How to remove the back cover of the Konrow Easy S55P smartphone?

Question

Accepted Answer

To remove the back cover of your Konrow Easy S55P smartphone, you must first completely turn off the device as indicated in the official manual. This step is essential to avoid any malfunction during handling.

Once the phone is turned off, look for a thin notch or slot on the edge of the casing, usually located near the sides or bottom of the device. This is the leverage point to start lifting the cover. Carefully examine the contours of the phone before you begin.

Gently insert your nails or a thin plastic tool (like a rigid credit card) into the identified notch. Absolutely avoid metal tools that may scratch or damage the casing. Proceed with caution to avoid breaking the internal clips that hold the cover in place.

Gradually lift the cover by gently prying it, without forcing it abruptly. Once one side is detached, continue around the phone, progressively releasing the clips until the cover is completely free. Never pull violently on the cover, as the clips are fragile.

Once the cover is removed, you will have access to the SIM card slots and the battery, as mentioned in the Konrow Easy S55P manual. When replacing it, align the cover correctly and press firmly on the edges until it clicks into place and you hear the clips lock. Ensure that the cover is securely in place before turning your device back on.

User manual Konrow Smartphone : user manuals and guides in PDF

Models Konrow Smartphone most viewed

Recent questions about Smartphone Konrow