Chop & Go - Food Processor CASO - Free user manual and instructions

Product Type	Cordless food processor chopper/blender
Brand	CASO
Model	Chop & Go
Power supply	Rechargeable lithium-ion battery via USB-C cable (power adapter not included)
Maximum capacity	500 g of food
Bowl material	Heat-resistant glass (0 °C to 75 °C)
Number of blades	4 stainless steel blades
Speeds	2 speeds: I (slow) and II (fast)
Battery life	Up to 60 minutes in normal use
Charging time	Approximately 5 hours
Motor protection	Automatic shut-off after 5 minutes of continuous use to prevent overheating
Included accessories	Cutting unit, emulsifying disc, blade guard, storage lid, USB-C cable, spatula
Cleaning	Bowl and accessories dishwasher safe; motor unit wipe with damp cloth, do not immerse
Safety	Safety switch preventing operation if lid is not properly placed; very sharp blades, handle with care
Recommended uses	Chop vegetables, fruits, meat, fish, tofu, nuts; prepare sauces, pesto, creams, vinaigrettes
Not recommended uses	Crushing ice cubes, bones, coffee beans, nutmeg, foods above 75 °C
Warranty	24 months (valid in Germany, Austria, Netherlands; for other countries, contact customer service)
Repairability	Non-replaceable battery; repairs exclusively by an authorized professional
Storage	Battery fully charged for storage up to 3 months

Frequently Asked Questions - Chop & Go CASO

How to use the Chop & Go food processor?

Assemble the device by placing the blades or emulsifying disc in the glass bowl, add food (max 500 g), close the lid and snap on the motor unit. Press the Speed I (slow) or Speed II (fast) button to chop. Release to stop. Use in pulses of 1 minute maximum, with a pause between cycles. After 5 minutes of continuous use, the device stops automatically to prevent overheating.

How to recharge the battery?

Open the charging cover on the motor unit, plug the small end of the included USB-C cable, then connect the large end to a USB power adapter (not included) and plug it into a socket. The indicators flash during charging and stay on once fully charged (about 5 hours). You can also use the device while it is charging.

What foods can I chop with this appliance?

The appliance is designed to chop soft vegetables (onions, garlic) at speed I and hard foods (carrots, meat, nuts) at speed II. It can also blend sauces, pesto, creams and vinaigrettes. Do not crush ice cubes, bones, coffee beans, nutmeg or foods above 75 °C.

How to clean the Chop & Go?

Disconnect the USB cable before cleaning. The glass bowl, blades, emulsifying disc and lid are dishwasher safe or can be washed in warm soapy water. Do not immerse the motor unit; wipe it with a damp cloth. Dry all parts thoroughly before reassembling. The blades are very sharp, handle them by the drive shaft.

What to do if the appliance does not start?

Check that the appliance is correctly assembled: the lid must be firmly snapped onto the bowl and the motor unit turned clockwise until it locks. If the battery is empty, recharge it. If the battery indicator flashes, the charge is insufficient. Consult the Troubleshooting section in the manual.

What is the maximum capacity of the bowl?

Do not put more than 500 g of food in the glass container. Overfilling may cause overload, abnormal vibrations or automatic shutdown. If food clumps around the blades, stop the appliance, remove the motor unit and carefully dislodge with the spatula.

Can the appliance crush ice?

No, the appliance is not designed to crush ice cubes or foods of similar hardness (bones, coffee beans, nutmeg). Use it only for soft or hard but non-frozen foods.

How to know if the battery is low?

During use, the three indicators gradually turn off. When the first (lowest) indicator flashes, the capacity is below 20 % and needs recharging. During charging, the indicators flash according to level: below 33 %: all three flash; between 33 and 65 %: one on, two flash; between 66 and 99 %: two on, one flash; above 99 %: all three are steady.

Can I use the appliance continuously for a long time?

No, the appliance is designed for short operation. Run the appliance for a maximum of 1 minute, then let it cool for a few moments. After 5 minutes of cumulative use, it stops automatically to prevent overheating. Let it cool for about 15 minutes before resuming.

What is the warranty of the Chop & Go?

CASO offers a 24-month warranty from the date of purchase for manufacturing or material defects, valid in Germany, Austria and Netherlands. For other countries, contact customer service. The warranty does not cover damage due to misuse or wear parts. Keep the proof of purchase.

USER MANUAL Chop & Go CASO

Exterior view of a black and white CosO design tool with transparent glass casing (no text or symbols on the device itself)

Technische Daten / Technical Data / Caractéristiques techniques / Dati tecnici / Datos técnicos / Technische gegevens / Especifi cações técnicas / Tekniska data

Gerät / Device / Appareil /Apparecchio / Aparato / Aparaat / Aparelho / Apparat	Kabelloser Multizerkleinerer, Cordless multi-chopper, Multibroyeur sans fi l, Tritatutto senza cavi, Picadora multiusos inalámbrica, Cordless multi-chopper, Triturador múltiplo sem fi o, Kabelfri multihackare
Name / Name / Nom / Nome / Denominación / Name / Nome / Namn	CASO Chop & Go
Artikel-Nr. / Item No. / N°. d'article / N. Articolo / N° de art / Artikelnr. / N.° de artigo / Artikel-nr.	01747
Anschlussdaten / Mains data / Données de raccordement / Dati connessione / Conexión / Aansluit-gegevens / Dados de ligação / Anslutningsdata	10,8V (3 x 3.6V), 2000mAh
Leistung / Power / Puissance / Potenza / Potencia / Vermogen / Potência / Eff ekt	200 W
Außenabmessungen (B/H/T) / External measurements (W/H/D) / Dimensions extérieures (l/h/p) / Misure esterne (L/H/P) / Dimensiones exteriores (An/H/P) / Afmetingen (B/H/D) / Dimensões externas (L/A/P) / Yttermått apparaten (B/H/D)	140 mm x 235 mm x 140 mm
Nettogewicht / Net weight / Poids net / Peso netto / Peso net / Nettogewicht / Peso líquido / Nettovikt	1,63 kg

Technical diagram showing two mechanical components labeled A and B, with section B containing a flanged base and a handle.

HINWEIS

1.2 Warning notices ....19

1.3 Limitation of liability....20

1.4 Copyright protection....20

2 Safety....20

2.1 Intended use....20

2.2 General Safety information....21

2.3 Sources of danger 22

2.3.1 Danger of injury 22

2.3.2 Dangers due to electrical power....23

3 Commissioning 23

3.1 Packaging safety information 23

3.2 Delivery scope and transport inspection....23

3.3 Unpacking....24

3.4 Setup location requirements....24

3.5 Electrical connection....24

4 Design and Function......25

4.1 Overview....25

4.2 Rating plate....26

5 Operation and Handing....26

5.1 Before first use....26

5.2 Assembly 26

5.3 Short term operation 26

5.4 Operation 27

5.4.1 If food gets stuck around the blade unit during use 27

5.5 Recipes....27

5.5.1 Recipe for green pesto | Ingredients for 4 servings ....27

5.5.2 Recipe for a tomato-feta spread 28

5.6 Battery indicator during use....28

5.7 Charging the appliance 28

5.8 Display of the charging process 29

6 Cleaning and Maintenance 29

6.1 Safety information....29

6.2 Cleaning....30

6.2.1 Motor unit....30

6.2.2 Accessories....30

7 Troubleshooting ....30

7.1 Safety notices ....30

7.2 Troubleshooting table 30

8 Disposal of the Old Device 31

8.1 Disposal of the packaging....31

9 Guarantee....31

1General

Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions.

Your multi-chopper will serve you for many years if you handle it and care for it properly.

We wish you a lot of pleasure in using it!

1.1 Information on this manual

These operating instructions are part of the CASO Chop & Go cordless multi-chopper (referred to hereafter as the Device) and provide you with important information for the initial commissioning, safety, intended use and care of the device.

The Operating Instructions must be available at all times at the device. This Operating Manual must be read and applied by every person who is instructed to work with the device:

• Commissioning, - Operation,
• Troubleshooting and/or
• Cleaning

Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with the device.

1.2 Warningnotices

The following warning notices are used in the Operating Manual concerned here.

DANGER

A warning notice of this level of danger indicates a potentially dangerous situation. If the dangerous situation is not avoided, this can lead to death or serious injuries.

Observe the instructions in this warning notice in order to avoid the danger of death or serious personal injuries.

WARNING

A warning notice of this level of danger indicates a possible dangerous situation. If the dangerous situation is not avoided, this can lead to serious injuries.

Observe the instructions in this warning notice in order to avoid the personal injuries.

ATTENTION

A warning notice of this level of danger indicates a possible dangerous situation. If the dangerous situation is not avoided, this can lead to slight or moderate injuries.

Observe the instructions in this warning notice in order to avoid the personal injuries.

PLEASE NOTE

A notice of this kind indicates additional information, which will simplify the handling of the machine.

1.3 Limitation of liability

All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and findings into consideration. No claims can be derived from the information provided, the illustrations or descriptions in this manual.

The manufacturer does not assume any liability for damages arising as a result of the following:

• Non-observance of the manual
• Uses for non-intended purposes
- Improper repairs
- Technical alterations, modifications of the device
- Use of unauthorized spare parts

Modifi cations of the device are not recommended and are not covered by the guaran- tee. All translations are carried out to the best of our knowledge. We do not assume any liability for translation errors, not even if the translation was carried out by us or on our instructions. The original German text remains solely binding.

1.4 Copyright protection

This document is copyright protected.

Braukmann GmbH reserves all the rights, including those for photomechanical reproduction, duplication and distribution using special processes (e.g. data processing, data carriers, data networks), even partially. Subject to content and technical changes.

2Safety

This chapter provides you with important safety notices when handling the device. The device corresponds with the required safety regulations. Improper use can result in personal or property damages.

2.1 Intendeduse

This appliance is intended for

• Chopping, pureeing vegetables, fruit, meat, fi sh, tofu, nuts and much more
• Blending and whipping dressings, dips, pesto and cream.

This device is intended for use in the household and for similar applications such as:

- in kitchens for employees in shops, offices, and other commercial areas;

- in B&Bs,

• in agricultural estates;

- by customers in hotels, motels and other residential establishments.

Thanks to the long-life lithium-ion battery, it is suitable for household use and mobile homes, camping, picnics and similar. Uses for a different purpose or for a purpose which exceeds this description are considered incompatible with the intended or designated use. Do not chop very hard ingredients such as ice.

WARNING

Danger due to unintended use!

Dangers can emanate from the device if it is used for an unintended use and/or a different kind of use.

▶ Use the device exclusively for its intended use.
▶ Observe the procedural methods described in this Operating Manual.

Claims of all kinds due to damages resulting from unintended uses are excluded.

The User bears the sole risk.

2.2 General Safety information

PLEASE NOTE

Please observe the following general safety notices with regard to the safe handling of the device.

Examine the device for any visible external damages prior to using it. Never put a damaged device into operation.
Children must not use this appliance. Keep the appliance and its power supply unit away from children.
The device may be used by individuals with reduced physical, sensory or mental capabilities or a lack of experience and / or knowledge of their use if they are supervised or have been instructed at to the safe use of the device and have understood the resulting hazards.
▶ Children shall not play with the appliance.
▶ Cleaning and user maintenance shall not be made by children.
▶ Do not operate the appliance with wet hands and do not run at no-load.
▶ Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs that may be needed. Improperly performed repairs can cause considerable dangers for the user.
▶ Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfilled.
▶ Only customer service departments authorized by the manufacturer may carry out repairs on the device during the guarantee period, as otherwise the guarantee entitlements will be null and void in the event of any subsequent damages.

PLEASE NOTE

The appliance is equipped with a safety switch and only works when the work bowl lid and the motor unit are placed on the work bowl.
Remove the motor unit from the appliance when the appliance is unattended, not in use or being cleaned.
▶ Unplug the USB-C charging cable before cleaning, maintaining, disassembling or assembling the appliance.
▶ Do not leave the device unsupervised when it is in operation.
▶ Do not operate the device when it is idle.
The appliance is designed for short-time use. Operate it for one minute, then pause. After 5 minutes of continuous use, it stops automatically to protect against overheating.

2.3 Sources of danger

2.3.1 Danger of injury

WARNING

By careless use of the device risk of injury exist because of sharp edges. Note the following warnings to avoid injury.

The blades are very sharp, touch them exclusively at the drive shaft.
▶ Put on the blade guard when you are not using the appliance.
▶ After switching it off, wait for the motor to stop before opening the appliance and replacing accessories. Do not touch any parts that are still in motion!
▶ Never fill hot food / hot liquids into the device. Risk of injury! The device could be damaged.
The appliance is unsuitable for chopping hot or liquid ingredients at a temperature of more than 75 °C.
Do not place the glass container in a microwave oven or oven. Do not wash with hot water above 75 °C.
▶ WARNING: After chopping the ingredients, always remove the knife first and only then the chopped ingredients.

2.3.2 Dangers due to electrical power

DANGER

Mortal danger due to electrical power!

Mortal danger exists when coming into contact with live wires or subassemblies! Observe the following safety notices to avoid dangers due to electrical power:

▶ Do not charge the appliance with a damaged USB-C charging cable or power supply.
The device contains rechargeable batteries that cannot be replaced; therefore, never replace the battery with other batteries.
▶ Never disassemble the motor unit with the battery, expose it to high temperatures or throw it into a fi re.
Do not immerse the device, cord or plug in water or other liquids and do not place in the dishwasher.
If the battery has leaked, ensure the skin, eyes and mucous membranes do not come into contact with the battery acid. In the event of contact with battery acid, immediately rinse the affected areas with plenty of clean water and seek medical help immediately.

3Commissioning

This chapter provides you with important safety notices during the initial commissioning of the device. Observe the following notices to avoid dangers and damages:

3.1 Packaging safety information

WARNING

Personal and property damages can occur during commissioning of the device!

Observe the following safety notices to avoid such dangers:

Packaging materials may not be used for playing. There is a danger of suffocation.

3.2 Delivery scope and transport inspection

The device includes the following components:

• CASO Chop & Go • Blade unit with 4 stainless steel blades
- Blade guard - Container attachment
- Emulsifying disc • Glass container with non-slip mat
- Storage lid - USB-C charging cable (without power supply)
- Spatula - Operating manual

PLEASE NOTE

Examine the shipment to ensure the unit and manual are included and inspect the unit for any visible damage.
Immediately notify the carrier and/or the supplier about an incomplete shipment or any damage as a result of inadequate packaging or mishandling.

3.3 Unpacking

Carefully remove the packaging material and unit from the carton.

PLEASE NOTE

If possible, keep the original packaging for the duration of the guarantee period in the event a return is necessary.

3.4 Setup location requirements

In order to ensure the safe and trouble-free operation of the device, the setup location must fulfil the following prerequisites:

• Place the device on a firm and even work surface.
• Choose the setup location in such a way that children cannot reach the device.
• Do not set up the device in a hot, wet or extremely damp environment or near flammable material:

3.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following instructions must be observed for the electrical connection:

- Before connecting the device, compare the connection data (voltage and frequency) on the rating plate with those of your electrical network. This data must agree in order that no damages occur in the device:

4 Design and Function

This chapter provides you with important safety notices on the design and function of the device.

4.1Overview

① Motor unit
② Speed button I (low speed)

③ Speed button II (high speed)

④ Battery level indicator

⑤ Container attachment

⑥ Drive shaft of the blade unit

⑦ Blade unit

⑧ Glass container
⑨ Non-slip mat
⑩ Drive shaft of the emulsifying disc
⑪ Emulsifying disc
12 Storage lid
13 USB-C charging cable connector with cover
14 Spatula

WARNING

The blades are very sharp, touch them exclusively at the drive shaft.
Keep your fingers, hair and clothing away from the blades.
Do not touch the blades during cleaning of the unit.
Remove the blade guard carefully before using the appliance.
▶ After use, carefully replace the blade guard on the blades.

4.2 Ratingplate

The type plate with the connection and performance data is located on the underside of the motor unit of the appliance.

5 Operation and Handing

This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:

5.1 Before first use

Clean the device as shown in chapter: cleaning and maintenance.

PLEASE NOTE

It is recommended to fully charge the battery before its first use to achieve the best performance.
Before use, ensure all parts are correctly assembled and in place.
There may be a slight odour when using the appliance for the first time. However, it is harmless and disappears with time.

5.2Assembly

1. Place the glass container on a stable surface.
2. Grasp the blades by the drive shaft and carefully remove the blade guard.
3. Place the blade unit or the emulsifying disc on the metal rod in the glass container.
4. Put the desired food into the glass container.
5. Put on the container attachment. Pay attention to the recesses and arrows of the container attachment and the glass container.
6. Place the motor unit on the container attachment and slowly turn it clockwise until it locks into place.
7. The battery indicator lights up when the motor unit is correctly fitted and the appliance is ready for use.

5.3 Short term operation

The device is intended only for short term operation. Operate the appliance for one minute, then pause the operation for a moment. Otherwise the motor could be damaged. If the appliance is used for a total of 5 minutes, it stops automatically to protect against overheating. Let the appliance cool down for about 15 minutes.

PLEASE NOTE

If the load is too great, the appliance switches off automatically and all 3 lights flash 5 times. Release the speed button and reduce the load. Allow the appliance to cool down for about 15 minutes before putting it back into operation.

5.4Operation

1. Assemble the appliance as described under „Assembly“.
2. Press the button of the desired speed level, and the appliance starts.
3. When you release the button, the appliance stops working.
4. After use, wait until the blades or the emulsifying disc stop before removing the motor unit.
5. Remove the blade or emulsifying disc and empty the glass container using the spatula.
6. If necessary, place the storage lid on the glass container.

Use speed I or II depending on the selected food and desired consistency.

Speed I – soft fruits and vegetables, e.g. onion, garlic

Speed II – hard fruits (without seeds), hard vegetables (such as carrots), meat

PLEASE NOTE

Tip! It usually takes only a few seconds to chop food. We recommend chopping the food at intervals.

5.4.1 If food gets stuck around the blade unit during use

1. Release the speed button and wait until the blades have stopped.
2. Remove the motor unit and the container lid.
3. Use the spatula to loosen the food carefully. Do not use your fingers as the blades are sharp.
4. After removing the food and the blades are free, reassemble the appliance and continue operation.

PLEASE NOTE

Do not put more than 500 g of food in the glass container.
Do not grind hard foods such as nutmegs, peppercorns, gristle, ice cubes, coff ee beans or stones.
▶ Do not grind bones or meat with bones.
The glass container is designed for 0 – 75 °C. Therefore, do not fill food that is colder than 0 °C and hotter than 75 °C.
Before starting the appliance, always check that it is assembled correctly.

5.5Recipes

5.5.1 Recipe for green pesto | Ingredients for 4 servings

Ingredients:

• 50 g pine nuts
• 1 tsp salt
  • 100 g grated or shaved Parmesan cheese

• 3 - 4 cloves garlic
• 3 bunches of basil leaves
- 200 ml olive oil

Preparation:

1. Roast the pine nuts in a frying pan without fat until golden brown and leave to cool briefly on a plate.
2. Peel the garlic, put it in the glass container with the salt, pine nuts and basil leaves and chop it.
3. Add the Parmesan cheese and olive oil and continue to chop until the desired consistency is reached.
4. For pasta dishes, mix the pesto with 1 – 2 tablespoons of pasta water and serve mixed with the pasta.

5.5.2 Recipe for a tomato-feta spread

Ingredients:

• 2 cloves of garlic
• 12 small onion
• 200 g cream cheese • 1 tsp basil (fresh or dried)
• Approx. 70 g dried tomatoes (preserved in oil), drained weight
• Salt, pepper, oregano
• 150 g feta

Preparation:

1. Peel and quarter the onion. Next, peel the garlic and place it in the glass container with the onion. Chop for 5 – 10 seconds on speed 2.
2. Add the cream cheese, tomatoes and seasoning. Chop and mix on speed 2 until a uniform consistency is achieved.
3. Break the feta into small pieces and add. Gently mix in the feta on level 1 with the pulse control.

- The oil that the tomatoes were soaked in can also be used for seasoning. Mix in some of the oil in step 2.

5.6 Battery indicator during use

Using the appliance will discharge the battery. The indicator lights go out one after the other from top to bottom and show the battery capacity.

• 66% to 100% of capacity: Lights 1, 2 and 3 all light up.
  • 33% to 65% of capacity: Lights 1 and 2 light up
  • 20% to 32% of capacity: Light 1 lights up
• < 20% of capacity: Light 1 fl ashes and the appliance needs to be charged

PLEASE NOTE

The battery life depends on the consistency, texture and quantity of the food to be chopped. On average, the device has a battery life of up to 60 minutes.

5.7 Charging the appliance

1. Open the charging connector on the motor housing.
2. Connect the micro end (smaller end) of the charging cable to the motor housing.

3. Connect the USB plug (larger end) of the charging cable to a suitable charging adapter.

4. Plug the charging adapter into the power outlet.

5. During charging, the indicator lights flash to show the charging progress. The lights stop flashing when the appliance is fully charged.
6. Once the appliance is fully charged, remove the charging cable.

PLEASE NOTE

It takes about 5 hours to charge the appliance fully.
You can also use the appliance while it is charging.
The appliance can be stored for up to 3 months when fully charged. If stored for more than 3 months, the appliance should be charged before the next use.

5.8 Display of the charging process

The indicator lights provide feedback on the status of charging during the charging process:

• < than 33% of capacity: Lights 1, 2 and 3 flash
• 33% to 65% of capacity: Light 1 is lit continuously and lights 2 and 3 flash
- 66% to 99% of capacity: Lights 1 and 2 are on solid and light 3 is flashing.
• > than 99% of capacity: Lights 1, 2 and 3 are lit continuously.

6 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining the device. Please observe the notices to prevent damages due to cleaning the device incorrectly and to ensure trouble-free operation.

6.1 Safetyinformation

ATTENTION

Please observe the safety instructions, before cleaning your device:

▶ Unplug the charging cable from the appliance before cleaning.
Clean the appliance immediately after each use. Extended waiting unnecessarily complicates cleaning and can make it impossible in extreme cases. Excessive accumulations of dirt can even damage the device under certain circumstances.
If dampness penetrates into the device, this can damage the electronic components.
Do not use any aggressive or abrasive cleaning agents or solvents.
Do not scrape off stubborn dirt with hard items.
Do not immerse the motor unit in water or other liquids, and do not put it in the dishwasher.
The blades are very sharp; only touch them on the drive shaft.
Be careful with them. Carefully place the protection caps and store the device only with the protection caps placed on the blades.
▶ Never leave the blades in soapy water so that they float „invisibly“ in the water.
Dry all parts before reusing or storing them. Store the parts, as well as sharp knives, out of the reach of children.

6.2Cleaning

6.2.1 Motor unit

Do not immerse the motor unit in water or other liquids and do not put in the dishwasher. Wipe the outer surface of the motor unit with a soft, damp cloth.

6.2.2 Accessories

1. Fill approx. 400 ml of lukewarm water into the glass container and add a drop of mild detergent.
2. Operate the appliance on level 1 for approx. 20 seconds.
3. Remove the motor unit.
4. Separate the blade units from each other by turning blade unit A counter-clockwise and detaching it from blade unit B.
5. All accessories can be washed in warm water or the dishwasher. Dry the parts well after rinsing.

Technical diagram showing two mechanical components labeled A and B, with arrows indicating assembly or assembly steps.

PLEASE NOTE

Do not add more water or detergent as described as the mixture may overflow.

7Troubleshooting

This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:

7.1 Safetynotices

ATTENTION

Repairs of electrical appliances must be carried out by qualified person who are trained by the manufacturer.
Repairs performed by untrained persons may result in considerable hazards for the user and damage the machine.

7.2 Troubleshootingtable

Problem Cause Solution

The device is not working after pressing a button.	The device is not assembled correctly.	Check the assembling of the device.
	The battery is empty. Charge	the battery.
The device stops during use.	The appliance has been used for too long, or there is too much food in it.	Let the appliance cool down for at least 15 minutes, and remove some of the food if necessary.

The device vibrates abnormally or is louder than usual.

The appliance is not assembled correctly or is standing on an uneven surface. There is too much food in the appliance.

Check the assembling of the device. Place the device on a stable surface.

Remove some of the food.

PLEASE NOTE

If you cannot solve the problem by carrying out the steps described above, our Customer Service will help you free of charge.
Clean the device before you send it to customer service.

8 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials. However, they also contain damaging substances, which were necessary for their functionality and safety. If these were put in the non-recyclable waste or were handled incorrectly, they could be detrimental to human health and the environment. Therefore, do not put your old device into the non-recyclable waste under any circumstances.

PLEASE NOTE

Utilise the collection point, established in your town, to return and recycle old electric and electronic devices. If necessary, contact your town hall, local refuse collection service or your dealer for information.
▶ Ensure that your old device is stored safely away from children until it is taken away.

8.1 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging materials are selected in accordance with environmentally compatible and recycling-related points of view and can therefore be recycled. Returning the packaging back to the material loop saves raw materials and reduces the quantities of accumulated waste.

Take any packaging materials that are no longer required to "Green Dot" recycling collection points for disposal.

9Guarantee

We provide a 24-month guarantee for defects caused by production or material faults, beginning on the date of purchase. Our guarantee is valid for Germany, Austria and the Netherlands. For all other countries, please contact us.

Your legal guarantee claims as per Art. 437 ff . German Civil Code (BGB) will remain unaff ected by this. You may exercise your statutory guarantee rights free of charge. The guarantee does not cover damage caused by improper handling or use of the product or defects which have only a minor impact on the product's functionality or value. In addition to this, the guarantee also excludes parts which are subject to wear and tear; transport damages

DE

EN

insofar as we are not responsible for them and damages caused by repairs which were not carried out by us.

FR

This product has been constructed for non-commercial use (domestic use) and its performance is designed to meet the corresponding needs. The guarantee only covers commercial use insofar as it is comparable to domestic use. The product is not intended for any other type of commercial use.

IT

In the case of legitimate complaints we may either repair the defective product or replace it with a defect-free product at our discretion. Obvious defects must be notified to us within 14 days of the product's delivery. Any further claims are excluded.

ES

NL

When making a guarantee claim please contact us before you return the product (always with the purchase receipt!). Our contact details ("Guarantor") are provided at the beginning of this instruction manual.

PT

SE

Table des matières

4.2Plaquesignalétique

Technical diagram showing two mechanical components labeled A and B, with section B containing a flanged base and a handle.

REMARQUE

Technical diagram showing two mechanical components labeled A and B, with section B containing a flanged tool and a cylindrical component.

INDICAZIONE

Technical diagram showing two mechanical components labeled A and B, with arrows indicating assembly or assembly steps.

NOTA

Technical diagram showing two mechanical components labeled A and B, with arrows indicating assembly or assembly steps.

TIP

Technical diagram showing two labeled mechanical components (A and B) with directional arrows indicating assembly or movement.

NOTA

6.1 Rengöring....119

6.2.1 Motorenhet....119

6.2.2 Tillbehörsdelar....119

Technical diagram showing two mechanical components labeled A and B, with section B containing a blade-like structure.

OBS