PARTYBTHPS - Speaker BIGBEN - Free user manual and instructions

USER MANUAL PARTYBTHPS BIGBEN

• Take the device out of the box.

• Remove all the packaging from the product.

• Place the packaging inside the box or dispose of it safely in compliance with the wa󰘵e sorting in󰘵ructions shown on the outside. Safety warning and notice You mu󰘵 read and under󰘵and all the in󰘵ructions before using this device. The warranty will not apply if damage is caused by failure to follow the in󰘵ructions.

1. Never remove the device casing.

2. Never place this device on top of other electrical equipment.

3. Protect the power cord from being 󰘵epped on or pinched, particularly at the

plugs, sockets, and the point where it exits the device. Make sure that the power rating corresponds to the voltage shown on the rating plate at the rear of the device. Always pull the plug from the socket when disconnecting from the mains. Never pull on the cord. Ensure you have completed all the other connections before connecting the mains plug.

4. Only use attachments/accessories that are recommended by the

5. Entru󰘵 all device repairs to quali󰘰ed repairers. Repair is needed when the

device has been damaged in any fashion, and in particular: - if the power cord is damaged; - in the event of a liquid spill or objects being inserted into the device; - if the device is exposed to rain or dampness; - if the device does not operate normally; - or if the device has been dropped or impacted.

6. The series panel is located on the bottom of the device.

7. Never block the air vents.

8. Make sure you have enough space for ventilation. Place the product on a 󰘵able surface.

9. This device mu󰘵 be used in a moderate climate, away from direct sunlight, naked 󰘱ames

or sources of heat, heaters, cookers or any other devices (including ampli󰘰ers) that generate heat. Do not in󰘵all near a heat source.

10. The batteries (battery pack or inserted batteries) mu󰘵 not be exposed to excessive heat,

such as sunshine, 󰘰re, etc.

11. Always unplug the device before cleaning it. Never lubricate any part of this device. Clean

Getting started 10 Safety warning and notice 10 Contents of the box 12 Device introduction 12 Charging 14 Bluetooth connection 14 Pairing function 14 Device technical specications 14 Environmental protection 15 Additional information 15 Declaration of conformity 15 Warranty 15- EN 11 - it with a soft cloth. Do not use abrasive products or harsh cleaners.

12. Ensure that you always have easy access to the power cord, plug or adapter to disconnect

this device from the mains if necessary.

13. Do not use this device near water. It mu󰘵 not be dripped on or splashed. Do not use this

device in a damp or wet environment.

14. Disconnect this device in the event of a 󰘵orm, or if you intend not to use it for a long

15. This device can be used by children aged 8 and over, and by persons with a physical or

sensory disability, learning di󰘲culties or a lack of experience and knowledge, provided they are supervised or have received in󰘵ructions on the safe use of the device, and they under󰘵and the risks involved. Children mu󰘵 not play with the device or the power cord (risk of 󰘵rangulation). Children mu󰘵 not clean or maintain the device without supervision.

16. This device mu󰘵 only be supplied with very low safety voltage as indicated on the device.

17. The battery should be removed from the device before disposal. The device mu󰘵 be

disconnected from the power supply when removing the battery.

18. When in operation, the device mu󰘵 be at a minimum di󰘵ance of 20 cm from the human

19. This device is for household use only; do not use outdoors.

The lightning bolt symbol within an equilateral triangle alerts users to the presence of dangerous uninsulated voltages, inside the device, that may present a risk of electric shock. The exclamation mark inside a triangle indicates the presence of important operating and maintenance (repair) in󰘵ructions in the literature accompanying the device. Risk of 󰘰re or explosion if the battery is replaced by an incorrect type. Disposal of a battery into 󰘰re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of 󰘱ammable liquid or gas; A battery subjected to extremely low air pressure that may result in an explosion or the leakage of 󰘱ammable liquid or gas. Maximum operating ambient temperature of the product is 25℃ Please refer the information on exterior bottom enclosure for electrical and safety information before in󰘵alling or operating the apparatus.- EN 12 - Direct current Class II material Alternating current For indoor use only Contents of the box

The power button is located at the top of the speaker. Slide to ON position to turn on.- EN 13 -

Charging port. Use a USB-C charging cable to connect your speaker to a 5 V-1 A power source (mains adapter, computer, etc.).

Lets you play music tracks 󰘵ored on the memory card. The speaker is compatible with the following 󰘰le formats: MP3/WAV/APE/WMA. The maximum size of the USB media for MP3 playback mu󰘵 not exceed 32 GB.

Lets you play music tracks 󰘵ored on the USB card. The speaker is compatible with the following 󰘰le formats: MP3/WAV/APE/WMA. The maximum size of the USB media for MP3 playback mu󰘵 not exceed 32 GB.

Connection for a 6.35 mm external microphone (not included).

Press brie󰘱y to scroll through the di󰘯erent lighting e󰘯ects or turn them o󰘯.

Press the < button to decrease the volume and return to the previous track via Bluetooth, SD and USB. In Bluetooth / Micro-SD / USB mode, press brie󰘱y to go back to the previous track. Press and hold to decrease the volume.

9. Play/Pause button

Play/pause button for Bluetooth, Micro-SD and USB playback. In Bluetooth / Micro-SD / USB mode, press brie󰘱y to play or pause the track.

Press the > button to increase the volume and skip to the next track in Bluetooth, Micro-SD and USB mode. In Bluetooth / Micro-SD / USB mode, press brie󰘱y to skip to the next track. Press and hold the button to increase the volume.

Press the BASS button to choose from 4 di󰘯erent EQ settings.- EN 14 - Charging: When you hear the low battery warning beep, you should switch o󰘯 the speaker and recharge it. Connect the USB-C cable to the charging port on top of the speaker. During charging, the LED indicator turns red. The charging LED light switches o󰘯 when charging is complete. A full charge can take 5 to 6 hours depending on the USB power source. Bluetooth connection: When the speaker is turned on, the speaker automatically switches to Bluetooth search mode. Look for and select "PARTYBTHPS2" on your mobile device. Once found, a beep will sound to indicate that the speaker is connected to the device. Pairing function You can only do this if there are two PARTYBTHPS2.

1. Switch on the two speakers and put them into Bluetooth mode.

2. Hold down the Play/Pause button on one of the speakers for 3 seconds. Release the

button when you hear a beep. Both speakers are now connected.

3. Then, switch on your phone's Bluetooth and look for PARTYBTHPS2, then pair with the

speaker and connect to play your music through it.

4. In pairing mode, press and hold the Play/Pause button to disconnect the pairing.

Device technical specifications Audio power 10 W Built-in battery 3.7 V 1,800 mAh Unit 3’’ X1 Frequency response 80Hz - 18 kHz Bluetooth version 5.3 Dimensions 145 x 138 x 190 mm EIRP 0.9 dBm N.B.: The maximum connection di󰘵ance is approximately 10 metres. Place your Bluetooth speaker as close as possible to the device to avoid any interference with the connection. The device may turn o󰓐 in an environment with electro󰄋atic discharge. The user mu󰄋 then recharge the battery and reset the device.- EN 15 - Environmental protection Your product has been designed and manufactured using high-quality materials and components that can be recycled and reused. Attention should be drawn to the environmental aspects of battery disposal. When the crossed-out wheelie bin symbol appears on a product, it means that the product is covered by European Directive 2002/96/EC. Please 󰘰nd out about the local sorting and collection sy󰘵em for electrical and electronic products. Please act according to local rules and do not dispose of your old products in your household wa󰘵e. By ensuring this product is disposed of correctly, you are helping to prevent potentially negative consequences for the environment and human health. Additional information

, the brand and logo are regi󰘵ered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Bigben Interactive is under licence. All other brands and trade names are the property of their respective owners.

• This product is manufactured and sold under the responsibility of Bigben Interactive.

• All other products, services, corporate names, trademarks, trade names, and logos referenced herein are the property of their respective owners. Declaration of conformity

• Bigben Interactive declares that the PARTYBTHPS2 radio device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.bigben-interactive.co.uk/support/ Warranty This product is guaranteed by Bigben for a period of 2 years from the date of purchase, except in countries of the European Economic Area, which o󰘯er a longer warranty period. We recommend that you keep your receipt for any claims. The warranty covers breakdowns due to defective material, a missing element or manufacturing defect. In this case, contact our technical support. For any problem with a defective product, contact your point of purchase with your receipt. The warranty does not cover problems of improper use.- EN 16 - Support www.bigben-interactive.co.uk/support [e-mail] Made in China Manufactured by BIGBEN INTERACTIVE SA 396, Rue de la Voyette CRT2 – FRETIN CS 90414 59814 LESQUIN Cedex - France www.bigben.eu

This product can be recycled TO DROP