How to attach the D-handle to the METABO KHE 2860 Quick drill?

Question

Accepted Answer

To attach the additional handle (D-handle) to your METABO KHE 2860 Quick drill, follow the steps in the manual:

Step 1: Open the clamping ring - Turn the additional handle to the left to open the clamping ring that holds the handle on the machine collar.

Step 2: Position the handle - Slide the additional handle onto the machine collar while keeping it at the desired angle for your comfort and control.

Step 3: Install the depth stop - Insert the depth stop (8) into the designated slot on the handle. This stop allows you to set the exact drilling depth according to your needs.

Step 4: Tighten the handle - Firmly tighten the additional handle at the desired angle based on the intended use. Depending on the type of work (drilling, chiseling), you can adjust the angle for optimal grip.

Using this additional handle correctly is essential for your safety: it ensures better control of the tool, especially during a jam or an unexpected change in direction. Check before each use that the handle is securely tightened and stable.

User manual METABO Drill : user manuals and guides in PDF

Models METABO Drill most viewed

Other categories METABO

Recent questions about Drill METABO