How do I turn on the lighting of my TREK Powerfly 5 Gen 4?

Question

Accepted Answer

The lighting of your TREK Powerfly 5 Gen 4 is controlled via your remote control or remote command. Always check the lighting functionality before each departure.

With the LED Remote (BRC3600): Press the button (9) for more than 1 second to turn the lighting on or off. You can then use buttons (11) and (10) to adjust the brightness of the LEDs to your liking.

With the Mini Remote (BRC3300): Press the button (4) labeled “Increase Assistance/Bike Lighting” for more than 1 second to turn the lighting on or off. This is the same button that increases the assistance level.

With the System Controller (BRC3100): Use the button (4) “Increase Assistance/Bike Lighting” in the same way as the Mini Remote: press for more than 1 second to activate or deactivate the lighting.

To turn off the lighting: Press the same button again to turn off the lights. The brightness of your screen automatically adjusts based on ambient light thanks to a built-in sensor, but you can also adjust it manually using the buttons available on your remote control.

User manual TREK Bike : user manuals and guides in PDF

Models TREK Bike most viewed

Other categories TREK

Recent questions about Bike TREK