How to recharge the battery of the METABO BSP 12 PLUS drill?

Question

Accepted Answer

Your METABO BSP 12 PLUS drill is equipped with two removable 12 V lithium-ion batteries that are easy to recharge. To remove a battery, press the two release buttons located on either side of the Futuro Plus quick chuck and slide the battery out of the housing. This operation can be done in a few seconds without any tools.

The chargers compatible with the BSP 12 PLUS are the AC 30 Plus and ACS 15 Plus models, equipped with Metabo's patented air cooling technology. Insert the battery into the charger by gently engaging it until you hear a click. Plug the charger into a 230 V/50-60 Hz outlet. A light indicator will turn on to show that charging is in progress.

The charging time depends on the charger model used. With the AC 30 Plus charger, the battery fully charges in about 30 minutes. With the faster ACS 15 Plus model, the battery reaches a full charge in about 15 minutes. These times correspond to a standard 1.4 Ah battery and may vary slightly depending on your battery's capacity.

Metabo's AIR COOLED technology ensures battery cooling during charging, which speeds up the process and extends the lifespan of the cells. Once charging is complete, the charger automatically switches to trickle charge mode to prevent overcharging. You can leave the battery in the charger without the risk of damage.

Reinsert the charged battery into the drill by firmly engaging it until it clicks into place. You now have two batteries: while you use one, the other can charge, ensuring continuous power for your work. Li-ion batteries have no memory effect and can be recharged at any time without loss of performance.

User manual METABO Power tool : user manuals and guides in PDF

Models METABO Power tool most viewed

Other categories METABO

Recent questions about Power tool METABO