METABO KHA 36 LTX - Drill

KHA 36 LTX - Drill METABO - Free user manual and instructions

Find the device manual for free KHA 36 LTX METABO in PDF.

📄 76 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice METABO KHA 36 LTX - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Cordless drill/driver
Brand Metabo
Model KHA 36 LTX
Voltage 36 V
Battery type Li-Ion (compatible with Metabo 36V series)
Chuck Keyless automatic
Drilling capacity (steel) 13 mm
Drilling capacity (wood) 40 mm
No-load speed (1st gear) 0 – 550 rpm
No-load speed (2nd gear) 0 – 2000 rpm
Max torque 60 Nm
Weight (with battery) 2.1 kg
Dimensions (L x W x H) 250 x 80 x 250 mm
Power supply Rechargeable battery 36 V
Main functions Drilling, screwdriving, hammer drilling
Maintenance and cleaning Clean ventilation slots with a dry brush
Safety Motor brake, spindle lock, variable speed
Spare parts and repairability Available through Metabo service
General information 3-year warranty, made in Germany

Frequently Asked Questions - KHA 36 LTX METABO

How to change the chuck?
To change the chuck, loosen the chuck fixing screw using a Phillips screwdriver. Unscrew the chuck counterclockwise. Place the new chuck and tighten the screw. Refer to the manual for compatibilities.
Which battery to use?
Use exclusively Metabo Li-Ion batteries from the 36V series, such as LiHD or Li-Power models. Do not use batteries from other brands.
How to adjust the torque?
Turn the torque adjustment ring located behind the chuck. The numbers indicate the torque level (1=low, 20=high). For drilling, use the drill symbol (max position).
Why does the drill stop?
Several possible causes: discharged battery, overheating (wait for cooling), motor stall. Also check that the anti-restart safety is not activated after a power outage.
How to use the hammer function?
For drilling in concrete or brick, set the mode selector to the hammer symbol (hammer). For wood or metal, return to normal drilling mode (drill only).
How to clean the drill?
Disconnect the battery. Clean the housing with a damp cloth (no solvents). Blow out the ventilation slots with dry compressed air to remove dust. Do not immerse in water.
What to do if the battery does not charge?
Check that the charger is properly plugged in and the contacts are clean. Try another battery to test the charger. If the problem persists, the battery may be defective; contact Metabo service.
How to replace the brushes?
The brushes are accessible through the motor side caps. Unscrew them, remove the old brushes and insert the new ones following the direction. Use genuine Metabo brushes to ensure safety and performance.
What is the warranty?
The legal warranty is 2 years. Metabo offers a warranty extension to 3 years if the device is registered on metabo.com within 4 weeks of purchase.
Where to find spare parts?
Spare parts are available from authorized Metabo dealers or on the official website. Use the model number KHA 36 LTX to identify the part.

User questions about KHA 36 LTX METABO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Drill in PDF format for free! Find your manual KHA 36 LTX - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KHA 36 LTX by METABO.

USER MANUAL KHA 36 LTX METABO

natural_image Two Metabo brand thermocouple units (no visible text or symbols on the devices themselves)

METABO KHA 36 LTX - 1

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that these chargers, identified by type and serial number *1), meet the requirements of all relevant directives *2) and standards *3). Technical documents for *4) - see page 3.

For UK only:

UK We as manufacturer and authorized person to CA compile the technical file, see *4) on page 3, hereby declare under sole responsibility that these chargers, identified by type and serial number *1) on page 3, fulfill all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2016/1101, S.I. 2012/3032 and Designated Standards EN 60335-1, EN 60335-2-29, EN IEC 63000:2018.

2. Specified Conditions of Use

Chargers are only suitable for charging Metabo and CAS (Cordless Alliance System) battery packs.

This device is not designed for use by persons (including children) with physical, sensory or mental disabilities, or with insufficient experience and/or knowledge, unless they are supervised by a person responsible for their safety, or have received instructions on how to use the device by this person.

ASC 30-36 is suitable for charging Li-ion battery packs (14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells).

ASC 55, ASC 55 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 145, ASC 145 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC ultra is suitable for charging Li-ion battery packs (corresponding to the print on the tool, either 14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells, or 12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

SC 60 Plus is suitable for charging Li-ion battery packs (14.4 V - 18 V, 1.3 Ah - 10 Ah, 4-10 cells).

SC 30 is suitable for charging Li-ion battery packs (12 V - 18 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 55, ASC 55 SE is suited for charging NiCd battery packs (12 V, 1.7 Ah, 10 cells).

METABO KHA 36 LTX - Specified Conditions of Use - 1

Never attempt to charge batteries that are not rechargeable. Danger of explosion!

The user bears sole responsibility for any damage caused by inappropriate use.

Generally accepted accident-prevention regulations and accompanying safety instructions should be observed.

3. General Safety Information

METABO KHA 36 LTX - General Safety Information - 1

WARNING – Read the operating instructions to reduce the risk of injury.

METABO KHA 36 LTX - General Safety Information - 2

WARNING Read all safety warnings and instructions.

Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference.

METABO KHA 36 LTX - Keep all safety instructions and information for future reference. - 1

Before using the charger, carefully read through and familiarise yourself with all closed safety information e Operating Instructions.

Keep all enclosed documentation for future reference, and pass on your charger only together with this documentation.

4. Special Safety Instructions

METABO KHA 36 LTX - Special Safety Instructions - 1

For your own protection and for the protection of your power tool, pay attention to its of the text that are marked is symbol!

METABO KHA 36 LTX - Special Safety Instructions - 2

Danger - electrical voltage!

METABO KHA 36 LTX - Special Safety Instructions - 3

A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!

If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!

ENGLISHen

Do not recharge a fully charged battery pack!

METABO KHA 36 LTX - ENGLISHen - 1

Only for use in indoor rooms.

METABO KHA 36 LTX - ENGLISHen - 2

Protect the charger from moisture.

Never allow children to use the device.

Children should be supervised to ensure that they do not play with the tool.

Keep children away from the battery charger and the working area!

Keep your battery charger out of reach of children!

Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge!

Do not insert objects into the ventilation slots on the battery charger – there is a danger of electric shocks and short circuits!

Do not use faulty battery packs. In areas with high metal dust exposure do not charge any battery packs with AIR COOLED chargers.

5. Overview

See page 2. The illustrations are regarded as exemplary for all devices.

1 Battery pack (not in scope of delivery)
2 Sliding seat
3 Operation display
4 Warning display

6. Initial Operation

METABO KHA 36 LTX - Initial Operation - 1

Before commissioning, check that the rated mains voltage and mains frequency stated on the type plate match your power supply.

Devices like these that generate direct current can influence simple earth leakage protection devices. Use a type F or better, with a release current of max. 30 mA.

METABO KHA 36 LTX - Initial Operation - 2

Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm!

6.1 Self-test

Plug in.

The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds.

7. Use

7.1 Charging battery pack

Push the battery pack completely to the stop on the sliding seat (2).

METABO KHA 36 LTX - Charging battery pack - 1

The operating indicator (3) flashes.

Note: To have the charge level displayed on Li-ion battery packs, first take the battery pack out of the charger and then press the button on the battery pack.

7.2 Conservation charge

Once the charging process has finished, the battery charger automatically switches to conservation mode.

The battery pack can remain in the battery charger and is therefore always ready for use.

METABO KHA 36 LTX - Conservation charge - 1

The operating display (3) lights up continuously.

8. Faults

8.1 Warning display (4) lights up continuously

METABO KHA 36 LTX - Warning display (4) lights up continuously - 1

Battery pack is not charged. Excessive/insufficient temperature. When the temperature of the battery pack is between 0 °C and 50 °C, the charging process begins automatically.

8.2 Warning display (4) flashes

METABO KHA 36 LTX - Warning display (4) flashes - 1

  • Battery pack is defective. Remove the battery pack immediately from the charger.
  • The battery pack was not pushed correctly onto the sliding seat (2). See chapter 7.1.

9. Repairs

Repairs to the charger must only be carried out by qualified electricians.

If the mains connection cable of this device is damaged, it must be replaced by the manufacturer

or the Customer Service department of the manufacturer or a similarly qualified person to prevent endangering personnel and property.

If you have Metabo charges that require repairs, please contact your Metabo service centre. See www.metabo.com for addresses.

10. Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.

METABO KHA 36 LTX - Environmental Protection - 1

Only for EU countries: never dispose of power tools in your household waste! According to European Directive 2012/19/EU

on Waste from Electric and Electronic Equipment and implementation in national law, used power tools must be collected separately and recycled in an environmentally-friendly manner.

11. Technical Specifications

See page 3.

U = voltage ranges of the battery packs
C = battery pack capacity
lC = charging current
t = charging time

1) Depending on the residual capacity and the temperature of the battery pack, real charging times may deviate from the specifications.

Recommended ambient temperature when charging: 0 °C to 40 °C

Changes due to technological progress reserved.

Device of protection class II

\~ AC Power

FRANÇAISfr

Notice originale

C = accupack-capaciteit

IC = laadstroom

t = laadtijd

Uju wtuwlyh wupftpp, npn6f qt6tpwg6mio t6 hwnwnwnm6 hwnw6f, lwpnn t6 mqn1L yhi6ptpt6ghwL mwqwhnljs wfswnhty6lph dpu: Yhpwnld F wkwnlp, lqud wnwnlljwqnj6ip 30 d1U, wfswnndwl hwnwlfnl wejwnwnn daqtkp:

METABO KHA 36 LTX - Notice originale - 1

1 npdwnphnufgh wwng hwnqyltf, np onwnphnufng mfgftp# pgmfumd st6: Nmhqnukl wnfu[mq6 5 nd hlwni]npnupjni6 wjl wnwnphwukph ghwundwdp:

6.1 Ummiqnli

hynngwlq shmgfkl hnuw6f h ympnwlqhi:

UqqnW6cmW6Jh6 (4) h wcjwnwnGfH h6nhlhwwnpGtph lmjutpp (3) ymnjnu6 t6 hwgnpnpwp nwnmlpnwmtu 1 yph. empuftmuh, gtpumpfylmd hnflmgfdh hndwlpmpqp mcjwnmmuf k dum. 5 yph. empuftmuh:

7. Чршннід

C = Uwpunlqngh hqnpncpjnufp

IC = lhglw|npduwhnuwlf

t = 1,hgfu|npduw|duufulw|

1) qubqud hghduwupuuhg le yapuwumfuuhq wujuwukphg hghwunpufu hpulwui duwuwuhp lwpqn k wnppptpkl fclud duwuwuhwhwniuwditphg:

Ighfuwapufu duwufuw ouunfuw ykpudwnuhfuircC hg uhyu 40 ircC:

Bcpwqk k ywnpduw6 wkjgghwqng pwpkluwduw6 Guwwwnqnl:

□ II ηωυρ υωσωωω6m pγm6

\~ Φnμnμmμg hnuugf

№ ЕАЭС RU C-DE.ГБ09.B.00131/20, qnpδnul t, uhωδ 10.02.2020 άh624 09.02.2025 pp., mpjbl t, «'Ukqwllhuftwjuw έfwnlρωnhqu» UΩC' wpnnwnpwufh hw|wwnnwwqpwuf δwpd6h hqn6hg, hwugl (hpwnlwpwfuwr l qnpδnflklnpjw6) ' 115280, θnclwwnnw, fwunuf U'nuljlu, φnngg Ιθhghuhwjuw U1pnnnu, ct6f 19, 2-pn hwph, ut6jmw6tp ' 21w8, 21w9, 21w10, 21w11: Ztnwnpu ' +7 (495) 722-61-68; ηL. φnwnuh hwugt' info@n-exp.ru: Zwi|wwnnwwqpwuf ίhwjwqhp No POCC RU.0001.11ГБ09 wn 09.09.2014 p.:

Zwduuununluwufprjwh hwnunupwquhp ' No EA3C N RU Д-DE.ГБ09.B.00348/20, qnpdnif k uluwd 04.03.2020 üh6h 26.02.2025 pp., qpwfgylt k «Ükqwlluhwjw fwntpwnhqw» UФ' wpmwnpw6f hwnwnwnqpw6 dmp6h hnp6h, hmugt (hpwnlpw6mhw6 h qnpdnftm pwr6h)' 115280, fncuunnuw6, fuqw f Unalhu, qhnng l,ghfuhwjw Ulnpnnw, ct6f 19, 2-pn hwph, utgjwl6tp '21w8, 21w9, 21w10, 21w11: Zbwnlwnn' +7 (495) 722-61-68; ξL. qwnuh hmugt' info@n-exp.ru: Zwlnwnwnqpw6 g lqmjwqhp No POCC RU.0001.11ГБ09 mm 09.09.2014 p.:

Upumnprufng kphhp' Qfghwnwnfg, qjkwngm Upumnprunq "Metabowerke GmbH", Utkwnpnwnlbjk 1, D-72622 Ujnpuhfiqfg, qkpufmfgm Ukpufmdnq fncnuunnwnfgmud "Utkwnpn bilpuuIm" UfC Pouuunnwnfg, 127273, Unuqlu Φ. ftpjnqnqlwju wltw, umt6 5 a, chg.-6 7, qpwtgjwlq 106 htn.' +7 495 980 78 41

Upwnnpudw wduwpplp gcalmd k Lhgfwlpudw uwpfh qpm Tnpdft h dwnwnmpjw6 dmuhtpw 7 uwpfh k: hnphmprn sh wpfnd wnuhfg hwiofwqm hiuniqdwh oqwnqnptk l qnpdftp wpwnnpudw wduwpllg uhumd '5 mmph cmpnfdmh wjh wpnhctwnmqlaplng hlaan (wpwnnpudw wduwphlp ndu whunwl h ipw):

METABO KHA 36 LTX - Чршннід - 1

Shukhupjuli qianpnh huiup.

ZwduwwuunwulwGnlpjw6 hwylwwwnwqhp.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : METABO

Model : KHA 36 LTX

Category : Drill