Q: How to change the RGB colors of my TRUST Ture GXT 160 mouse?

To change the RGB colors of your TRUST Ture GXT 160 , you need to use the mouse configuration software. Steps to change the colors: Open the configuration software : Launch the GXT160GAMINGMOUSE.EXE file on your computer Access the DPI settings : Click on the "DPI Settings" tab Assign a color to each DPI level : Choose an LED color for each of your four DPI levels. The colors you select here will be displayed according to the effect mode you choose Choose a lighting effect : Go to the "Lighting Effects" section and select one of the three available modes: Standard : constant light with your assigned DPI colors Breathing : breathing effect (adjustable interval between 4 and 8 seconds) Neon : flashing neon effect (cycle duration between 0.5 and 6 seconds) Adjust the brightness : Set the brightness of the LEDs between 5 and 100% according to your preference and the chosen effect mode Apply the changes : Click the "Apply" button to save your settings in the mouse's memory The colors remain linked to your DPI profiles, allowing you to have different lighting for each DPI level of your mouse.

Question 1

How to download and install the software for my TRUST Ture GXT 160 mouse?

Accepted Answer

To download the software for your TRUST Ture GXT 160 mouse:

Go to the site www.trust.com/22332/driver
Select your operating system (Windows)
Click on "Download EXE" to download the file 22332.exe

Installation:

Run the downloaded file 22332.exe
Follow the installation wizard
Once the installation is complete, launch GXT160GAMINGMOUSE.EXE to access the configuration tool

Important: The software works on Windows only. On macOS and Linux, the mouse will remain functional in standard mode, but advanced features (RGB, button programming, DPI, macros) will not be available.

If you encounter difficulties during installation, please refer to the manufacturer's support FAQ.

Question 2

How to change the RGB colors of my TRUST Ture GXT 160 mouse?

Accepted Answer

To change the RGB colors of your TRUST Ture GXT 160, you need to use the mouse configuration software.

Steps to change the colors:

Open the configuration software: Launch the GXT160GAMINGMOUSE.EXE file on your computer
Access the DPI settings: Click on the "DPI Settings" tab
Assign a color to each DPI level: Choose an LED color for each of your four DPI levels. The colors you select here will be displayed according to the effect mode you choose
Choose a lighting effect: Go to the "Lighting Effects" section and select one of the three available modes:
- Standard: constant light with your assigned DPI colors
- Breathing: breathing effect (adjustable interval between 4 and 8 seconds)
- Neon: flashing neon effect (cycle duration between 0.5 and 6 seconds)
Adjust the brightness: Set the brightness of the LEDs between 5 and 100% according to your preference and the chosen effect mode
Apply the changes: Click the "Apply" button to save your settings in the mouse's memory

The colors remain linked to your DPI profiles, allowing you to have different lighting for each DPI level of your mouse.

Question 3

How to set the DPI to 1600 on the TRUST GXT 155 20411 mouse?

Accepted Answer

To set your DPI to 1600 on this gaming mouse, you need to use the Trust GXT 155 Gaming Mouse Software provided with your mouse.

Software Installation:

Insert the CD-ROM provided with the mouse
Run Setup.exe to install the software
Then connect your mouse to a USB port

DPI Configuration:

Open the software from the taskbar
Access the DPI resolution settings
Use the slider to adjust the value to 1600 DPI
You can configure the X and Y axes separately by expanding the advanced options

If you do not have the CD-ROM, you can download the software from the official Trust website. Once configured, your DPI settings are stored in the mouse profiles (5 profiles available).

Question 4

How to disable the RGB lights on the TRUST Sikanda GXT 164 mouse?

Accepted Answer

To disable the RGB lights on your TRUST Sikanda GXT 164 mouse, you need to use the Trust software provided with the mouse. Open the Trust GXT 164 software by clicking on its shortcut (it is installed from www.trust.com/21726/driver).

Once the software is open, click on the EFFECT tab. You will see four available lighting modes: Constant, Flashing, Alternating Colors, and Off. To completely disable the RGB lights, select the Off mode.

The changes you make in the software are applied directly and automatically to your mouse. Once the Off mode is selected, the LEDs will be completely disabled and will no longer light up. You can return to the software at any time and choose another lighting mode (Constant, Flashing, or Alternating Colors) if you wish to reactivate the lights in the future.

If the software is not installed on your computer, download it by visiting www.trust.com/21726/driver, select 'Download EXE' to download it, then run 'Setup-GXT 164.exe' and follow the installation instructions.

User manual TRUST Mouse : user manuals and guides in PDF

Models TRUST Mouse most viewed

Other categories TRUST

Recent questions about Mouse TRUST