qSeven ANC - Uncategorized JAYS - Free user manual and instructions

USER MANUAL qSeven ANC JAYS

q-Seven Wireless Getting started, safety and warrantyx1 2 s

4Product and controls overview

NC LED indicator NC button Operation LED indicator Multi-function button Track / Volume button Audio jack USB jack Microphone

Общий обзор продукта и элементов управления Светодиодный индикатор шумоподавления (NC) Кнопка шумоподавления (NC) Светодиодный индикатор режима работы Многофункциональная кнопка Кнопка переключения треков / регулировки громкости Аудиоразъем Разъем USB МикрофонImportant safety instructions Read, follow and keep these instructions. For the best possible experience, always use the product as described by the manufacturer. Always handle your headphones with care and protect them from external damage. Clean your headphones using a soft dry cloth. Never use water, cleaning detergent, leather polish or other. substances as they may damage your headphones permanently. Avoid exposure to extreme conditions such as very cold or hot temperatures, magnetic fields or damp environments. Listening to music at high volume for prolonged periods of time can cause permanent damage to your hearing. Contains small parts and are not suitable for children age three (3) and below. The headphones contain magnetic material. The headphones contain a Lithium battery. If misused or damaged it can become a hazard and is at risk of explosion. Should a battery cell leak, do not allow the liquid to come in contact with skin or eyes. The headphones must not be disposed of with regular household waste. Please dispose of in accordance with local regulations. Do not use your headphones in the immediate proximity (10 cm) of a pacemaker. Do not subject the headphones and included accessories to abnormal wear and tear. Do not expose the headphones to temperatures below -20°C or above +45°C. Do not charge the headphones in temperatures below 0°C or above +45°C. Do not attempt to burn the headphones. The battery could explode causing injury and death. Do not attempt to open, modify, disassemble, repair or in other way access the internal structure of the headphones. They are notuser serviceable. Do not use or store the headphones near to a vehicle airbag due to risk of injury. Do not use headphones while driving, jogging or walking through traffic areas. Headphones effectively isolate external sound and noise which means that when in use, you might not be able to hear your surroundings. Do not drop, sit on or cause other unusual impact to the headphones. Do not expose to fire, water or high voltage equipment. Do not expose the headphones to rain or moisture. Do not use the headphones near water, bathtubs, sinks, saunas, pools, other liquids or moist areas.

23.Statements EU Declaration of conformity Hereby Northbaze Group AB declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements. The complete declaration of conformity can be found at www.jaysheadphones.com. Caution Risk of explosions if battery box is damaged or opened. Dispose of used battery according to your local waste disposal authority. US Compliance Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Complies with IMDA Standards DA106614 Canada Compliance Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement. Model name: Q7W01

CS29416 Energy EfficiencyVerifiedGetting started Power on/off and pairing To power on, press and hold the multi-function button for 2 seconds until the operation LED lights up in white. The headphones enter pairing mode automatically as the operation LED flashes quickly in red and white. To pair, go to Bluetooth

settings on your device and select “JAYS q-Seven Wireless”. The operation LED will flash slowly in white upon a successful connection. To power off, press and hold the multi-function button for 5 seconds. The operation LED flashes once in red and then in both red and white before the headphones powers off. If the Bluetooth

on the paired device turns off, the headphones will turn off automatically after a few minutes. Reconnecting and additional pairing Next time you power on, the headphones will automatically try to reconnect to the most recently used device. If not found, pairing mode will automatically be initiated again. If you manually disconnect the headphones from the device, press the multi-function button once to enter the pairing mode. To force pairing mode, press and hold the multi-function button for 3 seconds from off state. To clear the pairing history, press and hold the multi-function button and Volume+ button for 5 seconds. For more information and help on reconnecting and additional pairing, please view the troubleshooting. Using the NC button To enter ANC mode, single click the NC button, the NC LED will light up in white. To enter HearThrough mode, single click the NC button, the NC LED stays white. To go back into ANC mode, single click the NC button, the NC LED stays white. To turn off ANC or HearThrough, hold the NC button for 2 seconds, the NC LED turns off. Using the audio cable Connect the audio cable to the audio jack and your device. The device will automatically switch over from Bluetooth to the audio cable. Battery status and charging The operation LED flashes quickly three times in red as the battery level is running low. Charge by connecting the included USB cable to the USB jack on the bottom of the right ear cuff and connect it to any certified USB power output. The operation LED will glow in red during the charging. When the headphones are fully charged, the operation LED will glow in white for 10 seconds, then the operation LED turns off. A full 100% charge will take around 2-3 hours (depending on temperature and charger). EN EnglishButton functions and LED indicators Using the multi-function button Function Answer/End call Redial latest caller Reject call Voice control Play/Pause music Power on Power off Clear pairing record Operation Single click multi-function button Triple click multi-function button Press multi-function button for 2 seconds Double click multi-function button Single click multi-function button Press multi-function button for 2 seconds Press multi-function button for 5 seconds Press multi-function button and volume+ for 5 seconds Operation LED indicator Explanation Power on Power off Standby Low battery During charging Finished charging Operation LED Flash in white Flash in red / white Flash in white Flash in red Solid red light Flash in white Explanation Bluetooth

connection Lost Bluetooth

connection Clean Bluetooth

list Incoming call Operation LED Flash in red / white Flash in white Flash in red / white Flash in white Flash in white Operation LED indicatorTroubleshooting Problem pairing and connecting

Make sure the headphones are not connected to another device.

Disable and enable Bluetooth on your device.

Move the headphones closer to the device or alter their positions to avoid Bluetooth interference.

Verify no other wireless equipment interfere with your headphones Bluetooth signal. Problem with sound transmission Move the streaming device to another position. Your body, distance, different materials and other wireless equipment can interfere with the wireless signal between your device and headphones. FAQ and quickstart guide Visit jaysheadphones.com for more instructions and help on this product.Legal & Warranty Environmental information This product complies with international directives, including but not limited to WEEE Directive (2012/19/EU). Do not dispose with normal household waste. Please consult your local waste disposal authority for guidance on how to properly recycle or dispose of this product. Manufacturer’s limited warranty Your original Northbaze Group AB product is covered by a warranty of twelve (12) months from the date of purchase of a brand new, unused Northbaze Group AB product by the original purchaser. Northbaze Group AB guarantees that the product is free from faults in the materials, design and workmanship when it was sold to the purchaser. If you are not able to submit the receipt when making a warranty claim you may be obliged to pay for any repairs carried out. Proof of purchase must clearly state the date of purchase, name of the product and authorized resellers’ details. The Warranty Period cannot be extended or renewed due to subsequent resale or replacement of the product. This Limited Warranty does not affect your legal rights under your applicable national laws relating to the sale of consumer electronic products. Defective parts replaced within the Limited Warranty Claim shall become the property of Northbaze Group AB. What is not covered by the limited warranty?

• Faults caused by wear and tear, age-related battery capacity loss, accidents, dropping, mechanical damage, moisture, chemical products, abnormal impact damage or force majeure.