ReadyWarm 7500 Flames - Fireplace CECOTEC - Free user manual and instructions

Product Type	Electric Fireplace
Brand	Cecotec
Model	ReadyWarm 7500 Flames
Power Supply	220-240 V ~50/60 Hz
Heating Power	2000 W (approx.)
Dimensions (approx.)	75 x 30 x 60 cm
Weight (approx.)	15 kg
Material	Metal, glass
Heating Modes	High (H1), Low (H2), Night (L3), Convection (L4)
Temperature Range	15 °C to 35 °C (59 °F to 95 °F)
Timer	0 to 24 hours
Number of Flame Colors	9 colors (red, yellow, blue, orange, combinations)
Display / Control Panel	Integrated with touch buttons
Remote Control	Included (battery not supplied)
Child Safety	Lock by long press on power button
Memory Function	Restores last settings after shutdown
Ventilation	Delayed stop of 60 seconds for heat dissipation
Maintenance	Clean with soft damp cloth, vacuum grilles
Installation	On stable horizontal surface, clearance of 1 m around
After-Sales Service	Contact Cecotec official customer service

Frequently Asked Questions - ReadyWarm 7500 Flames CECOTEC

How to install the ReadyWarm 7500 Flames fireplace?

Place the unit on a horizontal and stable surface, at least 1 meter away from any flammable material. Mount the four supplied feet by fitting them into the bottom corners and screwing them in. Plug into a grounded outlet.

How to use the remote control?

The remote control allows you to control all functions: on/off, change mode (H1, H2, L3, L4), adjust temperature, timer, flame color and brightness, and activate child lock. Insert a battery (not supplied) before use.

What are the different heating modes?

The modes are: High (H1) - powerful lower heating, Low (H2) - reduced lower heating, Night (L3) - lower heating + upper convector (switches to convection after 1 hour), Convection (L4) - only the upper convector.

How to set the timer?

Press the timer button briefly ( ). Use the + and - buttons to adjust from 0 to 24 hours. Once set, the timer will turn off the unit after the specified delay. If the unit is off, it will turn it on after this delay.

How to change the flame color?

Press the flame button briefly ( ) to cycle through 9 colors (1 to 9) or turn off the flame (0). The colors include red, yellow, blue, orange and their combinations.

Is the fireplace safe for children?

Yes, it has a child lock. On the unit, long press the power button (5 seconds) to lock. On the remote, press the padlock button. Unlocking is done the same way.

Why does the fan continue to run after turning off?

This is normal: the fan runs for about 60 seconds after shutdown to dissipate residual heat and protect the components. Do not unplug the unit during this time.

How to clean the unit?

Before cleaning, unplug the unit. Use a soft damp cloth with a mild detergent. Do not use abrasive products. Regularly vacuum the air inlet and outlet grilles to prevent dust buildup.

What to do if the unit does not turn on?

Check that the outlet works and the cable is not damaged. Make sure child lock is not activated (long press the power button). If the problem persists, contact Cecotec after-sales service.

Where to find spare parts or repair service?

For any spare parts or repairs, contact the official Cecotec technical support service. Do not attempt to repair the unit yourself.

USER MANUAL ReadyWarm 7500 Flames CECOTEC

This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use.

Safety instructions 8

1. Parts and components 51
2. Before use 51
3. Installation 51
4. Operation 52
5. Cleaning and maintenance 54
6. Disposal of old electrical and electronic appliances 54
7. Copyright 54
8. Simplified EU Declaration of Conformity 55

SOMMAIRE

EU01_117497 - ReadyWarm 7500 3in1 Total Flames

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage specified on the product's rating label and that the plug is earthed.
• This appliance is intended for domestic use only and is not suitable for use in commercial establishments such as bars, restaurants, farms, hotels, motels, and offices.
• Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by Cecotec's Official Technical Support Service to avoid any danger.
• Do not place the appliance near heat sources, flammable substances, wet surfaces, or allow it to come into contact with water or other liquids. Do not use outdoors.
• Do not cover the device during operation.
• Warning: To avoid overheating, do not cover the heater. The meaning of the figure in the mark is «DO NOT COVER».
• Do not introduce or allow objects to be introduced in the device, this could cause risk of electrical shock, fire or damage.
• Always turn off and unplug the appliance when not in use and before moving it. To unplug the appliance, pull the plug, not the cord.
• Avoid using extension cords, as they could overheat and cause risk of fire.
• The appliance must not be placed directly under a power socket.
• Do not use the heating appliance in the immediate vicinity of a bath, shower, or swimming pool.
• Do not use this heating appliance if it has been dropped.
• Do not use if there are visible signs of damage to the heating appliance.
• Use this heating appliance on a horizontal and stable surface, or fix it to the wall, as applicable.
• WARNING: do not use this heating device in small rooms that are occupied by people who cannot leave the room by themselves, unless permanent supervision is provided.
• WARNING: to reduce the risk of fire, keep textiles, curtains, or other flammable material at least 1 m away from the air outlet.
• CAUTION: some of the product's parts may become very hot and cause burns. Particular attention should be paid when children and/or vulnerable people are present.
• One of the most common causes of overheating is the building up of debris or fluff in the appliance. Be sure to clean these accumulations periodically by vacuuming the vents and grilles.
• Do not place the appliance on carpets, and do not place the cable under carpets. Position the cord in such a way as to avoid obstructing passage and cause tripping hazards.
• Do not store it until it cools down. Store it in a cool, dry place when not in use.
• Keep the appliance out of the reach of children under 3 years of age unless they are continuously supervised.
• Children between 3 and 8 years old should only switch the appliance on or off when it has been placed or installed in its normal, intended operating position and if they have

been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children between 3 and 8 years old should not plug in, adjust, and clean the appliance and should not carry out maintenance tasks.

- This appliance can be used by children aged 8 and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and maintenance should not be carried out by children without supervision.

- Supervise children to ensure they do not play with the product. Close supervision is necessary when the appliance is being used by or near children.

SAFETY INSTRUCTIONS

1. Convector heat outlet
2. Heater outlet
3. Handle
4. Display/Control panel
5. Feet

Note:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in packaging designed to protect it during transport. Remove the appliance from its box. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content:

• Product
• Remote control
• Feet
• Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. INSTALLATION

Fitting the feet

• Install the four feet onto each corner of the appliance's base.
• Use the thicker end of the foot to fit the protruding block in the bottom corner, align the screw holes and secure the screws.

- If a foot does not fit properly, try another corner and repeat the previous steps.

4. OPERATION

Control panel (Fig. 2)

1. Display
2. Increase temperature/Timer up/Flame colour change
3. Decrease temperature/Timer down/Flame colour change
4. Timer on/off
5. Mode selection: High/Low/Night/Convection
6. Flame on/off
7. Power on/off / Child lock button

Remote control (Fig. 3)

1. Flame colour change button
2. Power on/off
3. Mode selection: High/Low/Night/Convection/Silent mode/Flame display mode
4. Timer on/off
5. Child lock button
6. Decrease temperature/Timer down/Flame colour change
7. Flame brightness adjustment button
8. Increase temperature/Timer up/Flame colour change

Note: The button functions are identical whether using the remote control or control panel.

Power On/Off / Child Lock

Press the power button (Fig. 2.7) (Fig. 3.2) to turn on the unit. Press and hold the power button for 5 seconds to activate the child lock, which prevents accidental operation of any buttons.

To deactivate the child lock, press and hold the button again.

On the remote control, the child lock is activated by pressing the lock button (Fig. 3.5).

Note:

- If the display remains unused for 15 seconds, it enters sleep mode. To reactivate the display, touch it twice. The first touch activates the backlight; the second touch enables operation.

- The fan has a 60-second delayed shutdown for normal heat dissipation protection. Do not disconnect the power during this period.

Flame On/Off

Briefly press the flame button (Fig. 2.6) (Fig. 3.1); the flame will display in red.

There are 9 colours available. The number 0 on the display indicates the flame is off. The colour options are as follows:

1 → red 2 → yellow 3 → blue 4 → orange 5 → red + blue 6 → yellow + blue 7 → yellow + blue + orange 8 → yellow + red + blue 9 → yellow + red + blue + orange 0 → flame light off

Modes

Press the mode button (Fig. 2.5) (Fig. 3.3) to activate heating and cycle through the following modes:

• High (H1): Lower heater
• Low (H2): Lower heater
• Night (L3): Lower heater + upper convector
• Convection (L4): Upper convector

Note:

• In each mode, the thermostat can be adjusted from 15°C to 35°C (59°F to 95°F).
• In Night mode, the unit operates in High mode for 1 hour before switching to Convection mode.
• When changing from H1 to H2 mode, the heater will emit two beeps.

Value adjustment buttons

Press the increase (Fig. 2.2) (Fig. 3.8) and decrease (Fig. 2.3) (Fig. 3.6) buttons to adjust the thermostat, timer, flame colours, flame brightness, and flame speed.

Press and hold the increase button for 5 seconds to adjust flame brightness; press and hold the decrease button for 5 seconds to adjust flame speed.

Timer

Briefly press the timer button (Fig. 2.4) (Fig. 3.4) to set the timer from 0 to 24 hours.

Press and hold the timer button for 5 seconds; the display will show 00, and the flame colours and brightness will change automatically.

Note: When the appliance is on, the timer functions as an off timer; when the unit is off, it sets the time for the timer to turn on.

Memory function

This heater features a data memory function. When the heater is switched on after being turned off, it automatically retains all settings from before the last shutdown, including:

1. Flame brightness/colour/speed settings
2. Temperature/timer settings and other parameters

After a power disconnection and restart, all settings will be restored to factory defaults.

5. CLEANING AND MAINTENANCE

Before performing any cleaning or maintenance operations, disconnect the appliance from the mains power supply.

For cleaning, it is recommended to use a soft, damp cloth and mild detergent. Do not use abrasive cloths or implements that might affect the appliance's surface. Check that the hot air outlet and ventilation inlet are free from dust and dirt. During cleaning, be careful not to touch the heating elements.

In case of malfunction and/or faulty operation, disconnect the appliance from the mains power supply and contact an authorised repair technician.

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help protecting the environment.

7. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

8. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

FRENCH

1. PARTS AND COMPONENTS

Img. 1

https://cecotec.es/es/information/declaration-of-conformity

GREEK

1. PARTS AND ACCESSORIES

Figure 1

Fig./Img./Abb./Afb./Rys.2

www.cecotec.es