How to disable the shutter sound on the AGFAPHOTO DC8200 camera?

Question

Accepted Answer

To disable the sound on the AGFAPHOTO DC8200 camera, you need to access the setup menu and turn off the Beep setting. Follow these precise steps:

Press the MENU button and then the Right button to access the camera's setup menu.
Use the Up/Down buttons to select the Beep option in the menu, then press MENU to enter the sub-menu.
Again, use the Up/Down buttons to choose between On (enabled) and Off (disabled).
Select Off to mute the sound, then press MENU to confirm.
Press the MODE button to return to photo mode.

Once this operation is completed, the sounds of the camera will be completely disabled. The Beep setting controls all sounds emitted by the device, including button beeps and system sounds. This change applies in all modes (photo, video, and playback).

Note that on the DC8200, the mechanical noise of the shutter release is a physical sound generated by the shooting mechanism itself, distinct from the electronic beep sound. If you still hear a slight mechanical noise after disabling the Beep, it is the natural mechanical sound of the shutter release that cannot be eliminated electronically.

User manual AGFAPHOTO Camera : user manuals and guides in PDF

Models AGFAPHOTO Camera most viewed

Other categories AGFAPHOTO

Recent questions about Camera AGFAPHOTO