60.2025.01 - Alarm clock radio TFA - Free user manual and instructions

USER MANUAL 60.2025.01 TFA

Digital alarm clock with LED digits

Thank you for choosing this instrument from TFA.

1. Before you use this product
2. Please make sure you read the instruction manual carefully.
3. Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
   • We shall not be liable for any damage occurring as a result of non following of these instructions.
4. Please take particular note of the safety advice!

5. Please keep this instruction manual safe for future reference.

6. Delivery contents

• Digital alarm clock
• DC 5V USB cable
- Instruction manual

-20--21-

Digital alarm clock with LED digits

1. Range of application and all the benefits of your new instrument at a glance

• LED digits with 2 brightness levels
- Dimming function with automatic timer
- Display of time or indoor temperature, automatic change is adjustable
- Alarm with snooze function (adjustable interval)
• Power supply via DC 5V USB port (cable Included)

1. For your safety

2. This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.

3. Unauthorized repairs, alterations or changes to the product are prohibited.

Digital alarm clock with LED digits

GB

Digital alarm clock with LED digits

GB

Caution! Ask of electrocution!

• Connect the device via the USB cable only to a suitable USB power source such as a computer, USB power adapter (DC 5V).
• The device and the USB cable must not come into contact with water or moisture. Only suitable for indoor use.
• Do not use the device if the housing or the USB cable are damaged.
• Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of handling electrical equipment.
• Unplug the device if any fault occurs or if the device is not used for a long period of time.
• Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.

Caution! Risk of Injury:

• Keep this instrument and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combination of old and new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.

Digital alarm clock with LED digits

Important information on product safety!

- Do not expose the device to extreme temperatures, vibrations or shocks.

- Protect it from moisture!

5. Elements

A: Display (Fig. 1):

A 1: Alarm symbol A 2: Time/Indoor temperature

A 3: PM (12-hour system)

B: Buttons (Fig. 2):

B 1: MODE button B 2: ALARM button

-24--25-

Digital alarm clock with LED digits

B 3: SNZ/LIGHT button B 4: UP button

B 5: DOWN button

C: Housing (Fig. 3):

C 1: Battery compartment C 2: DC 5V jack

6. Getting started

• The alarm clock can be operated with the 3 x 1,5 V AAA batteries (not included). The back-up batteries maintain the clock operation in the event of blackout or other power failure. Continuous illumination of the display only works with USB-mains connection. In pure battery operation, the display is activated briefly each time a button is pressed.
• Open the alarm clock's battery compartment. Insert three new AAA 1.5 V batteries, polarity as illustrated. Close the battery compartment again.
• For a permanent display light and to save battery life, use the supplied DC 5V USB cable.

Digital alarm clock with LED digits

• Connect the device to a suitable USB power source, such as a computer, or use a suitable power adapter (not included).
  • A beep tone is heard and 00:00 appears on the display.

7. Settings

• Press and hold the UP or DOWN button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 10 seconds.

7.1 Time setting

• Press and hold the MODE button in normal mode for three seconds.
  • The hour digit will be flashing. Press the UP or DOWN button to adjust the hours.
• Press the MODE button again and you can adjust the minutes and the 24 - or 12-hour system with the UP or DOWN button.
• Confirm the setting with the MODE button.

-26--27-

Digital alarm clock with LED digits

7.2 Alarm time setting

• Press and hold the ALARM button in normal mode for three seconds.
• 6:00 (default) or the last adjusted alarm time appear on the display.
• AL and the hour digit start blinking. Press the UP or DOWN button to adjust the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button
• 5 (default) or the last adjusted snooze interval appears on the display.
• Press the UP or DOWN button to set the desired time duration (5 to 60 minutes).
• Confirm with the ALARM button.
  • To activate and deactivate the alarm function press the ALARM button in normal mode.
  • AL appears or disappears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached.
• Press any button (except SNZ/LIGHT) and the alarm will stop.

Digital alarm clock with LED digits

• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and will be reactivated at the same set time in the following day.
• When the alarm rings, press the SNZ/LIGHT button and the snooze function is activated.
  • The alarm will be interrupted for the set time.

8. Display mode

- Each press on the MODE button In normal mode will change the display between: Time, Indoor temperature and automatic dimming function OFF/ON.

8.1 Indoor temperature mode

- Select the temperature display by the MODE button.

- Press the DOWN button, to change between °C (default) or °F as temperature unit.

-28--29-

Digital alarm clock with LED digits

- Press and hold the MODE button, until the device alerts you with a beep, time and date appear in sequence (temperature 5 s -> time 10 s). - Press and hold the MODE button, until the device alerts you with a beep, to return to the time display.

8.2 Automatic dimming mode

• Select the automatic dimming function OFF/ON by pressing the MODE button.
• By default, the automatic dimming function is disabled (OFF).
• To activate (ON) or deactivate (OFF) the function press the UP or DOWN button.
• If the automatically backlight is activated (ON), the weak backlight turns on automatically at 6 pm and switches off again at 6 am.

8.2.1 Time interval setting

- Press and hold the MODE button (display ON) to enter the setting mode for the automatic timer.

Digital alarm clock with LED digits

• The start time flashes. Press the UP or DOWN button to adjust the hours.
• Confirm the setting with the MODE button and press the UP or DOWN button to set minutes.
• Confirm the setting with the MODE button and set the end time in the same way.
• Confirm the setting with the MODE button.
• If the automatically backlight is activated (ON), the weak backlight turns on automatically for the set time

9. Display light

• You can select between two levels of brightness with the UP button.
• Attention: Continuous illumination of the display only works with USB-/mains connection.
• Battery operation: Press any button. The backlight turns on for 10 seconds.

10. Care and maintenance

- Clean the device with a soft damp cloth. Do not use solvents or securing agents.

-30--31-

Digital alarm clock with LED digits

• Remove the batteries if the device will not be used for an extended period of time.
• Store the device in a dry place.

10.1 Battery replacement

- Change the batteries 3 × 1.5 V AAA when the illumination without USB-/mains connection gets weak.

11. Troubleshooting

Problem Solution

No display USB-/mains connection:

→ Connect the device with the USB cable to a suitable power source
→ Check the connection
Battery operation:
→ Ensure the batteries' polarities are correct

Digital alarm clock with LED digits

→ Change the batteries

→ Press any button to activate the display briefly

Incorrect indication → Restart the instrument according to the manual

Battery operation:

→ Change the batteries

If your device fails to work despite these measures, contact the retailer where you purchased the product.

12. Waste disposal

This product has been manufactured using high-grade materials and components which can be recycled and reused.

Never dispose of empty batteries and rechargeable batteries in ordinary household waste. As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment.

-32--33-

Digital alarm clock with LED digits

The symbols for the contained heavy metals are:

Cd = cadmium, Hg = mercury, Pb = lead

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).

Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal.

13. Specifications

Measuring range

Temperature 0 °C... +50 °C (32 °F ...122 °F)

Digital alarm clock with LED digits

GB

Power consumption DC 5V USB cable (included)

3 x AAA 1.5 V batteries (not included)

Dimensions 150 x 50 x 65 mm

Weight 102 g (device only)

TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Werthelm, Germany

Xe part of this manual may be reproduced without written consent of TE4 Dastmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

www.tla-dosimann.de 02/19

-34--35-

The image contains no discernible text or characters.