IAN 385269 - Shower column Livarno Lux - Free user manual and instructions
Find the device manual for free IAN 385269 Livarno Lux in PDF.
| Product type | Shower column |
| Brand | Livarno Lux |
| Model | IAN 385269 |
| Dimensions (H × W) | Approx. 97 × 34 cm |
| Shower head | Approx. 22 cm |
| Hand shower | Approx. 10 cm |
| Minimum water pressure | 2 bar |
| Flexible connection | G 1/2 (12) |
| Shower hose length | Approx. 150 cm |
| Connection hose length | Approx. 50 cm |
| Jet types (hand shower) | Normal, Normal-soft, Soft, Normal-Massage, Massage |
| Usage | For pressure-resistant hot water systems (central heating, instantaneous water heater, etc.) |
| Safety instructions | Turn off water supply before installation; ambient temperature >10°C; do not use with low-pressure water heaters |
| Care | Clean with a damp cloth; avoid abrasive products, solvents or alcohol |
| Warranty | 3 years from date of purchase |
| Customer service | Tel: +800 34 99 67 53, Email: meister-service@conmetallmeister.de |
Frequently Asked Questions - IAN 385269 Livarno Lux
User questions about IAN 385269 Livarno Lux
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Shower column in PDF format for free! Find your manual IAN 385269 - Livarno Lux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 385269 by Livarno Lux.
USER MANUAL IAN 385269 Livarno Lux
Assembly, operating and safety instructions
NL BE
HOOFDDOUCHESET MET ANTI-DRUP SYSTEEM
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device.
FR BE
GB/IE Assembly, operating and safety instructions Page 11
List of pictograms used
Introduction
Intended use Page 12
Parts description.. Page 12
Technical data.. Page 12
Scope of delivery.. Page 13
Safety notes.. Page 13
Installation
Use
Cleaning and care
Maintenance... Page 15
Disassembly
Disposal
Information
Checking if tap water is drinkable. Page 15
Warranty and service.. Page 15
| List of pictograms used | |||
| i | Read the installation instructions and instructions for use! | Danger to life and risk of accidents for infants and children! | |
| ! | Observe the warnings and safety instructions! | Warning - risk of electric shock! Danger to life! | |
Overhead shower kit with Anti-Drip System
Introduction
Congratulations on the purchase of your new product. You have chosen a high-quality product. The assembly instructions
and instructions for use are a part of the product. Please carefully read these assembly instructions and instructions for use before use and observe all instructions. These instructions contain important information about installation, settings and care. Please keep these assembly instructions and instructions for use and pass them on to any future owner.
Intendeduse
This product is only intended to control the water supply. This product is suitable for all pressure-resistant water systems such as central heating, continuous-flow water heater, pressure boiler, etc. This product is not suitable for low pressure water heaters or pressure-free small storage reservoirs, e.g. wood- or coal-burning domestic hot water heaters, oil or gas-fired hot water heaters, or open electrically heated cylinders. When in doubt please consult a plumber or heating specialist. Any other use or product modification is prohibited and will result in damage. Any other use is considered improper and harbours significant accident risks or risks of property damage. This product is solely intended for private use.
- Partsdescription
1 Shower bar
2 Union nut
3 Seal (overhead shower head)
4 Ball joint
Overhead shower head
Handheld shower head
7 Hose seal
8 Shower hose
9 Diverter
10 Connection hose
11 Tool
12 Seal (diverter)
13 Brass thread
14 Connector
15 Wall bracket with covering rosette
Fixing screw
17 Installation plate
18 Wall plug
19 Handheld shower head holder
Technical data
Minimum
pressure: 2 bar
Dimensions: approx. 97 × 34 cm (H × D),
Overhead shower head:
approx. 22~cm
Handheld shower head:
approx. 10~cm
Length of shower hose:
approx. 150cm
Length of connection hose:
approx. 50cm
Hose
connection: 12''(G12'')
- Scope of delivery
Note: Check that the delivery is complete and that the product and all its parts are in perfect condition immediately after unpacking. Do not under any circumstances use the product if the package contents are incomplete.
1 Overhead shower head
1 Handheld shower head
1 Shower bar
1 Shower hose (approx. 150~cm )
1 Connection hose (approx. 50~cm )
2 Wall brackets incl. 2 covering rosettes
1 Handheld shower head holder
4 Fixing screws
4 Wall plugs (approx. 0 6 mm)
2 Installation plates
4 Hose seals
1 Seal (diverter)
2 Seals (overhead shower head)
1 Tool
1 Diverter
1 Set of installation instructions and instructions for use
Safety notes
WARNING! DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging material. There is a danger of suffocation. Keep this product out of the reach of children. This product is not a toy.
This product may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities or lacking experience and knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance must not be performed by children without supervision.
BEWARE OF ELECTRIC SHOCK!
Before drilling, ensure that there are no electrical cables where you intend
to drill.
CAUTION! RISK OF INJURY!
Make sure that all parts are undamaged and correctly assembled. Assembly may result in injury. Please use seals as wear parts and must be from time to time. Damaged parts act safely and function.
Make sure that all parts are undamaged and correctly assembled. Improper assembly may result in injury. Please note that the seals are wear parts and must be changed from time to time. Damaged parts could impact safety and function.
Installation must only be performed by skilled persons.
CAUTION! DANGER OF SCALDING!
When adjusting the temperature of hot water, be sure not to set the water temperature too high.
CAUTION! WATER DAMAGE! Shut off the main water supply prior to installation.
Ensure that all the seals are positioned correctly.
This product is not suitable for use with low-pressure tanks and open (non-pressurised) electrical storage heaters.
Incorrectly installed shower sets can cause water damage!
Any leakage or sudden escape of water can cause considerable damage to buildings and property. Therefore check carefully that all connections are watertight.
Familiarise yourself with all local conditions prior to installation, e.g. water connection and shut-off device.
Sharp edges can arise even with careful production. Therefore proceed with caution during installation.
Before attaching the product to the wall, check which mounting materials are suitable for your wall. We have supplied mounting materials suitable for an ordinary, solid masonry wall.
Only use the product in rooms with temperatures above 0^ . If there is a risk of frost, shut off the water supply and drain the product.
- Installation
Please familiarise yourself with the product prior to installation. Carefully read the following installation instructions and safety advice. Incorrect installation will void the warranty, particularly with respect to consequential damages.
CAUTION! Turn off the water supply at the mains before starting the installation. Otherwise there is a risk of injury and/or property damage.
Note: You will need an electric drill.
DANGER OF ELECTRIC SHOCK!
Before drilling, ensure that there are no electrical cables where you in
tend to drill.
CAUTION! RISK OF INJURY!
Read the operating instructions included with your drill.
Note: Before installation, remove all packaging material from the product.
First push the wall bracket 15 and then the hand-held shower head holder 19 and the second wall bracket 15 over the shower bar 1 from below (see Figures A to C).
Remove the connector 14 together with the brass thread 13 from the diverter 9 (see Fig. D).
- Attach the brass thread 13 with the connector 14 to the bottom of the shower bar 1 by tightening it counterclockwise using the tool 11 (see Fig. E).
Attention: Left-hand thread!
Twist the diverter 9 clockwise onto the brass thread 13 and when doing so make sure that the seal 12 is correctly positioned (see Fig. F).
Adjust the spacing on the left and right between the two wall brackets 15 and the handheld shower head holder 19 on the shower bar 1, and use a slot-head screwdriver (not included) to tighten the screws on the shower bar 1 in order to attach the wall brackets 15 (see Figures G and H).
- Mark the drill holes using the holes in the installation plates [17] intended for the fixing screws [16] as a guide (approx. 6mm
Now drill the mounting holes and then guide the wall plugs 18 into the drilled holes (see Fig. I).
- Attach both installation plates 17 using the fixing screws 16.
Hold the shower bar 1 with the installed wall brackets 15 at the height of the installation plates 17. Put the covering rosettes for the wall brackets 15 on the installation plates 17 and turn the covering rosettes clockwise to tighten (see Figures J and K). The diverter 9 must face downwards when you do this.
Insert a hose seal 7 into the thread of the connection hose 10 and attach the connection hose 10 by twisting it clockwise onto the lower thread of the diverter 9 (see Figures L and M).
Insert a hose seal into the other end of the connection hose and screw this tightly onto your water supply by hand.
Insert a hose seal 7 into the nut of the shower hose 8 and attach this by twisting it clockwise onto the side thread of the diverter 9 (see Figures N and O). - Attach a hose seal 7 to the other end of the shower hose 8. Then connect the handheld shower head 6 to the shower hose 8 by tightening it by hand in a clockwise direction (see Fig. P).
Now remove the union nut 2 on the overhead shower head 5 by twisting it counterclockwise (see Fig. Q).
Insert a seal 3 into the thread on the ball joint 4.
Insert the ball joint 4 into the union nut 2 from below (see Fig. R).
Insert the seal 3 into the overhead shower head 5 and screw the ball joint 4 together with the union nut 2 clockwise onto the overhead shower head 5 (see Figures S and T). - Attach the overhead shower head 5 by twisting it clockwise onto the shower bar 1 (see Fig. U).
Use
You can use the diverter to switch between the overhead shower head and the handheld shower head.
The angle of the overhead shower head can be adjusted by the user.
You can choose between 5 jet settings for the handheld shower head [6]:
Normal
- Normal-soft
- Soft
- Normal-Massage
- Massage
- Cleaning and care
Never clean with petrol, solvents or aggressive cleaners or hard bristled brushes, etc. These could damage the product's surface.
Ensure the hoses do not come into contract with caustic or corrosive agents, such as cleaning agents or household detergents. This could result in water damage.
- Never clean coloured surfaces with scouring or corrosive cleaners, or cleaners containing alcohol.
Clean the product with a damp, soft cloth or chamois.
Failure to observe the above care advice can be expected to result in damage to the surfaces of the product. This will inevitably invalidate the warranty.
- Maintenance
Regularly check all connections and joints for leaks or visible damage.
If there are any leaks or visible damages to the shower set or hoses, these should be checked or replaced by a professional immediately.
Disassembly
Shut off the water supply before disassembling the product.
Watch for residual water draining from the product.
Disassemble the product in the reverse order specified in the installation instructions.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
Information
- Checking if tap water is drinkable
Ask your local authorities whether the water in your town/municipality is drinkable.
In general, the following recommendations apply for the potability of tap water:
- Let the water run freely for a short time if it has been stagnating in the pipework for more than four hours. Do not use any of this stagnant water in the preparation of food or for drinking, particularly if this is being used to feed babies or infants. Health concerns may otherwise arise. Fresh water can be readily distinguished from stagnant water as fresh water is noticeably cooler as it leaves the pipe.
- Do not use stagnant water from chromium-plated pipework for the preparation of food or drink or for personal hygiene if you are allergic to nickel. This water may contain high quantities of nickel and trigger an allergic reaction.
- Do not use water from lead pipework for preparing baby food and/or to prepare foods during pregnancy. Lead dissolves in drinking water and is particularly damaging to the health of babies and young children.
Warranty and service
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal
rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.
Customer service
Call charges are dependent on the
land-line tariff of your phone provider)
Tel.: +800 34 99 67 53 (from abroad)
Please have your receipt and the item number (IAN 385269_2107) ready as your proof of purchase when enquiring about your product.
PRENEZ GARDE AU RISQUE
D'ÉLECTROCUTION! Avant de
pribl. 150cm