How to remove the car seat from the PEG PEREGO Book Plus 51 stroller to install a carrycot?

Question

Accepted Answer

To remove the car seat from your PEG PEREGO Book Plus 51 stroller and install a carrycot, follow these simple steps:

Before you begin: Always engage the stroller brakes before attaching or detaching a module. This ensures stability and safety during the operation.

Removing the car seat:

Make sure the stroller is completely stopped on a flat surface and that the brakes are locked.
Lift the front bar to the transport position (high position).
Locate the release lever of the Ganciomatic system located under the car seat, usually at the top of the backrest.
While holding the front bar, push this lever upwards.
At the same time, gently lift the car seat upwards and pull it slightly towards you to completely release it from the attachment points.
Store the car seat in a safe place.

Installing the carrycot:

Position the carrycot (Navetta) in front of the Ganciomatic attachment points on the chassis, holding it by both sides.
Lower it slowly onto the chassis, aligning it with the metal attachments.
Press down firmly with both hands from top to bottom until you hear a distinct click indicating that the carrycot is securely locked.
Check that the carrycot is firmly attached by attempting to lift it slightly: it should not move.

The Ganciomatic system of your Book Plus 51 is designed to allow quick interchange between multiple modules (Primo Viaggio car seat, Navetta carrycot, evolving seat) according to your child's age and needs. This flexibility makes the Book Plus 51 a complete 3-in-1 stroller from birth up to about 36 months.

User manual PEG PEREGO Stroller : user manuals and guides in PDF

Models PEG PEREGO Stroller most viewed

Other categories PEG PEREGO

Recent questions about Stroller PEG PEREGO