ChargeIT Wireless 60.2028.01 - Alarm clock radio TFA - Free user manual and instructions

USER MANUAL ChargeIT Wireless 60.2028.01 TFA

CHARGE-IT WIRELESS - Wireless charging alarm clock

Thank you for choosing this instrument from TFA.

1. Before you use this product

• Please make sure you read the instruction manual carefully.
  This information will help you to familiarize yourself with your new device, to learn all of its functions and parts, to find out important details about its first use and how to operate it and to get advice in the event of a malfunction.
• Following and respecting the Instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
• Likewise, we take no responsibility for any incorrect readings or for any consequences resulting from them.
• We shall not be liable for any damage occurring as a result of non-following of these Instructions.
• Please pay particular attention to the safety notices!
• Please keep this instruction manual safe for future reference.

2. Delivery contents

Digital alarm clock
Power adaptor
- Instruction manual

3. Range of application and all the benefits of your new instrument at a glance

• Inductive charging station (according to Qi standard) and USB charging function for mobile devices
  Colour display with 4 brightness levels and automatic dimming function
• Indication of time, date with weekday written in full letters and room temperature
• Alarm with rising alarm tone
• Snooze function with adjustable interval (5 to 120 minutes)
• Mood light with automatic colour change or direct colour selection (red, yellow, green, cyan, dark blue, purple, white) in 4 brightness levels
  Non-slip stand with 4 rubber pads

CHARGE-IT WIRELESS - Wireless charging alarm clock

4. For your safety

• This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.

Caution!

Risk of electrocution!

• Plug the device only into a mains socket installed within your country's electrical safety regulations and with a correct mains voltage (see nameplate).
  The mains socket must be located near the equipment and it must be easily accessible.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water or moisture. Only suitable for indoor use.
• Do not use the device if the housing or the power adapter are damaged.
• Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of handling electrical equipment.
• Only use the supplied power adapter.
• Connect the lead to the device first and then plug the power adapter into the socket.
• Do not pull the plug out of the socket by its ca
• Route the mains cable so it does not come into contact with sharp-edged or hot objects.

Important information on product safety!

• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture!
• Protect the device from overheating when charging and provide sufficient ventilation. Make sure that the device is placed on a solid, clean surface. Do not place the device on cloth, carpet, paper or other objects that could obstruct the ventilation. Remove dust or other obstacles from the ventilation slots on the bottom of the unit.
• Do not place any other objects on the charging pad.
• Do not apply excessive force when connecting a USB cable. The USB plug fits only one way into the USB port.

CHARGE-IT WIRELESS - Wireless charging alarm clock

5. Elements

A:Display (Fig.1):

A1: Time / wake up time A2: Snooze symbol
A3:Weekday/date A4:Temperature/date
A5: Alarm symbol A6: Charging LED light
A7: Symbol for auto-dim function

B: Housing (Fig. 2+3):

B 1:Charging pad B 2:Mood light
B3: Micro USB port B4: Power adaptor jack
B 5: Ventilation slots

C: Buttons (Fig. 3):

C1:SNOOZE/LIGHT button C2:GLOW button
C3:-button C4:SET button
C5: + button
C7:RESET button

6. Getting started

• Remove the protective film from the display.
• Connect the attached power adapter to the alarm clock. Insert the power adapter pin into the device jack and connect the plug to a wall socket. Important! Make sure that your household voltage is no more than 240V! Otherwise your device may be damaged.
  The device will alert you with a beep and all segments will be displayed for a short moment.
  The device is ready for use. "HALLO" appears, then "ZEIT" and "EINGEBEN".

7. Operation

• Press and hold the + or - button in setting mode for fast mode.
• Press the SNOOZE/LIGHT button in setting mode to return to normal mode.
  The device will automatically quit the setting mode if no button is pressed for 10 seconds.

CHARGE-IT WIRELESS - Wireless charging alarm clock

7.1 Settings

• After start-up or if you press and hold the SET button for three seconds in normal mode, you will enter the setting mode.
• DEUTSCH (default) flashes on the display.
• Press the + or - button to set the day-of-the week language:
  GERMAN - DEUTSCH, ENGLISH, SPANISH - ESPANOL and FRENCH - FRANCAIS.
  If you select English, the display will now appear in English.
• Press the SET button again to do the settings in the following sequence: the 12 - or 24 hour system (FORMAT 24 Hr - default), the hours, the minutes, the year, the month and the date, the month/day sequence DATE/MONTH or MONTH/DATE (DATE/MONTH - default) and the temperature unit °C or °F (TEMP °C - default). Press the + or - button to adjust it.
• Confirm the setting with the SET button.

7.1.1 24- or 12-hour system setting

• Press the + or - button in setting mode to choose the 12 HR or 24 HR system.
• In the 12-HR system AM (before noon) or PM (after noon) appears on the display.

7.2 Alarm function

• Press the ALARM button in normal mode.
• ALARM, 6:30 (default) or the last adjusted alarm time appear on the display.
• Press and hold the ALARM button for 3 seconds.
  The alarm symbol appears and the hour digit flashes.
• Press the +or - button to adjust the hours.
• Press the ALARM button again and you can adjust the minutes with the + or - button.
• Press the ALARM button again.
• SNOOZE, the snooze symbol and 10 min. (default) or the last adjusted snooze interval appear on the display.
• Press the + or - button to set the desired time duration – it adds 5 minutes at a time (5 to 120 minutes).
• Confirm the setting with the ALARM button and return to normal mode.
  The alarm symbol will appear on the display and the alarm is activated.
• When the adjusted alarm time is reached, the alarm rings.

CHARGE-IT WIRELESS - Wireless charging alarm clock

• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and the alarm will be reactivated at the same set time on the following day. The alarm symbol remains on the display.
• Press any button to turn off the alarm sound or press the SN00ZE/LIGHT button to activate the snooze function.
• SNOOZE appears and the alarm will be interrupted for the set time.
  The time display counts down the minutes.
• Press any button to stop the snooze function.

7.2.1 Activate/deactivate alarm

• Press the ALARM button in normal mode, to activate or deactivate the alarm function. The alarm symbol appears/disappears on the display.
• Wait some seconds until the display returns to normal mode to confirm the setting.

7.3 Display mode

Each press on the SET button in normal mode will change the display between:
Weekday written in full letters and date
- Weekday written in full letters and room temperature
- Date and weekday and room temperature

8. Display light

8.1 Brightness

Press the SNOOZ/LIGHT button to adjust the brightness in 4 levels (BACKLIGHT 1-4) or to switch it off (OFF).
- Wait some seconds until the display returns to normal mode to confirm the setting.

8.2 Automatic dimming mode

• If the auto-dim mode is activated, the weak backlight turns on automatically for the set time.
  Press and hold the SNOOZE/LIGHT button for 2 seconds. AUTO DIM appears on the display.
• By default, the automatic dimming function is disabled. OFF flashes on the display.
  To activate the function, press the ^+ or - button (ON). The AUTO DIM symbol appears on the display.

CHARGE-IT WIRELESS - Wireless charging alarm clock

• Confirm with the SNOOZE/LIGHT button.
• The start time flashes (START 10:00 PM default) Press the + or - button to set the time (full hours).
• Confirm with the SNOOZE/LIGHT button.
  The end time flashes (STOP 6:00 AM default) Press the + or - button to set the time (full hours).
• Confirm the settings with the SNOOZE/LIGHT button. The display returns to normal mode and the AUTO DIM symbol remains.

8.3 Mood light mode

• Press the GLOW button in normal mode
• RED appears on the display and the mood light glows red.
• Press the GLOW button to choose between 7 colours (red, yellow, green, cyan, dark blue, purple, white) or continuous colour change (CYCLE).
• Wait some seconds until the display returns to normal mode to confirm the setting.
• Press the + or - button to adjust the brightness in 4 levels (LIGHT 1-4) or to switch it off (OFF).
• Pressing and holding the GLOW button will also turn off the mood light.

9. Charging function

9.1 Inductive charging of your mobile phone (according to Qi standard)

• Put your mobile phone on the platform. Your phone should sit flush and centred on the charging pad.
• The blue charging indicator light centrally below the display will be solid when your phone is successfully charging.
• The light will flash slowly if your device is not positioned properly or if your device is not compatible with the wireless charging technology. You may need to remove your phone cover.
• Compatibility may vary based on phone model. Please check your phone's manual for details.

9.2 Charging via USB

• This product also provides a USB charging port for devices that do not support wireless charging.
• Plug the USB cable (not included) into the USB port on the alarm clock and connect the other end to your mobile device. Make sure that the charging rate is suitable for your mobile device.

CHARGE-IT WIRELESS - Wireless charging alarm clock

10. Care and maintenance

Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
- Pull out the plug of the socket if the device will not be used for an extended period of time.
- Store the device in a dry place.

11. Trouble shooting

Problem Solution

No display Connect the device to the power adapter

Check the power adapter
Press the SNOOZE/LIGHT button to activate the backlight

Incorrect indication Use a pin to press the RESET button

No charging function Phone is not Qi compatible
(wireless) Position the mobile device properly
Remove the cover
Use USB port

No charging function (USB) Check the USB port connection

If your device fails to work despite these measures, contact the retailer where you purchased the product.

12. Waste disposal

This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment.
Disposethepackaginginanenvironmentallyfriendlymannerusing the collection systems that have been set up.

Disposal of the electrical device

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).

CHARGE-IT WIRELESS - Wireless charging alarm clock

This product must not be disposed of in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal. The return service is free of charge. Observe the current regulations in place!

13. Specifications

Measuring range temperature 0...37°C (32...99°F)

Power consumption: Power supply (included)

Input: 100-240V AC 50/60Hz 0.5A Max

Output: 5.0 V DC 2.5A, 12.5 W

Average active efficiency: ≥80.21%

No-load power consumption: ≤ 0.10W

Charging output USB port (1A)

Wireless charger power output 5 W

Transmission frequency 110-205 KHz

Maximum radio-frequency power 50.00 dBuA/m@3 m

Housing dimension 136 x 126 x 72 mm

Weight 223 g (device only)

No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

EU Declaration of conformity

Hereby, TFA Dostmann declares that the radio equipment type 60.2028 is in compliance with Directive 2014/53/EU. The

full text of the EU declaration of conformity is available at the following Internet address: www.euro.legislation.deutschland.de/frederkarten

www.fra-bssmann.de/service/ddwnidads/cb

www.tfa-dostmann.de

C1:Touche SNOOZE/LIGHT C2:Touche GLOW
C3:Touche-C4:Touche SET
C5:Touche ^+ C6:Touche ALARME
C7:BoutonRESET

6. Mise en service

Output: 5.0 V DC 2.5A, 12.5 W