with a dry cloth |
| Spare parts | Replacement bits and USB cable |
Frequently Asked Questions - Mi Cordless Screwdriver Xiaomi
How to recharge the Xiaomi Mi Cordless Screwdriver?
Use the supplied USB cable, plug it into a power adapter or USB port. The LED indicator shows the charging status. Charging time is about 2 to 3 hours.
What is the battery life?
The 1500 mAh lithium-ion battery can drive about a hundred screws depending on usage conditions. With intermittent use, the battery life is approximately 2 to 4 hours.
Which bits are included?
The kit includes 24 S2 steel screwdriver bits with common sizes (Phillips, slotted, Torx, etc.), stored in a case.
How to change the bits?
Pull out the old bit, then insert the new one into the magnetic hexagonal bit holder until it clicks into place.
Does the screwdriver have an LED light?
Yes, an LED located near the chuck turns on automatically to illuminate the work area.
How to reverse the rotation direction?
Use the slider or control button to switch from clockwise to counterclockwise rotation.
Can I use bits from different brands?
Yes, the standard 6.35 mm (1/4 inch) bit holder accepts universal bits.
What to do if the screwdriver stops working?
Check the battery level and plug it into a power source. If the problem persists, contact Xiaomi support.
How to clean the screwdriver?
Wipe the outside with a clean, dry cloth. Never immerse in water or use solvents.
Is the chuck magnetic?
Yes, the bit holder is magnetic to hold screws in place, making screwing easier.
User questions about Mi Cordless Screwdriver Xiaomi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cordless screwdriver in PDF format for free! Find your manual Mi Cordless Screwdriver - Xiaomi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mi Cordless Screwdriver by Xiaomi.
USER MANUAL Mi Cordless Screwdriver Xiaomi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xiaomi
Model : Mi Cordless Screwdriver
Category : Cordless screwdriver