AGM1117P - Grinder Ferm - Free user manual and instructions

USER MANUAL AGM1117P Ferm

Thank you for buying this FERM product. By doing so you now have an excellent product, delivered by one of Europe's leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety

warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observation of the instructions in this manual.

Risk of electric shock

Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.

Risk of flying objects. Keep bystanders away from the work area.

Always wear eye protection!

Wear hearing protection.

Wear safety gloves.

Do not press the spindle lock button while the motor is running.

Risk of fire.

Do not dispose of the product in unsuitable containers.

The product is in accordance with the applicable safety standards in the European directives.

SafetyWarnings Common for Grinding or Abrasive Cutting-Off Operations:

a) This power tool is intended to function as a grinder tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
b) Operations such as sanding, wire brushing, polishing are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.
c) Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.

e) The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
f) Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
9) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time.
h) Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.

j) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
1) Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.
n) Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
o) Do not operate the power tool near flammable materials. Sparks could ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

Kickback and RelatedWarnings

Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at the point of the binding.

For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump toward or away from the operator, depending on

direction of the wheel's movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.

a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken.
b) Never place your hand near the rotating accessory. Accessory may kickback over your hand.
c) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel's movement at the point of snagging.
d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control.

SafetyWarnings Specific for Grinding and Abrasive Cutting-Off Operations:

a) Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel. Wheels for which the power tool was not designed cannot be adequately guarded and are unsafe.
b) The grinding surface of centre depressed wheels must be mounted below the plane of the guard lip. An improperly mounted wheel that projects through the plane of the guard lip cannot be adequately protected.
c) The guard must be securely attached to the power tool and positioned for maximum

safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect the operator from broken wheel fragments, accidental contact with wheel and sparks that could ignite clothing.

d) Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.
e) Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may burst.

Additional SafetyWarnings Specific for Abrasive Cutting-Off Operations:

Cut-off operations are only suitable with a special protection guard (not included) fig. C2 - D2

a) Do not "jam" the cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
b) Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop.

Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.

d) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.
e) Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

Electrical safety

When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Always check that the voltage of the power supply corresponds to the voltage on the rating plate label.

Class II machine - Double insulation - You don't need any earthed plug.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

2. MACHINE INFORMATION

Intended use

Your angle grinder has been designed for grinding masonry and steel materials without the use of water. For cutting, a special protection guard must be used (not included) Fig. D2.

Technical specifications

	AGM1117P AGM1119P
Mains voltage 220-240 V~
Mains frequency 50/60 Hz
Power input 2600W
Rated speed 8.500 /min 6.500 /min
Wheel disc for grinding
Diameter 180 mm 230 mm
Bore 22.2 mm
Thickness 6 mm
Wheel disc for cutting
Diameter 180 mm 230 mm
Bore 22.2 mm
Thickness 3 mm
Spindle thread	M14
Weight	6.6 kg	6.7 kg
Sound pressure (LPw)	96.1 + 3 dB(A)
Acoustic power (LwA)	107.1 + 3 dB(A)
Vibration "Surface grinding" aT,AG	7.86 + 1.5 m/s2

Vibration level

The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.

Description

The numbers in the text refer to the diagrams on pages 2-4

Fig. A

1. Spindle lock button
2. Allen screw
3. Protection guard (Fig. D1+D2)
4. Carbon brush cover
5. On/Off switch
6. Side handle connection point
7. Side handle
8. Allen key

Fig. B

1. Spindle
2. Mounting flange
   10.Wheel disc (not included)
3. Clamping nut
4. Spanner

Fig.C1 & D1

Protection guard for grinding

Fig.C2&D2

Protection guard for cutting (not included)

Fig. G

1. Screw
2. Spring
3. Carbon brush
4. Brush wire

Assembly

Before assembly, always switch off the machine and remove the mains plug from the mains.

Assembling the protection guard (Fig. C and D)

• Place the machine on a table with the spindle (8) facing upwards.

• Place the protection guard (3) over the machine head as shown in Figure C making sure the ridges on the protection guard fall into the notches of the machine head.

• Turn the protection guard counter clockwise as shown in Figure D
  Fix the the allen screw (2) on the guard with the allen key (18)

• You can adjust the position of the protection guard by releasing the allen screw (2), adjust the guard to the desired position and fixing the allen screw again.

Never attempt to remove the guard.

Mounting and removing the disc (Fig. B)

Always use suitable wheel disc for this machine with diameter AGM1117P 180mm / AGM1119P 230mm and a bore from 22.2 mm the thickness of the wheel disc should be 6mm for wheel disc for grinding and 3mm for wheel disc for cutting, the mounting wheel disc may not touch the safety guard.

Mounting

• Place the machine on a table with the protection guard (3) facing upwards.
• Mount the flange (9) onto the spindle (8).
• Place the wheel disc (10) onto the spindle (8).
• Keep the spindle lock button (1) pressed and firmly tighten the clamping nut (11) onto the spindle (8) by using the spanner (12).

Removing

• Place the machine on a table with the protection guard (3) facing upwards.
• Keep the spindle lock button (1) pressed and loosen the clamping nut (11) using the spanner (12).
• Remove the wheel disc (10) from the spindle (8).
• Keep the spindle lock button (1) pressed and firmly tighten the clamping nut (11) using the spanner (12).

Mounting the side handle (Fig. A and B)

• The side handle (7) can be screwed into one of the three side handle connection point (6).

3. OPERATING

Make sure that the work piece is properly supported or fixed and keep the supply cord routing away from the work area.

Switching on and off (Fig. A)

• To switch the machine on, push the switch forward and press the On/off switch (5).
• To switch the machine off, release the On/off switch (5).

Hold the machine away from the work piece when turning it on and off because the wheel disc could damage the work piece.

• Clamp the work piece firmly or use another method to ensure that it cannot move while working.
• Check the discs regularly. Worn wheel discs have a negative effect on the machine's efficiency. Change to a new wheel disc in good time.
  Always first turn the machine off after use before removing the plug from the socket.

Deburring (Fig. E)

An angle of inclination of 30^ to 40^ will give the best results when deburring. Move the machine back and forth using light pressure. This will prevent the work piece from discolouring or becoming too hot and will avoid making groves.

Never use abrasive cutting discs for deburring work!

Cutting (Fig. F)

For cutting, a special closed protection guard (Fig. D2) must be used (not included).

Maintain firm contact with the work piece to prevent vibration and do not tilt or apply pressure and when cutting. Use moderate pressure when working, appropriate to the material that is being worked on. Do not slow down wheel discs by applying sideways counter pressure. The direction in which you want to cut is important.

The machine must always work against the direction of the cut; so never move the machine in the other direction! There is the risk that the machine will catch in the cut causing kickback and that you will lose control.

Hints for optimum use

• Clamp the work piece. Use a clamping device for small work pieces.
• Hold the machine with both hands.
• Switch on the machine.
• Wait until the machine has reached full speed.
• Place the wheel disc on the work piece.
• Slowly move the machine along the work piece, firmly pressing the wheel disc against the work piece.
• Do not apply too much pressure on the machine. Let the machine do the work.
• Switch off the machine and wait for the machine to come to a complete standstill before putting the machine down.

4. MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

Replace power cords

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Mains plug replacement (UK only)

If the moulded 3-pin plug attached to the unit is damaged and needs replacing, it is important that it is correctly destroyed and replaced by an approved BS 1363/13A fused plug and that the following wiring instructions are followed. The wires in the mains cable are coloured in accordance with the following code:

• blue neutral
  brown live

As the colours of the wires in the mains cable of the unit may not correspond to the coloured markings identifying the terminals in the plug, proceed as follows:

• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

Checking and replacing the carbon brushes (Fig. A & G)

If the carbon brushes are worn, the carbon brushes must be replaced by the customer service department of the manufacturer or a similarly qualified person.

Only use the correct orginial type of carbon brushes.

• Remove the carbon brush covers (4) by untightening the screw, open the cover by lifting it out of the machine.
• Release the spring (14) from the carbon brush and hold the spring (14) by a screwdriver. Remove the carbon brush (15) from its holder (keep the copper wire (16) attached to the machine).
  While holding the spring (14), place the new carbon brush inside the holder.
• Release the spring (14) back into place making sure it holds the brush (as shown in Fig. G).
• Disconnect the copper wire of the old carbon brush and connect the new one. Make sure the wire does not get jammed.
• Place the cover (4) back into place, make sure no wiring gets jammed and tighten the screw.
  Always make sure to replace both carbon brushes at the same time.
  After mounting the new carbon brushes, let the machine run at no load for 15 minutes.

WARRANTY

The warranty conditions can be found on the separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

The product and the user manual are subject to change. Specifications can be changed without further notice.

Winkelschleifer

AGM1117P 2600W - 180MM

AGM1119P 2600W - 230MM

2 INFORMATIONS RELATIVES A LA MACHINE

Utilisation prévue.

Specifications techniques

2. INFORMACE O NARADI

Určené použití

Vase uhlova bruska je urcena pro brouseni stavebnich a ocelovych materialu bez pouziti vody. Provadite-li rezani, musite pouzit specialni ochranny kryt (neni dodavan) obr. D2.

Technické udaje

MaunHa Klaac II - BoHn Ha n3oJaun - Hmate Hyjda Ot 3a3emeh ukeep.

Ako e HeBb3MOxHO da n3noJ3BaTe
eJeKtpnueckn INCTpyMeHT Ha BnaXHo
MRCTO, n3noJ3BaIte 3aunTeHO 3axpaHbaHe
c yCtpoiCTBO 3a ocTaTbueh Tok (RCD).
N3noJ3BaHeTo Ha RCD hAmajraBa pUCKa OT
TOKOB yIap.

2. INHΦOPMAÇNЯ 3A MAUINH

PpeHa3NaueHne

BaunrT bILOJMaJe e npedHa3NaYeH 3a
UnaFaHe Ha 3ndapnN CTOMaHEn MaTePnA
6e3 n3noJI3BaHe Ha BODa. 3a p3aHe Tpr6Ba da
ce n3NoJI3Ba CneuHa 3aHTHa 3aNTa (He e
BkIOueHa BV KOMIIKeKTA) H D2.

Texnueckcn cneuФнkaun

CnH HeyTpapaneH
·KaFyB KINB

TbI KaTO UBeToBte Ha XnUITE B MpeXOBnKa6eHa yCTpOYCTBOTO MOKe Da HeCbOTBeTCTBaT Ha UBeTHNTE MapKnpOBKn,INDeHTnΦuPauSi KJEMTe B UeKepa,Ha npaBeTe CJeHOTo:

CunhaT, KOTo e ouBeTeH B CnHbO, Tp6Ba da 6bJe CBbp3aH KbM TepMHaHa, KOTo e 03NaueH c 6yKBaTa N nn e ouBeTeH B cepHo.
Ka6eBbT, KoITo e oCbTeH B KaΦaBO, TpI6Ba Da 6bJe cBbP3aH KbM TepMnHaJa, KoITo e MapKupah C 6yKBaTa L nnn e oCbTeH B cepBeHo.

PpOBepKaTa NIOmHaHa Ta Ha BbIepoHnTe YETKN (fynypn A n G)

Ako ce HocrBbIepoHn YeTKN, BbIepoHnTe YeTKN Tp6Ba Da 6bDat 3aMeHeH NT OT OTeJa 3a 06cnykBaHe Ha KIneHTn Ha npOn3BoDnteJIy IIN eKBuBAleHTHO KBaIIuΦnUpaHo Nlue.

N3noJ3BaIte cAmO npaBnHnTnOpunHaHNn BByIepoHn YetKn.

CbaTe KaNaUknte Ha YeTkata (4), KaTo pa3TeHHeTe BNHTa, OTBOpTe KaNaka, KaTO rO 3BaNTe OT MaUnHaTa.

Ocbo6oTe npxHnHaT (14) ot BbIepoHaTa qeTKa n 3aIpbXTe npxHnHaT (14)cOTBepTKa.I3BaIeTe BbIepoHaTa qeTKa (15) ot Ibpxkau N (3ana3eMeMnna npoBnK (16), npNKpeen KbM MaunHaT).
-Дokato Дьркитepухинata（14)，notabete HOBATA BvrgelopnHa YetKa BvTpBeВьрkaça.
Ocbo6oTe npyXnHaTa (14) Ha MrcToTO cn, KaTO ce yBepnte, Ye DbpxN YetKaTa (KaKTo e noka3aHo Ha qnr. G).
- I3KJIIOUcTe MeHnI npOBoHNk Ha CtapaTa BbIpeOHa YETKa N CBbPxKeTe HOBaTa. YBepTe Ce, Ye Ka6eNbT He e 3aceHaN.
- NocTaBeTe Kanaka (4) obpaTHo Ha MrcTo, yBepete ce, ye He ce 6Iokupa OKa6eJraBaHeTo n 3aTeHete BuHTa.
Bunaru ce yBepaBaiTe, ye n DBeTe BByIepoHn YeTKn ca NpOMeHeHn eHOBpeMeHHO.
CneI KaTo MOHTnpaTe HOBnTe BByrJepoHn YETKn, OCTaBeTe MaunHaTa Ja pa6Otn 6e3 TOBap B npOdbLnKeHne Ha 15 MNHyTN.

TAPAHLJIY

TapaHcHOnHnTe yCNoBnMa rAt Da 6bDaT HamepeHn Ha OTdJIHo npUkpeHeHaTa rapaHcNOnHn KaPa.

3AOBnKAJIaCPEDA

Heu3npaBHnTe n / u nn 3XbBpIeHnTe eJIeKTPnueckn u nn eJIeKtpoHHu yCTPOiNCBa Tp8Ba da ce cb6nPaT ha cBoTBeTHnTe MeCt a 3a peuNKnPahe.

Camo 3a cTpaHnTe ot EO

He n3xBbpyIte eIeKtpOnHcTpymeHTnte B 6ntobn otnaBc. CbrnacHO Ebponeckata hacoka 2012/19 / EC 3a otnaBcnte ot eIeKtpueecko n eIeKtpoHn O o6OpyDbahe N HeHOTnpnilarahe B HauNoHaHnO To paBO eIeKtpueeCKNTe NHCTpymeHTN, KOUTo BeYe He MoarT da ce n3noJ3BaT, Tpr6Ba da ce c6bupa T OTdeJHo N da ce n3XbPnT no ekolorocbo6pa3EH NaHH.

PpOdykTBn pBkoBDCTBOTo 3a yNOTpe6a noJExKAT Ha npOMHa. CneuNfUkaUNTe MORaT da ce npOMEHrT 6e3 DObHHTeJIHO yBeDOMBaHe.

yIIOBAI JINHMAUNHA

AGM1117P 2600BT - 180MM

AGM1119P 2600BT - 230MM

Bnaoradapm 3a npno6peTHe npoDyKta Ferm. Tepeb y Bac eCTb npOdyKT OTnUHOro KaueCTBa OT Ondoro n3 JyUxN IOCTabUzIKOB EbpOnbl. Bcra npOdykunia KOMnAHnFerm npOn3BOuNTcB B COOTBeTCTBn C HAnBBicUHMn CTaHApTaMn npOn3BOuNTeJIbHOCTn I 6e3ONaCHOCtN. POnHTnKa HaWei KOMnAHn TAKKe BKnHouaET ppeBOxCoJHOe 06CnyKBAHne KIneHTOB nONHyrapaHTIO. Mbl Naedeemc, YTO 3OT npOdyKT npocnyKrt Bam MHOrne roDbI.

1. INHCTPYKUNI NO TEXHINKE BE3OJNACHOCTN

OCTOPOXHO

BHHMaTeJIbHo npOuTyTe

npdeynpeKdEHHo co6nOeHH

TexHnKb 6e3oNaChOCTn,doONHHTeJIbHbIe
npedynpeJxdeHnOco6JIIODeHnTexHKn
6e3oNaChocTn n HNcTpkyuH. HecobJeHne
npedynpeJxdeHn O co6JIIODeHn TexHKn
6e3oNaChocTn n HNcTpkyuKm MOKeT npVBecTn
K npopaxHeHIO 3JIeKtpUYeCKM TOKOM,poXapy
n/nn cepBe3HbIM TpaBMaM.CoxpaHnte
npedynpeJxdeHn O co6JIIODeHn TexHKn
6e3oNaChocTn n HNcTpkyuKm DJa
daNbHeJwero NcNoJIb3OBaHn.

PnBBeHHe HxKe 3NauchKn nCNoJb3yOTcB DaHHOM pyKOBoDCTBe nn Ha npOdyKTe:

Ppoumme pykooeodcmgo nolb3oameen.

Yka3b6aem Ha puck noepkdeHua UhcmpyMeHma,mpaem unu cmemu e cnyuae HecobnodeHua UhcmpyKuu npueedeHHbx E daHOM pykoobcme noB308amena.

Onachocmb nopaxeHua 3neKmpueeckum mOKOM

B cnyae noepexdeHua Ka6eIa numaHua, a maKxe eo epem ouucmku u mexHuuecko2o 06cnyxuehaunka6JIb numaHua Heo6xodmo omKnIOuumb om po3emku.

Onachocmb nemux ockonkoe.
N3beaume npucymcbu
nocmopohhux habnodameneu 8 30he npoedehenpa6om.

Bceea uonb3yume 3aumhble ouku!

Ib3yume cpecmea 3auumbl om uyma.

Icnonb3yume 3aumHbIe nepuamku.

He haxumaime Ha Khonky 6nokupobku wunhdene BO epempaobbi 3nekmpomomopa.

Onachocmb noxapa.

BbIbpaCbIeAume u3dene moIbko 8 npedHa3NaYeHHbIe dna 3mo20 KOHmeuHepbl.

JaHoe u3denue coombeemcmbyem npumehumbim cmahdapmam 6e3oNaChocmu eeponeueckux dupekmue.

O6uhe npedynpejdeHn o co6IIODeHn TeXnKn 6e3oNaChocTn BO Bpem Oepaun IIO 3aTaUHaHNo IIN OTpe3aHIO C NcPONb3OBaHneM a6pa3NBbIX MaTePnaJIOB:

a)ДаHHьзлкгронсгрмentпpeДNoJIaraeTcЯИСNoIb3OВaТьВКаYeCTBeWnФOBaHbHOМaunHbI.ПpoTNTeBceпpeDynpexKdEHЯ NO6e3OnacHOMYNCNoJIb3OBAHnIO N O3HaKOMbTeCbC pncyHKamN cneuФнkaцЯMKNOTOpBIE npINarAOITcK DaHHomY3JIeKgPONHcTpyMeHTy.HecobIoDeHne

PnBBeDeHHbIX HNKe INHCTpyKcM MoKeT PnBecTN K NopaxKeHN OJIeKTPuYeCKM TOKOM, NOXapy N/INN cepbe3HbIM TpaBMam.

b) He pekomeHdyeTc nCNoB3OBA Tb daHHbI 3NeKTPoHnCTpyMeHT dJa TaNX Oepaun, KaK WnFOBka, OvnCTKa npBOJOnHOH 8eTKoN nONIpOBKa. BblonHeHne onepaun, dJa KOTOpbIX 3NeKTPoHnCTpyMeHT He npedHa3NaueH, MoKeT ppeCTabJIaTb ONaCHOCTb IN PpNBecTI K cepbe3HbIM TpaBMam.
c) 3anpeuaetcnaonb3oBaTb npHaJnEJXHocTn, KOToPbIe He 6bln cneunalbHO pa3pa6OtaHbI n 3apeKOMeHIOBaHbI npOn3BOUntTeJe m HcTpymeHTa. DaKe ecnn npHaJnEJXHocTb MOKeT 6bltB npNKpePnHeKa 3JIeKTPoINHCTpymeHTy, 3TO He O3HaayeT, 4TO ee NCNoJIb3OBAHHe 6e3OnaCHO.
d) HOMHaJIbHЯ cKOpOCTb npHaIaJIeXHoCTn DOJxHa 6bITb paBHa IIN npeBbIaTa b MaKcImaJIbHyIO cKOpOCTb, 06o3HaueHHyHO Ha 3JIeKTPoHnCtpyMeHTe. PpHaIaJIeXHoCTn, pa6OtaUQne CBepx CBOeHOMHaJIbHOI cKOpOCTn, MOrY T cIOMaTbcr I pa3NeTeTbcr.
e) BHeuHnI dHaMeTp nToJUINHa npHaIeXHoCTn DOJXHbI HaxOHTbcB B ppeJnx pa6oeryo Dnaana30Ha 3JeKtpoHnCtpymEnTa. PpN IcNoJIb3OBaHIn npHaIeXHoCTe HBebpHorO pa3Mepa HeBO3MOxHO rapaHTnpoBaTb 6e3OnaCHOCTb N yPpABJIeMoCTb pa6Otbl.
f) Pe3b6oBoe 3aKpeHneHne npHaJnxHoCTeI dOJIxHO COOTBcTcBOBaTb pe3b6e WnHdEJIa WnHpaunHbI. Ia npHaJdxHoCTeI, KOtOpBIE KpeNATc Ha fPhaHuaX, OTBepCTHe npHaJdxHoCTu DOJXHO CoBnaDaTb C dHaMeTpOM pHaJdxHoCTU, KOtOpBIE HE COOTBcTcByOT aJeMeHTAM KpeHHeN 3JIeKTpOHnHCTpyMeHtA, npNBeDyT K DnC6aJaHCy, NOBbIeHHbIM Bn6paunM m MOrTy nPnBeCTN K Notepe ynpaBHeHn.

g) 3anpeueho nCnONb3OBaTb NOBpeXeHHbIe npHnAdLeXHoCTn! Npeed kaxdbim nCNoB3OBaHHeM npOBepaTe npHnAdLeXHoCTn, TaKne KaK abpa3NBbIe DnCKn, Ha npEdMeT cKOJOB u TpeuH, DnCKn-NOoWbI Ha npEdMeT TpeuH, pa3pbIBOB, N3LIuHHeRo N3HOca, npOBOLOUHbIe UeTKn Ha npEdMeT ocna6leHno Hnn CnOMaHHo NpOBOLOKn. B Cnyae NaDeHnra 3NeKtpOnHcTpymEHTa nn npHnAdLeXHoCTn, npOBepbTe HHCTpyMeHT N pRnHaADLeXHoCTb Ha npEdMeT NOBpeXeHHn Hnn yCTaHOBHTe HOByo npHnAdLeXHoCTb. Nocle npOBepKn u YCTaHOBKn npHnAdLeXHoCTn paCnOLOXHTecb TaKm O6pa3OM, YTO6bl Ha NlOCKoCTN BpaSeHHn npHnAdLeXHoCTn He HaxODINncb IIOdN, 3aTeM 3aNyCTNTe 3JIeKTPOnHcTpymEHT Ha MaKcImaJIbHOJ CKOpOCTNs Be3 Harpy3Kn N IO3BOJbTe HHCTpyMeHTy pa60TaTB B TakOM peXmme B TeueHne OndHmMHytbl. O6bIHyO 3a 3TO Bpemr NOBpeXeHHbIe npHnAdLeXHoCTN JOMaOTc.

h) NcnoIb3yIte cpeCTBa HndINBnDyaIbHOJ 3aunTbI. B 3aBNCIMOCtN OT npImeHHeH, NcnoIb3yIte IInCeBOJ uNTOK, npedoxpaHnteBhIe OCKn IIN 3aunTHbIE ockn. B 3aBNCIMOCtN OT cnTyauu TAKKe NcnoIb3yIte nbIe3aunTHyo Macky, cpeCTBO 3aunTbI cLyxa, 3aunTHbIE nepaATKn I 3aunTHbI φapTyk, CNocO6HbI OCTaHaBnBaTb MeKne abpa3NBbIe qactNuBi. 3aunTa IINr IINZHa IMeTb BO3MOXHOCTb OCTaHaBnBaTb pa3NeTaIOUneC8 BO BpeM Pa3NHyBX pa6OuX Onepaui OckoKN. PbIe3aUnTHa Macka INI peCnnpaTOP DOJIKHbI IMeTb BO3MOXHOCTb FInlbTpauu YAcTNU, OKa3ABWnxC8 B Bo3dyXe B Xode pa6Oey Oepaui. PpOOnKHTeJIbHbI Wym BlicOKOINHTEHCBHOCTm MOKET pINBeCTN K NOBpeXdHnIO n Notepe Cnyxa.
i) CneIte 3a TeM, YTO6bI NOCTOPOHHe Ha6JIIOJaTeHn HaxOJINncb Ha 6e3OnacHom paCCToHnn OT 30HbI NPOBeDeHn pa6OT. Bce Iuca, HaxOJaUncsEcB 3oHe npOBeDEHn pa6OT, DOJXHbI NcNoJb3OBaTb cpeCTBa INDINbYaJIbHOH 3aUNtbl. OckOJIKN pa6OuNX MaTePnaNoB, a TaKKe

OCKOJKN pa36ntbIX npHnAdIeXHoCTeM MOryT BblTeTb 3a npedeJIbI pa6oey 30HbI HAnHeCTN yBeeBy NOCTOPOHIM IIncAm.

j) Bo Bpem BaIOnHeHn pa6OuHX onepaun, rde cyueCTByeT BO3MOxHOCTb cOpNKoCHOBeHn npHaIeXHOCTn COCKpbIToN 3JeKTPoPBOJKO Hn Ka6eJeM nHTAHn H3DeJIInr, 3JeKTPoHnCTpyMeHT Heo6xOJIMO DepxaTb TOnbKO 3a H3OIIPOBAHHbIe NOBepxHOCTn pyKOrTOK. B cnuyae ecnn pexyUee npncnoc6JIeHne cOpNKoCHETcC Ka6eJeM IOd TOKOM, MeTaIINuCeCKNe DeTaII N 3JeKTPoHnCTpyMeHTa TaKke 6ydyT HaxOJTbcra IOd TOKOM, I, KaK CJIeDCTBnE, MOYr Iopa3ITb OpepaTopa 3JIeKTPuYeCKIM TOKOM.
k) PacnoJoxTe Ka6eIb noJaIbWe ot BpaauoIeCn npHaIaJIeXHocTn. B cIyae yTeRn KOHTpOJIa HAD 3JIeKTPoINHCTpyMeHToM DnCK MoKET pa3pe3aTb IpoBOd nII 3aUeNITbc, NotaHyB pyky B CTOpOHy BpaauoIeOcR npncnocO6IeHn.
I) He KnaDInTe 3NeKTPoHnHCTpyMeHT Ha non Do Tex nop, noka npHaJnEJXHOCTb He OCTaHOBnTcdo KOHua. BpauaIOUaCra npHaJnEJXHOCTb MOKeT 3aueNtbcr 3a NOBepxHOCTb N BblpBaTb 3NeKTPoHnHCTpyMeHT n3 pyK.
m) He HOCHTe 3JIeKTPOHNcTpymENT BO BKNIOUeHOM COCTOHN Ha peMHe NHCtpyMeHToB. BpauaIouaCn PpHaADJeKHOCTb MOKeT 3aueNTbcr 3a ODeXdy INOTAHyTB 3JIeKTPOHNcTpymENT K Baewemy TeNy.
n) BeHTnIaOnHHbIe OTBepCTnIa 3JIeKTPoHcTpymEHTa Heo6XoIMOppeyIpaTbI BeHTnIaTOp 3JIeKTPoDvBraTeIa BCacbIBaETnbIb B KopNc 3JIeKTPoHcTpymEHTa,a N3NIuHHee HAKoPJIeHne IopoUkOBOrO MeTaNb IBn3DeHN Co3Daet 3JIeKTPuCheckyU yrpo3y.
o) He nCnoB3yIte HnCTpyMeHT B6JIn3n IerKOBocPnaMeHAnxxCa MaTePnaNoB. NcKpbI MOrTy npUBeCTN K INX BO3rOpaHHO.

p) He nCnoJb3yIe npHaadJeXHoCTn,ДЯ KOTOpbIX Heo6xOaIMo XnKoe OxJaXeHne. IcNoJIb3OBAHHe BObl nPooyx OxJaXaIoUx XnKoCTe MoKeT npuBecTn K nopaxeHIO 3JIeKTPuYeCKIM TOKOM.

OTdau nCBra3aHbIe c Hei npedypeKdEHNr

OTdaua-3TOpe3yIbTaT3aueJIeHnIy
3aCTpeBaHnBpaAuaUeOcR DaNCKa,
DnCKa-NoOnuBbl, UeTKn N IIO6oI pyroI
PpHaNDLeXHoCTn. 3AcTepeBaHne n 3axHMaHne
PpIBoNT K 6bICTPOJ octAHOBKe BpaAuaOeCra
PpHaNDLeXHoCTn, B pe3yIbTaTe Yero NotepaBwH
YnpaBHeHne 3NeKTPOINHCTpyMeHT BblpBaETcRA
B CTOpOHy, PpOTNBONOJoxHyO BpaUeHIO
BpAuaOSeIcra PpHaNDLeXHoCTn B MeCTe
COeDInHeHnI.

Hanpimep,ecn a6pa3nBhI dnc 3aueHTcnn 6ydet 3aueMneH pa6oum MaTePnaIOM, KpaI dNcKa, KOtOpbI BXODIT B TOUYK3axIMMa, MoKeT Bpe3aTbC8 B NOBepXHOCTb MaTePnAHa, YTO npVBedET K BblpBaHNIO NN OTDaYe 3NeKTPOINHCTpyMeHTa. Nsck MOKeT OTnpBIRHyTB KaB CTOPOHY ONePaTopa, TaK I OT Hero, B 3aBNCIMOCTN OT HApRaBHeHn ABnKeHn DaNcKa B MOMENT 3aUeMNEHn. B TAKNX yCNOBnX abPa3NBbIe DnCKI TAKKe MOnrT cNoMaTbCn. OTdaua -3TO pe3yIbTat HeBepHOrO obpaSeHn 3NeKTPOINHCTpyMeHTa n/Inn Heco6nIoHeHn HaDnEkaunx ycNoBn INn pnoceDyp, KOtOporo MoKHO n36ExKaTb, ecn oBeCeuHTb Co6nIOHeHne npVBedEHbIX HNKe MEP npeoocToPOXHOCTn.

a) IpoUHO yIepKINBaIte 3JIeKTPoHnCTpyMeHT n pacNoIoxNte TeIO n pyKy TaKIM o6pa3OM, YTO6bl IMeTb BO3MOXHOCTb IPOTNBOcTOrTb cIne OTdauH. B cIeJx OBeCneJeHn MaKcImaJIbHOro KOHTpOJa NaD OTdaYe, a TaKKe BO BpeM peAKTINBHOrO MOMeHTa B XOde 3anycka BCerDa NcNoJb3yIte DOONHITeJIbHyO pyKoAryk, ecn OHa BXODNT B KOMIIKeT. Pn CO6JIuDeHn Heo6XoIMbIX MEP IpeIoCTOpOXHOCTn ONepaTOP ImeET BO3MOXHOCTb COBlaJaTaB C peAKTINBHbIM MOMENTOM n OTdaYe.
b) HnkOrda He nomeaTe pyky B HnocpeCTBeHHoB 6n3OCTn OT Bpaauouec npHaJnxHocTn. B pe3yIbTaTe OTdauN npHaJnxHocTb MoKeT OTCKOHTb CTOPOHy Baew pykn.

c) PacnojaraTe CBOe TeJTo TAKm 06pa3OM, 7TO6bIB Cnyuae BO3MOxHOn OTdauN 3JIeKTPoHnCTpyMeHT He DBurAnC B CTOpOHy BaWero TeJa.OTdaua OT6pocNT 3JIeKTPoHnCTpyMeHT B HApBaBneHIn, 06paTHOM HApBaBNeHIno BpaUeHnA DnCKa B MeCTe 3aUeMnEHHa.
d) C ocobHHOOCTopoXHocTbIO OTHOCHTecb K pa6ote B yrgnaX N B6n3N ocTpblx KpaEB. N36eaiTe OTcKoKa 3aueMneHn npHaJnxHocTn. Yrbl, ocTpble Kpaar nI IN OTcKOKu qacto pnpBOaRt K 3aueJIpeHHO BpauOSeCn npHaJnxHocTn I NOTepe ynpabHeHn HaD 3JeKTPOINHCTpyMeHTOM nI IN OTdaue.
e) He yctaHaBnBaIte cenHbIe oTpe3HbIe DnCKn no DepeBy n DnCKOBblc 3y6bJam. TaKne DnCKn qacto npINBOJr K OTdaYe uYTepe KOHTpOJIra Hd 3JIeKTPOINHCtpyMeHToM.

Oco6bIe npedynpekxdenno o co6nIOdeHnTexHNK6e3OnaChocTN BO Bpem Oepaun No 3aTaUNBaHNU IIN OTpe3AHIO C NcNoJb3OBaHHeM a6pa3NBbIX MaTePnaIOB:

a) NcnoJIb3yIte ToJIbKO Te TInbI DnCKOB, KOtOpBle peKOMeHdyOTcI dIra BaWero 3JIeKTPoHHCTpyMeHTa,aTakKe COBMeCTmMbIE C HIMN 3aUHTbIe UNTKn. INCKN, KOTOpBle He IpeDHa3HaueHbI dIra 3JIeKTPoHHCTpyMeHTa,He MOrYT 6bITb HaJNeXkaUIM O6pa3OM 3aUINuEhbl.
b) NOBepxHocTb 7nHPOBaHn7nHPOBaJIbHO Kpyra DOnJXHa HaxOaNTbcNoD NIOCKoCTbIO 3aHTHO 7NTKa. HeBepHo yCTaHOJIeHHbI Kpyr, KOTOpB I BixOaNT 3a NIOCKoCTb 3aHTHO 7NTKa, He MoXeT 6bITb B DOCTaTOHHO Mepe 3aUHcH.
c) 3aunthbim koxyxdojxhen6bItb 3akpenneh TaKIM o6pa3OM, yTO6bI HAnMeHbwaar Yactb dNcKa 6blnHa npabNeHa B cTOpohy onepatopa. 3aunthbim koxyx 3aunuiaet OepaTopo aOCKONOB pa3pyweHHoro dNcKa, HepeDnHaMepeHHoro KacaHna I NCKp, KOToPbIe MOrTy nOdkYe bOdekY.

d)ДиCKN Heo6xOAnMo yCTaHaBnBaTb NCKIIOHTeJIbHO dЯTex ueJe,ДЯ KOTOpbIX OHI npeHa3HaueHbI. HanpIMep, 3aPpeaaetc IINΦOBaTb TOPeBOI CTopoHOI OTpe3HOrO DnCKA. A6pa3NBbIe OTpe3HbIe DiCKN PpeHa3HaueHbI dЯ IINΦOBaHnI nepiΦepneI kpyra, TopceBbIe HArpy3Kn Ha 3TN DiCKN MOrY pInBecTu Knx pa3pyuSeHIO.
e) Bcerda nCnoJb3yIte HenoBpeKdEHHbIe naHcbl DnCKOB HaJIeXaUero pa3Mepa I oMpbl dN BbIbpaHOrO DnCK. PpaBnblHbIE naHcbl DnCKOB NOIdepKbNAOT DnCK, TEM cMa CHIXaPnCK pa3pyeHnA DnCKa. naHcbl OTpe3HbIX DnCKOB MOrY OTJNUaTbcr OT naHcBe WJINFOBaJIbHbIX DnCKOB.
f) He nCnoJb3yIte n3HoWeHHbIe dNcKn c 3JIeKTPoHnCTpyMeHTOB 6OJbWero pa3Mepa. NcKn, npEHa3HaueHHbIe DnIg 3JIeKTPoHnCTpyMeHTOB 6OJbWero pa3Mepa, He npEHa3HaueHbI dNra o6OpOTOB, npEduCMOTpeHHbIX dNra MaIbIX 3JIeKTPoHnCTpyMeHTOB, mOryT pa3pyuHTbcr.

IpeynpejdeHnOco6JIOJeHH TexHKn 6e3oNaChOCTN BO BpeM onepaunnoOTpe3aHnO C NCNoJIb3OBaHNMe a6pa3NBbIX MaTePnaJIOB:

Ompe3HbIpepaombi moxho 6blnoJnMb monbko npu Hauuu 3aumHo2o Koxyxa (He exodum e komnneKmauo) puc.C2-D2

a) He 3aueemnIte n He npmeHnTe n3nnHIOHO harpy3ky Ha dinck. He nbItaTecb cniloN yBeHHuHTb rny6nHy pe3Kn. H3nnHHe Harpy3kn yBeHHuBaIoT BepoTHOCtB CKpyuHaHn N CxIMMaHn DnCKa B pa3pe3e, YTO yBeHHuBaET IaHC OTdaHn I pa3pyuHen nDncka.
b) He pacnonarate Teo B oHoi nloockocn C Bpaauoumcra DnCKOM. Korda dNcK Bo Bpemr paobtB HaprabIeTcno HapabJIeHIO OT BAC,Bo3moXHa r OtdaHa HapabNT BpaauoUncra DnCK n 3neKtpoHHCTpymEnB Bauy ctopohy.

c) B cnyuae 3acTpBeHaHn DaNcKa n npn nppepbIbAHn pe3Kn no KaKIM-Nn6o npuynHAM OTKJIIOUHTe NHTaHne 3NEKTponHCTpyMeHTa n ydePKNBaHTe INCTpyMeHT 6e3 DBNXeHNy DO Tex NOP, NOKA n3dEIne NOHOCTBn He OCTaHOBNTc. HnkOrda He nbTaIaTecb N3BLeueb DnCK n3 pa3pe3a BO BpEM Pa60TbI N3dEHNr, 3TO MOxET npNBecTN K OTDAue. BbIaCHnTe uycTaHnTE npuynHy 3acTpBeHaHn DaNcKa.
d) He BkIouaIte 3neKtpOnHCTpymeHT, noka dNCK haoDntcB pa3pe3e! DoXdntecb, noka 3neKtpOnHCTpymeHT pa3roHNTcdo noJHoN CKOpocTn, 3aTeM nonpo6yIte aKKypaTHO NOMEcTb Dnck B pa3pe3. B cnyae 3anycka 3neKtpOnHCTpymeHTa B pa3pe3e DnCK MOxET 3actpyTb, BBICKOHTb N3 pa3pe3a, INI O7bpcOnTb INHCTpymeHT Ha3ad.
e) PanaJIH nIpoUne pa6OuNe MaTePnaJIbI 6oJIbIoro pa3Mepa Heo6XoDnMo NOIepeKINBaTb, YTO6bl DOBecTI BO3MOxHOCTb 3aUeMJIeHnI N OTdauN Do MHNIMyMa. BoJIbUne pa6OuNe MaTePnaJIbI UaCTO IOMaIOTc IOI CO6CTBeHHbIM BECOM. IOnIepeKINBaIOUne KOHCTpyKUnn Heo6XoDnMO yCTaHaBNIbAIB TIOI pa6OuIM MaTePnaIOM C O6eHX CTOpOH pa3Pe3a, a TaKKe IIO KpaM.
f) C oco6oB octopoxhocTBb BblnoHnIte onepaunn no Bblpe3aHmIO OTBepCTn. NcK MoXeT HaTKHyTbcra Ha ra3OBbIe Tpy6bl, BOOpnpOBoD, 3JeKTPponpOBOkny n IpOChE 06BeKtbl, YTO MOxET npNBecTn K OTdaue.

3JIeKtpnuecka 6e3onacHocTb

Bo BpemnncnoB3OBaHnna 3JKeTPOHHCTpyMeHTa BCErda co6IIOJaTe npabnla Texnkn 6e3oNaCHOCTN, DeiCTByUOuNE B Baue nCTpaHe, UTObI CHN3NTb PNCK BO3HKnHOBeHn naXapa, NopaxeHnna 3JeKTPnueckm TOKOM nNoJyehnra TpaBM. IpouHTaTe cneDyUOuNe IHCTpyKunn no TEXnke 6e3oNaCHOCTN, a TaKke npunaRaembe HNCTpyKUnn NO Texnke 6e3oNaCHOCTN.

Y6edumecb 8 mom, ymo Hapjxehue Ucmouhka numaHua coomeemcmeyem HapjxehuO, yka3aHHOMy ha maBnUke c mexHuueckmu daHHbIMU.

I3dene II Klacca -Eouha u3oJuaB 3a3emHeHou po3emKe hem Heo6xodumocmu.

Ecnn nCnoNb3OBAHnne 3NeKtpOnHCTpyMeHTa B yCNOBnX BnaxHoN OkpyKaIOUeN cpebl HEn36ExkHO, Heo6xOdIMo NcNoJIb3OBaTb NCTOCHNK TOka, 3aunuehHbYCTPOINCTBOM 3aunTHoro OTKnIoueHn (Y3O).PnpmeHnue Y3O CHNXaET pNCK nopaxKeHn 3NeKtpnueckm TOKOM.

2. CBEDEHNA 06 3JIEKTPONHCTPYMEHTE

Ppeonaraemoe nCnoJb3ObaHne

JaHHa yIIOBaa IINΦMaIIHnHa pa3pa6oTaHa IJIa
IINΦOBKn KaMeHHbIX n CTaJIbHbIX MaTePnaIOB
6e3 OxJaxKeHnBaODoN. IJIpe3Kn He06xOIM
OCo6bI 3aUHTbI KOKyX (He BXoNT B
KOMnneKTauNIO) Pnc. D2.

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 74.

gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall gall

slll jyiygclgai yia 10000000000000000000000000000000000000000000000000000000000

aaii iiaaiii aaiiaai aiiaai iiaai

a 2

Jglai Jjao Jg jie Ige bia 8 gabll sRg 《a） （1
Jz jy jy jll jil jil bia jil jil gab g aay plall
Jz jI jiai gabll g jSill glill g jil g jil g jis
la Jsu

sll sll sll lal gil aai y ( 1
laill jy ad slw jg - jg tll abai -
jle al ay gll sll oyl

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Jai 8sll E g. Jaal aab b g aba Jus 12
j Sll g aee aab Jus 12 g aagllgic
g y aay sll sl 12 Jus 12 g 12

J 1000000000000000000000000000000000000000000000000000000000000000000

000000000000000000000000000000000000000000000000000000000000000

f( x) 定义域为 x x k t_2t_2 , k z\

Jgssal 1000000000000000000000000000000000000000000000000000000000000000

aal aal 1000 aal g qg jao kail gaiy

1 2

a 1000000000000000000000000000000000000000000000000000000000000000

454

gauaiuai

jaiil 1gall glll algo gulil lgl jil gul slal paa ai jie) aiaa gial plasnil iag bail aill g.alsplasnil

A

AGM1117PAGM1119P

~العَلُف 240-230	العَلُف 240-230
العَلُف 60/50	العَلُف 60/50
العَلُف 2600	العَلُف 2600
العَلُف 6.000العَلُف 8.500	العَلُف 6.000العَلُف 8.500
	العَلُف 6.000العَلُف 8.500
م 180pm 230	م 180pm 230
م 22.2	م 22.2
م 6	م 6
	م 6
م 180pm 230	م 180pm 230
م 22.2	م 22.2
م 3	م 3
14M	م 14M
م 6.6pm 6.7	م 6.6pm 6.7
(Ⅰ) م 3+96.1	(APL) م 3+96.1
(Ⅱ) م 3+107.1	(AWL) م 3+107.1
م 1.5+7.86	GA,ha «العَلُف 《卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜卜

jijai jin

J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J

aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aiaia aieaa

laal g, lgaal oal y aol jy jayl jai na slippal

#

aal 1

i

jrrsall 2000 jz.1

1.2

( 2 + 1 : k整除) ( k + 1 : k整除) = 3

10.2.11 Sll 1e 11ac .4

Juaaill Jaaai/ Jaaiia 5.5

jilal jaii 6

7

1.18

J

0.25( 2) .24

45 9

(jaa 10j)

11

12

1.5

#

(juaa j) 1

jL

2.1.14

1.

S OBC = S ABC + S_ BOC

11

gill

（20 1

（）（）

J 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 15

（）j 1

a

a 151111111111111111111111111111111111111

（）

y

(3) · = 0

.（jia）yé）wai yiyuolglipai

（） 1000

m = 311

.5g aillieic jaiy jaii jaii

Jaaa aie o jai

Lkaly biaill .Jall aabslay 1y Jy

JL 15

3

Jai g jai Jai jai Jaal aai pa Jaa Sla Jai ai bai ji 12ay i dai y

（）

.（0）jai//jui//iie 15 jai 15
.（1）jai//jui//iie 15 jai

Jaa Jai aai 100

a_i + 1 = 12

a 1

(babaaial aal) gaiyai aiia jai

aal 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

y jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll

a1 = 2,an + 1 = n1 + an

中

g 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

a 1

J 1

（）

a

a jll slal jn jy jll slj jna (1 2) a jll jll

jai jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia

a y j 1

a01 0d

#

ayjIgio jalill, Jiaia Kki Jaiuilllll aol glill

aill

glll gag. jillipinall

j

AÇILI TAŞLAYİCI

AGM1117P 2600W - 180MM

AGM1119P 2600W - 230MM

Ce HaneBaMe IeKa Ke yKuBaTe KopncTejkn rO OBOJ npOn3BoM MHOry HapeDNH rOHN.

1. B6E3BEdHOCHN yIATCTBA

Ipoumajme zu npunoKeHume, donoHumeHume 6e36edHocHu npedynpedyba u ynamcmbama.

IoopeuHOMo cnebe Ha 6e36edHocHume npeynpedyba u ynamcmeama moke da doeede do cmpyen ydap, nokap u/Unu meuku noepedu. 4yeajme zu 6e36edHocHume npeynpedyba u ynamcmeama 3a da moxeme noepomno da zu npouumame.

CneHnTe CmboJIe KOpNCtAT BO yNaTcBAtA nnHa npOn3BOoT:

Ppouumaj 20 ynamcmeomo.

O3nauyba pu3uk od noepeda, 2y6be Ha kusom unu owmemybahe Ha anamom 80 cnuyaj Ha Henooymahe Ha ynamcmeama.

Pu3uk oO cmpyeH ydap

Bednau 3eademe ja npuknyuuaama od cmpya ako kaabenom e oumemekako u 3a epeme Ha yucmehe u oddjkyeahe.

Pu3uk od pa3nemahu objekmu.
Ppucymhme nuca da ce nodaeneky od
paobomhama obnacm

Cekozaw Hoceme 3awmuma 3a oume!

Hoceme 3aumuma 3a cnyxom.

Hoceme 3auummu paka6u.

He 20 npumuckajme 3a6pa8nukom 3a epemeho dodeka Momopom pa6omu.

Pu3uk oD noXap.

He 20 denohupajme npou3eodom 8o hecooDBemHu caoeu.

Pou3bodom e 8o coaNaChoc m Co 8aeukume cmaHapdu 3a 6e36edHocm 8o Eeponckume cmepuu.

Бe36eHocn npedynpedyBaHa 3aednukn 3a 6pyceHe nIa6pa3NBn ceYeHa:

a) OBoj eNeKtpnueH aIaTe hAmehET 3a 6pyceHe. IpoUHTajTe rI cIte 6e36eHocHn npEynpeDyBaHa, yNaTCTBaTa, nIyctpaunu IN TexHnuchN IOdaTOCuN 3a OBOJ eNEKtpnueH anat. Ako He ce npndpKvBaTe KOH daJeHnte yNaTCTBa, KOn e Ce HabeDeH NdoJy, NoCTOn ONacHOcT Da npdeN3BnKaTe CTPyeH yIap, NOXAP n/INn TeuKN NobpeDi.
b) Onpaun KaO To Ce neckapehe, pa6oTa co KnUaHa YetKa, POnIpaHe He ce npenopayBaat Da Ce N3BeyBaat Co OBOJ eKeTpueH aNat. OnpaunTe KOH He ce npedBnDcHn 3a OBOJ aNat ppeN3BnKyBaat onacHOCT OD NOBPeHN.
c) He kopncTe Te np6Op KoJ He e npOn3BeDeH nPpenopaHaN oC tpaHa Ha npOn3BoDHTeNoT Ha aNaToT. Dypu N Kora np6OpOT Ke 6nDE npuCbpcTeH ha aNaTOT He noctoR rapaHunja 3a 6e36eNo pa6OteHe.
d) HOMHaJIHaTa 6p3nHa Ha npi6OpOT mopa Da oIroBaPa Ha max. 6p3nHa O3NaYeHa ha anaTOr. Ppi6Op KoJ pa6Ot nO6p3o od

HOMHaJIHNOT 6poj Ha BpTeKu, MoKe Da ce CkpUu N da ce pacnpcKa BO OKOJINHaTa.

e) HaDbOpEshHnOT npeuHnK n De6eHnHaTa Ha npbOpot Mopa Da 6nDaT Bo pamKeTe Ha KanaCHTetOT Ha aJAtOT. HecooDbetHa RoJIemHa Ha npbOpOT HEmOKe aDeKBaTHo da ce 3aUHTnI Na da Ce KOHTpOJIpa.
f) Habojot Ha MOHTaXHHOT npnbop Mopa Da odrobapa Ha Habojot Ha BpeTeHOT Ha 6pycnIkata.3a npnbop koj ce moHTnpa co npupa6nui, OTbOpOT Ha hacaTOp Mopa da odrobapa Ha npuehIKOT Ha npupa6nIcata. Pnp60p koj He ce cobnaRa co MOHTaHaTa reometpnja Ha aIatot Ke 6nnde He6anahCupan, INHTeH3NBO Ke Bn6pnpa N MoKe da npedeIN3BnKa r6eHe Be KOHTPOna.
g) He kopncTeTe OwtetEn npnbop. PpeceKoe KopncTeHe npOBepTe ro npbOpot, KaKo Hnp., 6pycHata nnoa Da Hema nyKHaTHn, NOdIOxHOTo nepnue Da Hema nyKHaTnHn IIN da He e n3a6eHO, XnuHaHATA qETKa da He e NCKyBaHa Hn Da Hema NCKpWeHN BlaKHa. Ako eJektpuynHOT aNat HIN npbOpot NaHAn, npOBepTe rMOXHtE OwTeYBaHa bnn CTaBeTe HeoWTeH npbOp. Pocne npOBepkata N CTaBaHBeTo Ha npbOpot, paKyBaOT u Dpyrnte npncTyTHn Da He CTOjat BO pAMHHATA Ha potnpaHeto Ha npbOpot n eJektpuynHOT anat Da ce NyTuTa pa60tn 6e3 ONTepetyBaBe oKOly 1 min. OwtetEn npbOp Ke ce pacnaDHe 3a Oba BpeMe.
h) Hocete onpema 3a JnUHa 3aWHTHa. CnopeBnOt Ha pa6oTata, KopncTeTe 3aWTnTa 3aJInCeTo, pakaBnI INn 3aWHTTH OUnna.Hocete Macka 3a npaunHa, 3aWNTa 3aCnyXOT, pakaBnI IN oBLeKa KOJa WHTTN OmMaII NOTnAOIN Od 6pyceHe INN OIN OCTpyuKc.3aWHTiTATA 3a OHTe Mopa Da 6nDE Bo coctoj6aDa IIN CONpe pa3neTahITe DEIOBN HactaHATnPnPa60ta.Mackata 3a npaunHa Mopa Da6nDE BO COCTo6Ba DA WHTTN OIN PpaunHa HacTaHATA npn pa6oTa. Kora CTne IN3NoKeHN HaDOJIroTpaJHa 6yUvA HoCete 3aWHTTA 3a CnyXOT.
i) PnncyTHnTe Da 6nDaT OndaIeHn Oda6oTHnOT npocToP. Cekoj KoJ BnErYBa Bo pa6oTHnOT npocToP Mopa Da Hocn 3aHTHa

onpema. OtnaOnuTe oJ pa6oTHoTo napye nnOcKpseHnOT np6Op MoKe da ce pa3JeTaAT n Da npEIN3BnKaat NobpeIn.

j)Држete ro eNeKtpnHnot aanat 3a n3OJnpaHn dpuKN, aKO ce n3BeyBaat pa6oTN kaj kon pe3HNOT aanat MOKe da Dojde BO KOHTaKT CO cKpneHn JNcN HIN CO conCTBeH Ka6eN. Co npceKyuBaHe Ha ,XnBa" KNuca n MeTaJIHnTe DeIOBn Od eNeKtpnHnot aanat CTAHyBaat ,KNBn" n Ke npedeN3BnKaaT CTpyeh ydap kaj paKyBaOHt.
k) Ka6eJOT da e noJaleKy od BpTnBnot np6Op. Ako ja n3ry6nte KOHTponata Bp3 aIaNtOT, MoKeTe da ro npceCte He nn da ro 3aΦaTIte Ka6eJOT n paTe Da BN 6nDaT 3aΦaTeHN oD BpTnBnot np6Op.
I) Anatot Da He ro OndoxyBaTe Doeka np6opot He npeTaHe da Ce BPTN. BptnBnot np6op MoKe Da DojDe BO KOHTAKT co NObpHnHaTa Ha Koja ce OndoxyBa N Ke ce n3ry6n KOHTpOJa Bp3 aNaTOT.
m) Anatot He cMee da pa6oTu Kora ce npeneCyBa. Co cnyuAeH doniup co npu6Opot Ke Bn ce 3a4pTu oBNekata n Ke ce NOBpeDnte.
n) PeIOBHO YIcTeTe rN OTBOpNTe 3a BeHTnlaunja. BeHTnIaTOpOT BOJIeKUBa npaUNHa I npri TOnEMn HacJaHn Ha MeTaHn npaUNHa MoKe Da DoJde Do Kyca Bpcka.
o) He pa6oTe co aJatot BO 6n3Ha Ha 3aapanBn MaTepnjann. Nckpnte moKaT da n 3anaat Obne MaTepnjann.
p) He KopncTeTe npn6op 3a KoJ Tpe6a pa3naHocpeIcTBo.KopncTeHe Ha BOJa nII pa3naHocpeIcTBo Ke npedn3BnKa cTpyen yap.

PnHHN 3a nobpaTeH yap npeDynpeDyBaHa

IobpateH yap e MOMeHTHa peakunja Ha 3aKInHeTa potnpaKa 6pycha nloya, noDnOxHo nepnue, YeTkata nn Dpyr npnbop. Pn 3aKInHyBaHbe Doar a do 6p3o coNpaBe Ha potnpaKnOT npnbop Hn Toj HauHH eNeKtpuHnOt anat ce 3aDbNxKyBa BO cnpOTNBHa Hacoka od potnpaHbTo, Bo TOuykata Ha dOnIpOT.

Ha npimep, ako 6pycHnOT dNCK ce 3aknnn BO pa60THo napye, pa60T od nckot koj Habnerol BO TOOKATA Ha 3aknHyBaHeTo MOKe da ja ka Kona NOBpunHata OD MaTepnjAOT wTO ppeIN3BnkyBa DNCKOT da CE KaUNI DA OTCKOKHe. Toj MOKe da OTCKOKHe KOH IIN Od paKyBaOTo, BO 3aBnCHoCT OJ HAcOKATA Ha DnKHeBTo BO TOUkata Ha 3aknHyBaHeTo. NsCKOT MOKe da CE cKPNI BO OBaa cocTo6a. NobpaTHNoT yap e pezytat Ha NorpeSho paKyBaHe co eNEKtpuHnOt anat N/ INI npn He npabInHa pa60Tha Noctanka INI COctO6a, a MOKe da CE n36erHe co npndpxyBaHe KOH NOJny ONnAnHTe MEPKn.

a) LbpcTo dpKTe ja paKaTa oAnatot n TeNoTo npaTe Da Bn 6NdT Bo noNoK6a Da ro od6nJat NOBpaTHnoT yap.CekoraW KopnCTnTe ja dOnoHnTeHaTa paKa, aKO ja IMa, 3a MaKcImaHa KOHTpOJa npi NOBpaTeH yap Hn Top3nOHa peakuJa 3a BpeMe Ha cTApTyBaHeTo.PaKyBaOT moKe Da To KOHTpOInpa NOBpaTHnoT yap aKO ce PnpEB3emHn COoDbETHm MepKn.
b) He ng nocTaByBajTe paueTe BO 6n3nHa ha potnpaayknot np6op. Pnp6opot moke da OTCKOKHe BO BaunTe paue.
c) He cTOnTe BO o6NaCTa BO Koja aNaTOT 6n OTCKOKHa npu noBpaTeH yAp. NobpaTHnoT yAp rTo TpyKa aNaTOT BO HAcoka o6paTaHa OD DnKHebTo Ha dNcKOT BO ToKaTa Ha 3aKnHyBaHbTo.
d)БиTe BnMaTeJHn Kora pa6oTne KoUHa,ocTpna pa6OBu nTH.N36erHyBaJTe CKOKaHe u 3akNHyBaHe Ha onpeMaTa. KoUHaTa u ocTpne pa6OBu mMaat TeHdeHcuiJa Da ro 3akNHaT BPtNBNOT np6Op n Da npedn3BnKaat nobpaTeH yap.
e) He nocTaByBajTe BepnXn JnCTOBu nn Ha3a6eHn JnCTOBn 3a nnla. Tne co3daBaat YecTN NOBpATn yapn n ryebeHa KOHTpOJa.

PpeynpeyBaHa 3a 6e36eHocT KapakTeepncnHn 3a 6pyceHe nOTcekyBaHe:

a) KopncTeTe rN dNCKOBnTe KOn ce npenopayBaat 3a BaHnot eNeKtpuYeH aIAT nOce6No KOHCTpyHpaHnTe 6paHn

3a H36paHnTe DnCKOBu,INCKOBu KOn He ce HameHeTn 3a OBOJ aNt Hema Da MoKaat aEKBaTHO da ce 3aHTnTaT co 6paHnK n Ce He6e36eHN.

b)Бpychata NOBpuHa HaДИСКOBNTe co npecobah ueHTap Mopa Da 6nDe MOHTnpaHa nCNoD paMHnHaTa Ha 6paHnKOT. HenpaBnHNO MOHTnpaH NsCK, Koj ja NaIMHyBa paMHnHaTa Ha 6paHnKOT, HEMOKe da 6nde COODBeTHo 3aWtnteH.
c)БpaHnKOT Mopa Da 6nDe cnrypHo NOBp3aH 6e36eHNO nocTaBen Ha eNeKTpnuHnOt aHaT, Taka HajmAnot Deo DNCKOT Da 6nDe n3JIOxEH KOpaKyBaOH. BpaHnKOT NOMaBo 3aHTtHa paKyBaOH Od CKPWeHn DeIOBn OD INCKOT, Cnyaeh KOHTaKT CO INCKOT N OD INCKPn KOn MoKaT Da ja 3anaJaT o6neKaTa
d)ДИСКOT Da ce npIMeHyBa cAmO 3a cooDbetHa pa6ota.Ha npIMep:He 6pyceTe co CTpaHaT a OD INsKOT.INsKOBnTe 3a OTCEkyBaHBe Ce HameHEn 3a nepupepeHo 6pyceHbe,CTpaHnUHnTe CnIn MoXaT da n INCKPsaT OBne INsKOBn.
e) Cekoraш Да Кориспге Heoштeteиnpирабни Н дскот, co корет ha rolemna H obnK 3a n36paHnot dNcK. Coobetni npipa6hiu Ha dNcKOT FO NOДржуВаAT dNcKOT co wTO ce HamaIyBa moXHocTa dNcKOT da ce ckpU. Ppipa6HnCITe 3a DnCKOBITE 3a OTcekyBaHe Moxat Da ce pa3nyBaaT od npipa6HnCITe 3a DnCKOBITE 3a 6pyceHe.
f) He KopucTeHe nCTpoWeHn DnCKOBn OndnorOJIeMn eIeKTPnuHn aNaTu. NcCKOBn KOn Ce HameHETn 3a NorOJIeMn eIeKTPnuHn aNaTu He Ce NoOrdHn 3a NorOJIeMn 6p3HHn Kaj NOMaJIte eIeKTPnuHn aNaTu.

DOnonHnTeHn npedynpedyBaHa 3a6e36eHocT kapaKTePncTnHn 3a a6pa3NBn OTceKyBaHa

Omckyaaba ca npumehnueb camo co nocbeh 6paHk (He e eknyeH) cn. C2 - D2

a) HemojTe Da ro „3arNaBvBaTe" DnCKOT 3a OTcekyBaHe Nn Da npImeHyBaTe rOJem npHTncok. He ce obuLyBajTe da npabNTe Ina6oKn pe3oBN.PpeontepetyBaHbeto Ha DNCKOT Ro 3rOJIeMyBa HaperaHbTo n YyBCTBnTEhHOCTa Ha OCUNIpaHbe Nn N3BnBAHe Ha DNCKOT, a CO ToA n MOxHOCTa 3a NOBpATEH ydap Nn KpSeHBe Ha DNCKOT.
b) HemojTe Da CTOnTE BO JINHnJaTHa DNCKOT KOJ potnpa.Kora DNCKOT,BO TOUkata Ha CeueHe,Ce DnKmOgBaWteTO TeNo,MOXHNOT NOBpaTeH yap Ke ro HAcOuN BpTnNBnOT DNCK dIpeKTHO KOH Bac.
c) KoraДиCKOT ce Jelen Илп paBn Исп配电нatoceyebe,od 6nlo Koja npuHa, ncknyeTe ro eNeKtpnHnot anat n dpxKeTe ro 6e3 DBNXeBe,doEka TpkaIATO ueNoCHO Hececonpe.He ce obdybajTe da ro n3BaNTeДИСКOT od 3aФATdoEka e BO dBIXeHe,3aHTOMOKe Da DoJde Do nobpaTe h yap.IcnntajTe n IpeB3eMeTe COODBeTHm MEPKn 3a OTKNOHyBaHBe Ha pInuHaTa 3a Jelen He NaDICKOT.
d) He ja noBtopyBajTe onepaunjaTa co nCK noCTaBeH BO pa6oTHo napue. NocKOT Da ja noCTurHe max. 6p3nHa N BHIMaTeJHo NOBtopeTe ro pe3OT. NcKOT MOKe Da JIeN, Da ce KaCyBa Harope nn Da npEiN3BVka NoBpaTeH yap aKO anaTOT ce cTapTyBa BO pa6oTHo napue.
e) NotnpTe rH nIIOUHTe Hn IROJEMNTe napuHb a 3a Da rO HaMaJIte pN3IKOT od 3aKJIHyBaBe Hn OD NOBpaTeH yDap. TOnemTPe napuHb a maaT TeHdEhCuJa da ce BNTkaat Od conCTBeHa TeXHa. Notnpnte Mopa Da ce NoCTaBat NOD napyeTo, BO 6JIINHa Ha JInHjata Ha CeueHeTo pa60t Od napyeTo, Od DBeTe CTpaHn OD INCKOT.
f)БиTe NOce6HOBHIMaTeJHn npn "HyBaHe" BO sIOBn Nn dpyrN NOBpUHH. INCKOT MOKe Na InceYe UeBKn 3a BODa, rac, eNEKtpuHa NHCTanaunja Nn object, mTO MOKe Da npeDn3BnKa nobpaTeH ydap.

EJIeKTpUHa 6e36eHnOCT

Pn KOpncTeHe Ha eNeKtpnHm MaunHn
NoHTyBaJTe r6e36eHNOCHNte npaBnla BO
BaWata 3emja, 3a da ro HamaNte pN3IKOT od
noXap, cTpyeH yIap n NobpeDi. PpOHTajTe r
cneHNTE 6e36eHOCn yNaTCTBa n npuNoKeHNTe
6e36eHOCn yNaTCTBa.

Cekozau npoepybjme danu HanoHom Ha Hanojyehaemo odoeapa Ha HabeDeHuom HANOHnloykama.

KnacaHaMaWuHaII-DeoJHa u3OuaJa - He bu e nompe6eH npuknyok 3a 3a3emjyeahe.

Ako He MoKe Da Ce 36eHrpe pa6oTeHe co eNeKtpnHnot aIaT Bo BnaxHa cpeiHa, KopncTeTe pe3uDyaneH MOMeHtEn ypeI (RCD) co 3aHTteH HanoH. KopncTeHe Ha RCD ro HamaNyBa pN3IKOT oD cTpyeH yap.

2. INHΦOPMALUJIA 3A MALINHATA

HameHa

BaWata aorHa 6pycunka e KOHCTpynpaHa 3a 6pyceHe Ha 6eToH uYeIuHn MaTepnjaN, 6e3 KopncTeHe Ha BOda. 3a ceYeHe, Mpa Da ce KopncTn noc6eHbpaHk (He e BKnyuH) cn. D2

Texnukn noaToCu

	AGM1117P AGM1119P
Мржениханон	220-240 V~
Номинална Фразковецima	50/60 Hz
Влесна мokhoст	2600W
Номинална брзINA	8.500 /min 6.500 /min
Брusesн диск
Диjsаметар	180 mm 230 mm
Насаден OTВОР	22.2 mm
ДебелINA	6 mm
Брusesн диск за сечende
Диjsаметар	180 mm 230 mm
Насадen OTВОР	22.2 mm
ДебелINA	3 mm
Haboj ha BpeTeHOTo	M14
TekiHa	6.6 kg 6.7 kg
Звун却不псок (LpA)	96.1 + 3 dB(A)
Аксточа мо́ност (LwA)	107.1 + 3 dB(A)
Вибрацни „Брусане на постени" an,AG	7.86 + 1.5 m/s2

HnboHaBn6paun

HnBOTO Ha emncjata Ha Bn6paunite, HabeJeHO BO yNATCTBOBO, e n3MepeHO BO cOrnaCHOCT CO CTaHapnn3npan Tect daen BO EN 60745; Toj MOKe Da ce KopnCTn 3a cnopeyBahe Ha edeH aNat CO npr KaO N 3a npelmmnnapHa npoceHa Ha n3IOXeHOCT Ha Bn6paunn pnp KOpNCteHe Ha anatOT BO CNOMeHaTne apnKaun

KopncTeHbetoHa aIaNToT 3a pa3nUHN anNkaunu co pa3nUHN nCna6o oDpKyBaH np6Op,MOKe 3NaHTeHNO da ro 3rOJIemn HNBOTO Ha N3IOKeHOCT
BpeMeTO KOra aIaTOT e NCKJIyueH NII KOra pa6oTN Ho He ja BpUn pa6oTaTa, MoKe 3HaUHTeJHo Da rO HamaJIu HnBOTo Ha n3IOKeHOCT.

3aunTeCe od eeknte Ha Bn6paunnte co OdpxuBaHe Ha anatot npbopot, paute da BN 6ndat tonnn n opraHn3npajTe gn pa60THnTe HABNK.

Onnc

Epoebnte BO TEKCTOT Ce OndecyBaat Ha nnjarpamnte Ha ctp. 2-4.

Cπ.A

1. Konue 3a 3a6paBvBaHe Ha BpeTeHo
   2.ИмбусзаRTka
   3.BpaHnK(Cn.D1+D2)
2. Kanak ha jarleha YetknuKa
3. On/Off npeknHyBaay
4. Touka Ha cnojyBaHe Ha cTpaHnUHa dpShka
   7.CtpaHnUHa dpuka
   18.ИмбусКnyu

Cn.B

8.BpeTeHo
9. MoThaXHa npupa6Hnua
10.БусенДиСК(HeeBknyuEN)
11. CTe3Ha HApTka
12. Knyu

Cn.C1uD1

Бранкзабрсөнe

Cπ.C2uD2