Q: How long does it take to fully charge the BIGBEN Party speaker?

The BIGBEN Party requires approximately 6 to 7 hours for a full charge. To charge the device, simply connect the supplied USB cable to the speaker and plug it into a standard USB power source (computer, 5V power adapter, etc.). The speaker is equipped with a lithium battery of 1200 mAh × 2 and accepts an input of 5V 1A . We recommend using a quality power adapter for optimal and faster charging than a USB connection on a computer.

Q: How to activate Bluetooth mode on the BIGBEN TW7?

Step 1: Make sure the speaker is turned on. If not, press the power button. Step 2: Press the MODE button located on the body of the BIGBEN TW7 several times. The MODE button cycles through the different sources: Bluetooth (BT), FM, USB, SD, and AUX. The LED display should indicate BT to confirm that you are in Bluetooth mode. Step 3: On your phone or device, enable Bluetooth and start searching for available devices. Step 4: Select "TW7" from the list of detected Bluetooth devices. Step 5: If pairing requests a PIN code, enter 0000 . Once paired, your device should automatically reconnect to the TW7 each time Bluetooth is activated, within a range of 10 meters. Tip: If pairing fails, ensure that Bluetooth is enabled on your phone, and that the TW7 does not have another device already connected. You can also try turning the speaker off and on again, then repeat the procedure.

Question 1

Does the battery indicator turn green once charging is complete?

Accepted Answer

The BIGBEN Party manual does not specify the colors or specific behavior of the indicator light during charging.

The manual mentions that the speaker has integrated LEDs that you can turn on or off by pressing and holding the Mode button, but it does not detail whether the charging indicator changes color (notably to green) at the end of the charging process.

What we know according to the manual: the charging cable must be connected to the speaker and then to a USB source, and the full charging time is 6 to 7 hours.

To know the exact operation of the charging indicator (colors and states), we recommend contacting Bigben customer service directly:

Phone: 0969397959 (standard rate, Mon-Fri 9am-7pm)
Email: sav.audio@bigben.fr

Question 2

How long does it take to fully charge the BIGBEN Party speaker?

Accepted Answer

The BIGBEN Party requires approximately 6 to 7 hours for a full charge.

To charge the device, simply connect the supplied USB cable to the speaker and plug it into a standard USB power source (computer, 5V power adapter, etc.). The speaker is equipped with a lithium battery of 1200 mAh × 2 and accepts an input of 5V 1A.

We recommend using a quality power adapter for optimal and faster charging than a USB connection on a computer.

Question 3

How to activate Bluetooth mode on the BIGBEN TW7?

Accepted Answer

Step 1: Make sure the speaker is turned on. If not, press the power button.

Step 2: Press the MODE button located on the body of the BIGBEN TW7 several times. The MODE button cycles through the different sources: Bluetooth (BT), FM, USB, SD, and AUX. The LED display should indicate BT to confirm that you are in Bluetooth mode.

Step 3: On your phone or device, enable Bluetooth and start searching for available devices.

Step 4: Select "TW7" from the list of detected Bluetooth devices.

Step 5: If pairing requests a PIN code, enter 0000.

Once paired, your device should automatically reconnect to the TW7 each time Bluetooth is activated, within a range of 10 meters.

Tip: If pairing fails, ensure that Bluetooth is enabled on your phone, and that the TW7 does not have another device already connected. You can also try turning the speaker off and on again, then repeat the procedure.

User manual BIGBEN Loudspeaker : user manuals and guides in PDF

Models BIGBEN Loudspeaker most viewed

Other categories BIGBEN

Recent questions about Loudspeaker BIGBEN