DB 3DL2 - Drill METABO - Free user manual and instructions
Find the device manual for free DB 3DL2 METABO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill/driver |
| Brand | Metabo |
| Model | DB 3DL2 |
| Battery voltage | 18 V |
| Battery type | Li-Ion |
| No-load speed (1st gear) | 0 - 400 rpm |
| No-load speed (2nd gear) | 0 - 1400 rpm |
| Max torque | 50 Nm |
| Drilling capacity in wood | 40 mm |
| Drilling capacity in steel | 13 mm |
| Chuck | Keyless, 13 mm |
| Weight | 1.7 kg |
| Dimensions (L x W x H) | 230 x 70 x 210 mm |
| Power supply | 18 V Li-Ion battery |
| Functions | Drilling, screwing, hammer |
| Sound level (LpA) | 78 dB(A) |
| Vibration (metal drilling) | 2.5 m/s² |
| Maintenance | Clean with a dry cloth, occasional lubrication |
| Safety | Motor brake, spindle lock, overload protection |
| Spare parts | Available via Metabo after-sales service |
| Included accessories | 1 battery, 1 charger, 1 case |
| Warranty | 3 years |
Frequently Asked Questions - DB 3DL2 METABO
How to change the chuck of the Metabo DB 3DL2 drill?
To change the chuck, loosen the locking screw located inside the chuck using an Allen key. Remove the chuck by turning counterclockwise. Install the new chuck and tighten the screw.
Which battery is compatible with the DB 3DL2 model?
The DB 3DL2 drill uses 18 V Metabo Li-Ion batteries. Batteries from the Li-Power or LiHD series are recommended for optimal performance.
How to charge the drill battery?
Use the charger provided by Metabo. Plug the charger into a power outlet, insert the battery into the charger. The indicator shows charging. A full charge takes about 30 to 60 minutes depending on the battery model.
What to do if the drill does not start?
Check that the battery is charged and properly inserted. Make sure the rotation direction is not set to neutral. If the problem persists, contact Metabo after-sales service.
How to use the hammer function?
To activate hammer mode, turn the mode selection ring to the hammer symbol. Use hammer mode for drilling into masonry, concrete, or brick. For standard drilling on wood or metal, use normal drilling mode.
What is the maximum torque of the DB 3DL2?
The maximum torque is 50 Nm, allowing you to drive large diameter screws and drill into hard materials.
How to clean and maintain the drill?
Disconnect the battery before any cleaning. Clean the housing with a slightly damp cloth. Do not use harsh solvents. Occasionally lubricate the chuck with a drop of oil.
Does the drill have a motor brake?
Yes, the DB 3DL2 is equipped with a motor brake that quickly stops the chuck after releasing the trigger, improving safety.
What is the maximum drilling capacity in wood?
The maximum drilling capacity in wood is 40 mm with standard wood drill bits. For larger diameters, use suitable hole saws.
Where to find spare parts for the Metabo DB 3DL2?
Spare parts are available from authorized Metabo dealers or directly on the Metabo website. Use the model reference to identify compatible parts.
User questions about DB 3DL2 METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DB 3DL2 - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DB 3DL2 by METABO.
USER MANUAL DB 3DL2 METABO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : METABO
Model : DB 3DL2
Category : Drill