R707A - Slicer GORENJE - Free user manual and instructions

Product Type	Electric Slicer
Brand	Gorenje
Model	R707A
Cutting Width Range	0 to 15 mm
Blade Type	Removable, sharp metal blade
Operation Modes	Momentary (press-and-hold) and continuous (lock-on) with start lock-out safety
Safety Features	Start lock-out button, automatic shut-off when power interrupted, safety instructions for sharp blade
Maximum Continuous Use	10 minutes (then must cool down)
Noise Level	Less than 75 dB(A)
Power Supply	Mains, earthed wall socket required
Intended Use	Domestic and similar non-industrial applications; suitable for firm foods like bread, sausage, semi-hard cheese
Included Accessories	Carriage (sliding feed table), "sausage end" holder, cord store
Cleaning and Maintenance	Wipe appliance and blade with damp cloth; carriage and holder dishwasher-proof; blade removable for cleaning
Storage	Set cutting width to 0, lock carriage, stow cord in cord store; keep out of reach of children
Repairs	Only by authorized customer service; do not use if damaged

Frequently Asked Questions - R707A GORENJE

Can I cut frozen food or bones with this slicer?

No, the slicer is only suitable for firm foods such as bread, sausage, or semi-hard cheese. Cutting frozen food, bones, or very hard cheese is not permitted and could damage the blade or motor.

How do I clean the blade safely?

Always unplug the appliance and remove the blade before cleaning. Hold the blade by its attachment, not the cutting surface. Wipe with a damp cloth and then dry. Do not immerse in water or use abrasive cleaners.

What should I do if the motor stops during use?

The motor may overheat after prolonged use. Switch off the appliance and allow it to cool down for at least 10 minutes before resuming. The maximum continuous operating time is 10 minutes.

Is the slicer suitable for left-handed users?

The slicer is designed for standard operation, but the start lock-out and ON button can be operated with either hand. However, the carriage and blade orientation are fixed. Left-handed users should exercise caution and follow all safety instructions.

How do I replace the blade?

First unplug the appliance. Slide the carriage back to access the blade. Rotate the blade attachment clockwise to remove. To insert, hold the attachment vertically and rotate anticlockwise until it clicks into place. Ensure the blade is locked securely.

Can I wash the carriage and sausage end holder in the dishwasher?

Yes, the carriage and sausage end holder are dishwasher-proof. The main body and blade must be cleaned only with a damp cloth and not immersed.

Why does the blade keep spinning after I release the ON button?

The blade coasts for a short time after switching off. This is normal. Wait for the blade to come to a complete stop before removing food or cleaning. Always set cutting width to 0 after use.

What is the maximum thickness I can slice?

The cutting width can be adjusted from 0 to 15 mm using the rotary knob. The maximum slice thickness is 15 mm.

How do I lock the carriage for storage?

Set the cutting width to 0, slide the carriage toward the blade until it stops, then move the slide (part 6) to position 1 (left) to lock the carriage in place. Stow the cord in the cord store.

What should I do if the power cord is damaged?

Do not use the appliance. Contact Gorenje customer service for a replacement cord. Only authorized personnel should repair the appliance to avoid hazards.

USER MANUAL R707A GORENJE

3D rendering of a metallic cylindrical scanner or optical device with internal components and mounting brackets (no visible text or symbols)

R707A

This appliance is designed only for domestic use or similar non-industrial applications.

Non-industrial applications include e.g. use in employee kitchens in shops, offices, agricultural and other commercial businesses, as well as use by guests in boarding houses, small hotels and similar dwellings.

Use the appliance for processing the usual household quantities of food.

Please keep the instruction manual in a safe place and if the appliance changes hands, pass them on to a new owner.

SAFETY INSTRUCTIONS

Risk of injury from sharp blade!

The blade is very sharp.

Keep hands clear of the blade.

After switching off, the drive continues for a short time. Wait for the blade to come to a standstill!

After work, set cutting width to 0.

This appliance must be used with the sliding feed table and the piece holder in position unless this is not possible due to the size or shape of the food.

The appliance may be connected and operated only in accordance with the specifications on the rating plate.

Do not use the damaged appliance or the damaged power lead.

Only our customer service may repair the appliance, e.g. by replacing a damaged power cord, in order to avoid hazards.

Never connect this appliance to an external timer switch or remote control

system in order to avoid a hazardous situation.

After using the appliance, if it is left unattended or if the appliance is faulty, always disconnect the power lead from the mains socket.

Never leave the appliance unattended while it is switched on!

Do not pull the power lead over sharp edges. To prevent injury, any repairs such as replacing a damaged power lead, should only be carried out by customer service.

Worn-out appliances must be made unsuitable for further use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Cleaning and user maintenance must not be performed by children.

Keep the appliance out of the reach of children.

The wall socket must be accessible and must be earthed according to technical specification.

The appliance is only suitable for cutting firm foods, such as bread, sausage or semi-hard cheese.

The cutting of other substances (e.g. wood) or very hard foods (bone, hard cheese, deep-frozen food) is not permitted.

If the power supply is interrupted, the appliance remains switched ON and will start running again when the power supply is restored.

Risk of electric shock!

Never immerse the appliance in water orplace under running water and do not clean in the dishwasher.

Do not use the appliance near a sink filled with water!

Caution

Motor may overheat! After a maximum 10 minutes of continuous use, switch OFF the appliance and allow to cool down.

Noise level: Lc < 75 dB(A)

Overview

Fig. A

1 Rotary knob and stop plate

Set slicing width (0 to 15 mm).

2 Start lock-out

Press and hold to switch on. Prevents the appliance from being unintentionally switched on.

3 ON button

Instantaneous setting

4 Blade

5 Carriage

Guide the food which is to be sliced against the blade.

6 Slide

Pos. 1 (slide on left)

= Lock the carriage in the end position

Pos. 2 (slide in right)

= Carriage movable

7 Base

Supports the carriage.

8 "Sausage end" holder

Cuts residual pieces safely.

9 Cord store

Operation

Before using the appliance for the first time, clean thoroughly.

Preparation

Fig. A

- Place the appliance on a smooth, clean surface.

- Pull out cable from the cord store 9 to the required length:

1. Remove cable from the two clamping slots.

2. Pull out/push in cable past the cover to the required length.

3. Re-attach cable end.

Attach carriage 5 and "sausage end" holder 8.

- Use the rotary knob 1 to set the required cutting width.

- Insert the plug.

Switching the appliance ON/OFF

Risk of injury from sharp blade!

Blade is very sharp. Keep hands clear of the blade. After switching off, the drive continues for a short time. After work, set cutting width to 0.

Instantaneous switching

1. Press the switch-on safety device and hold down.

2. Then press ON button until the power tool starts running.

3. Release the switch-on safety device again.

To stop the appliance, release the ON button.

Continuous operation

1. Press the switch-on safety device and hold down.

2. Then press ON button until it locks into position.

3. Release the switch-on safety device again.

To stop the appliance, press the ON button again and release.

Slicing

Fig. A

1. Slide the slide 6 to right.

2. Pull carriage away from the blade to the end position.

- Place the food which is to be sliced on the carriage and gently push against the stop plate.

- Slowly slide the food which is to be sliced against the moving blade.

After using the appliance

• Release the ON button.
• Set the slicing width to 0.
• Slide the carriage towards the blade into the end position and lock with the slide 6 in Pos. 1.

Notes:

• Cut sausage and cheese first and bread last. The appliance is then easier to clean.
• For reasons of hygiene, the appliance and the blade should be cleaned immediately after slicing greasy food (e.g. meat, sausage, cheese). X “Cleaning”

Cleaning

The appliance requires no maintenance! Thorough cleaning guarantees a long service life.

Risk of electric shock!

Never immerse the appliance in water or place under running water and do not clean in the dishwasher.

Risk of injury from sharp blade!

Before cleaning the appliance, pull out the mains plug and remove the blade. Do not grip the blade by the cutting surface, but by the blade attachment.

Risk of injury from falling blade!

When re-attaching the blade, ensure that it is locked correctly in position = blade holder in horizontal position.

Caution!

- Surfaces may be damaged. Do not use abrasive cleaning agents.

Cleaning the appliance

• Wipe the appliance and blade with a damp cloth and then a dry cloth. If required, use a little detergent.
• Carriage and "Sausage end" holder are dishwasher-proof.

Removing/inserting the blade Fig. B

• Slide back the carriage until the blade is accessible.
  -1. Rotate the blade attachment all the way in a clockwise direction.

• Carefully remove the blade.

Fig. C

•1. To insert the blade, hold the blade attachment vertically and insert.
2. Rotate blade attachment all the way in an anti-clockwise direction (must "click" into position).

Removing/inserting the carriage

Fig. D

1. Set the rotary knob to Pos. ↓
2. Pull carriage back as far as possible and remove from the base.
3. Insert by sliding the carriage along the guide in the base.

Storage

Risk of injury from sharp blade!

Keep the appliance out of the reach of children.

Fig. A

• Set the rotary knob 1 to 0.
• Slide the carriage towards the blade into the end position and lock with the slide 6 in Pos. 1.
• Unplug the cord and stow in the cord store 9.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European-wide validity of return and recycling on Waste Electrical and Electronic Equipment.

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Guarantee & service

If you need information or if you have a problem, please contact the Gorenje Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Gorenje dealer or contact the Service department of Gorenje domestic appliances. For personal use only!

We reserve the right to any modifications!

GORENJE WISHES YOU A LOT OF PLEASURE WHEN USING YOUR APPLIANCE

CZ

KRÁJEČ NA POTRAVINY R707A

GWARANCJA I SERWIS NAPRAWCZY