BE 18 LTX 6 - Drill METABO - Free user manual and instructions

Product type	Cordless drill/driver
Brand	Metabo
Model	BE 18 LTX 6
Voltage	18 V
Battery type	Li-Ion
Battery capacity	2.0 Ah (standard)
Chuck	Keyless chuck, 13 mm
No-load speed (1st gear)	0 - 600 rpm
No-load speed (2nd gear)	0 - 2000 rpm
Max torque	60 Nm
Drilling capacity wood	Up to 35 mm
Drilling capacity steel	Up to 13 mm
Weight (without battery)	1.5 kg
Dimensions (L x W x H)	200 x 70 x 200 mm
Number of speeds	2
Variable speed	Yes, by trigger
Reversing switch	Yes
Spindle lock	Yes
Motor brake	Yes
Overload protection	Yes
Maintenance and cleaning	Clean the ventilation slots regularly with a dry brush
Spare parts	Battery, charger, chuck, carbon brushes (if equipped)
Repairability	Metabo after-sales service, parts available for 10 years

Frequently Asked Questions - BE 18 LTX 6 METABO

How to change the chuck on the Metabo BE 18 LTX 6 drill?

To change the chuck, use an Allen key to unscrew the locking screw inside the chuck (left-hand thread). Then, turn the chuck counterclockwise to remove it. Install the new chuck by hand-tightening.

What is the battery runtime on the Metabo BE 18 LTX 6?

Runtime depends on battery capacity and usage. With a 2.0 Ah battery, you can drill about 50 holes of 10 mm in wood. For intensive work, choose a 4.0 Ah or higher battery.

How to know if the battery is fully charged?

The Metabo charger indicates the end of charging with a solid green light. Some chargers also emit a sound signal. Consult the charger manual for details.

Can I use hammer drill bits with this model?

No, the Metabo BE 18 LTX 6 is a drill/driver without hammer function. It is designed for drilling in wood, metal and plastic, but not in masonry. Use a hammer drill for concrete.

How to adjust the torque setting?

Turn the torque adjustment ring located behind the chuck. The numbers indicate the torque level. Start with a low setting for delicate screws and increase gradually until the desired tightening is achieved.

What to do if the drill does not start?

First, check that the battery is charged and properly inserted. If the problem persists, ensure the spindle lock is not engaged. Finally, check the carbon brushes (if accessible) and replace them if worn.

How to maintain the Metabo BE 18 LTX 6 drill?

Clean the ventilation slots regularly with a soft brush to prevent overheating. Store the drill in a dry place. Lubricate the chuck occasionally with a drop of oil.

What is the warranty on the Metabo BE 18 LTX 6 drill?

Metabo offers a 2-year warranty from the date of purchase. Online product registration can extend the warranty to 3 years. Keep the invoice as proof of purchase.

Can I use batteries from other brands?

It is not recommended to use non-Metabo batteries as they may not meet safety standards and could damage the tool. Use only Metabo 18V LTX series batteries.

How to change the carbon brushes?

Disconnect the battery. Remove the brush caps (usually located on each side of the motor). Take out the worn brushes and insert the new ones. Replace the caps. Run the drill at no load for a few minutes to break in the brushes.

USER MANUAL BE 18 LTX 6 METABO

Two Metabo brand thermocouple units (no visible text or symbols on the devices themselves)

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that these chargers, identified by type and serial number *1), meet the requirements of all relevant directives *2) and standards *3). Technical documents for *4) - see page 3.

For UK only:

UK We as manufacturer and authorized person to CA compile the technical file, see *4) on page 3, hereby declare under sole responsibility that these chargers, identified by type and serial number *1) on page 3, fulfill all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2016/1101, S.I. 2012/3032 and Designated Standards EN 60335-1, EN 60335-2-29, EN IEC 63000:2018.

2. Specified Conditions of Use

Chargers are only suitable for charging Metabo and CAS (Cordless Alliance System) battery packs.

This device is not designed for use by persons (including children) with physical, sensory or mental disabilities, or with insufficient experience and/or knowledge, unless they are supervised by a person responsible for their safety, or have received instructions on how to use the device by this person.

ASC 30-36 is suitable for charging Li-ion battery packs (14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells).

ASC 55, ASC 55 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 145, ASC 145 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC ultra is suitable for charging Li-ion battery packs (corresponding to the print on the tool, either 14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells, or 12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

SC 60 Plus is suitable for charging Li-ion battery packs (14.4 V - 18 V, 1.3 Ah - 10 Ah, 4-10 cells).

SC 30 is suitable for charging Li-ion battery packs (12 V - 18 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 55, ASC 55 SE is suited for charging NiCd battery packs (12 V, 1.7 Ah, 10 cells).

Never attempt to charge batteries that are not rechargeable. Danger of explosion!

The user bears sole responsibility for any damage caused by inappropriate use.

Generally accepted accident-prevention regulations and accompanying safety instructions should be observed.

3. General Safety Information

WARNING – Read the operating instructions to reduce the risk of injury.

WARNING Read all safety warnings and instructions.

Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference.

Before using the charger, carefully read through and familiarise yourself with all closed safety information e Operating Instructions.

Keep all enclosed documentation for future reference, and pass on your charger only together with this documentation.

4. Special Safety Instructions

For your own protection and for the protection of your power tool, pay attention to its of the text that are marked is symbol!

Danger - electrical voltage!

A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!

If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!

ENGLISHen

Do not recharge a fully charged battery pack!

Only for use in indoor rooms.

Protect the charger from moisture.

Never allow children to use the device.

Children should be supervised to ensure that they do not play with the tool.

Keep children away from the battery charger and the working area!

Keep your battery charger out of reach of children!

Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge!

Do not insert objects into the ventilation slots on the battery charger – there is a danger of electric shocks and short circuits!

Do not use faulty battery packs. In areas with high metal dust exposure do not charge any battery packs with AIR COOLED chargers.

5. Overview

See page 2. The illustrations are regarded as exemplary for all devices.

1 Battery pack (not in scope of delivery)
2 Sliding seat
3 Operation display
4 Warning display

6. Initial Operation

Before commissioning, check that the rated mains voltage and mains frequency stated on the type plate match your power supply.

Devices like these that generate direct current can influence simple earth leakage protection devices. Use a type F or better, with a release current of max. 30 mA.

Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm!

6.1 Self-test

Plug in.

The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds.

7. Use

7.1 Charging battery pack

Push the battery pack completely to the stop on the sliding seat (2).

The operating indicator (3) flashes.

Note: To have the charge level displayed on Li-ion battery packs, first take the battery pack out of the charger and then press the button on the battery pack.

7.2 Conservation charge

Once the charging process has finished, the battery charger automatically switches to conservation mode.

The battery pack can remain in the battery charger and is therefore always ready for use.

The operating display (3) lights up continuously.

8. Faults

8.1 Warning display (4) lights up continuously

Battery pack is not charged. Excessive/insufficient temperature. When the temperature of the battery pack is between 0 °C and 50 °C, the charging process begins automatically.

8.2 Warning display (4) flashes

• Battery pack is defective. Remove the battery pack immediately from the charger.
• The battery pack was not pushed correctly onto the sliding seat (2). See chapter 7.1.

9. Repairs

Repairs to the charger must only be carried out by qualified electricians.

If the mains connection cable of this device is damaged, it must be replaced by the manufacturer

or the Customer Service department of the manufacturer or a similarly qualified person to prevent endangering personnel and property.

If you have Metabo charges that require repairs, please contact your Metabo service centre. See www.metabo.com for addresses.

10. Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.

Only for EU countries: never dispose of power tools in your household waste! According to European Directive 2012/19/EU

on Waste from Electric and Electronic Equipment and implementation in national law, used power tools must be collected separately and recycled in an environmentally-friendly manner.

11. Technical Specifications

See page 3.

U = voltage ranges of the battery packs
C = battery pack capacity
l_C = charging current
t = charging time

¹⁾ Depending on the residual capacity and the temperature of the battery pack, real charging times may deviate from the specifications.

Recommended ambient temperature when charging: 0 °C to 40 °C

Changes due to technological progress reserved.

Device of protection class II

\~ AC Power

FRANÇAISfr

Notice originale

C = accupack-capaciteit

I_C = laadstroom

t = laadtijd

Uju wtuwlyh wupftpp, npn6f qt6tpwg6m1d t6 hwnwnwnm6 hwnw6f, lwpnn t6 mqnltL yhi6ptpt6ghwL mwqwhnl1s ufswnnty5kph dpu: YhpwnlF wkwnlp, lquw wnwljlwqncl6p 30 dJU, wfswnndwl hwnwlfnl wejwnwnn daqtkp:

¹ npdwnphnufgh wwng hwnqyltf, np onwnphnufwgh mfgftpju hgnfujmds st6: Nmhqnukl wnfujmq6 5 nd hlnwnlpapnjuni wjl wnwnphnuklph gllwnndwdp:

6.1 Ummiqnli

hynngwlq shmgfkl hnuw6f h ympnwlqhi:

UqqnW6cmW6Jh6 (4) h wcjwnwnGfH h6nhlhwwnnpGtph lmjutpp (3) ymnjnu6 t6 hwgnpnpwpw dwnwnlpwnwtu 1 yph. empuftmuh, gtpumppfjmd hnlmgfdh hndwlmpqq mcjwnmmuf k dum. 5 yph. empuftmuh:

7. Чршннід