PAPK 12 B2 - Battery PARKSIDE - Free user manual and instructions

Product type	Rechargeable Li-Ion battery
Brand	Parkside
Model	PAPK 12 B2
Nominal voltage	12 V=
Capacity	4,0 Ah
Energy	48 Wh
Number of cells	6
Charging time	Approximately 2 h
Charging temperature range	4 – 40 °C
Operating temperature range	-20 – 50 °C
Storage temperature range	0 – 45 °C
Maximum permissible temperature	50 °C
Approximate weight	400 g
Compatibility	Parkside X 12 V TEAM tools
Compatible chargers	PLGK 12 A1, PLGK 12 A2, PAPK 12 A1, PAPK 12 A2, PAPK 12 B1, PAPK 12 B2
Charge indicator	LED: red (low), yellow (half charge), green (full)
Maintenance	Clean with a dry cloth
Spare part reference	80001262 (PAPK 12 B2)
Warranty	3 years (France and Belgium)

Frequently Asked Questions - PAPK 12 B2 PARKSIDE

Which chargers are compatible with the PAPK 12 B2 battery?

The compatible chargers are: PLGK 12 A1, PLGK 12 A2, PAPK 12 A1, PAPK 12 A2, PAPK 12 B1 and PAPK 12 B2. Only use a charger recommended by PARKSIDE to avoid any risk of fire.

How to check the battery charge level?

Press the button on the battery (or hold down the device switch) to light up the LEDs. The indicator shows: red = low battery, red+yellow = half charge, red+yellow+green = full battery.

What is the charging time of this battery?

The full charging time is approximately 2 hours with a compatible charger.

Is the PAPK 12 B2 battery compatible with all Parkside X 12 V TEAM tools?

Yes, it is compatible with the entire Parkside X 12 V TEAM range. It can power all tools in this series.

What is the recommended storage temperature for the battery?

Store the battery in a dry, temperate place between 0°C and 45°C. Avoid extreme temperatures to preserve its performance.

How to clean the battery?

Clean the battery and charger with a dry cloth or brush. Never use water or metal objects.

What to do if the battery no longer holds a charge?

If the battery life decreases significantly despite regular charging, the battery is worn out. Replace it with a new battery of reference PAPK 12 B2 available from customer service.

Can I use the battery in cold or hot weather?

The battery can operate between -20°C and 50°C. Warning: charging is only possible between 4°C and 40°C. In very cold weather, let the battery return to room temperature before charging.

What safety precautions should I follow?

Do not expose the battery to fire, water, or temperatures above 50°C. Do not open it and avoid short circuits. Only use recommended chargers and follow the instructions in the manual.

How to dispose of the battery at end of life?

Do not throw the battery into household waste. Take it to a recycling center or a collection point for used batteries. You can also send it back to customer service which takes care of free recycling.

USER MANUAL PAPK 12 B2 PARKSIDE

Translation of the original instructions

NL BE

Accu 4 Ah

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

Intended purpose……18

General description..... 18

Extentofthedelivery.....18

Overview. 18

Technical data 18

Safety instructions.....19

Symbolsinthemanual.....19

Symbols on the battery ....19

General Safety Directions..20

Checking the battery charge

level 22

Used batteries. 22

Storage. 23

Cleaning 23

Maintenance 23

Disposal and protection of the environment.... 23

Replacement parts/ accessories. 24

Guarantee 25

Repair Service............27

Service-Center 27

Importer 27

Translation of the original EC declaration of conformity 98

Introduction

Congratulations on the purchase of your new device.

With it, you have chosen a high quality product.

During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They con

tain important information on safety, use and disposal. Before using the product, familiarise yourself with all of the operating and safety instructions.

Use the product only as described and for the applications specified.

Keep this manual safely and

in the event that the product is passed on, hand over all documents to the third party.

Intended purpose

The rechargeable battery is to be used in conjunction with a device from the Parkside X 12 V TEAM series. The rechargeable battery compatible with all devices in the Parkside X 12 V TEAM series. Any other use that is not explicitly approved in these instructions may result in damage to the equipment and represent a serious danger to the user. This equipment is not suitable for commercial use. Commercial use will invalidate the guarantee. The manufacturer is not liable for damages caused by an improper use or incorrect operation of this device.

General description

The illustrations are on the front fold-out page.

Extent of the delivery

• Rechargeable battery
• Instruction Manual

Battery and charger are not included.

Dispose of the packaging material correctly.

Overview

1 Rechargeable battery 2 Battery release but ton

Technical data

Rechargeable battery (Li-ion) PAPK 12 B2 Number of cells .6 Nominal voltage. 12V = Capacity.4,0 Ah Energy.48 Wh Charging time ca.2 h Temperature max. 50^ Charging process..4-40°C Operation.-20-50°C Storage.0-45°C

This device can only be operated with the following rechargeable batteries: PLGK 12 A1, PLGK 12 A2. This type of battery may only be charged with the following chargers: PAPK 12 A1, PAPK 12 A2, PAPK 12 B1, PAPK 12 B2.

An up-to-date list of battery compatibility can be found at: www.lidl.de/akku

Safety instructions

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Hazard symbol with information on the prevention of personal injury caused by electric shock.

Instruction symbols with information on preventing damage.

Help symbols with information on improving tool handling.

Symbols on the battery

The rechargeable battery is

part of the Parkside X 12 V TEAM series.

Read the operating instructions carefully.

Do not dispose of batter

ies in household waste, fire or water.

Do not subject the battery to strong sunlight over long periods and do not

leave it on a heater (max. 50^ C ).

Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner.

Electrical devices must not be disposed of with domestic waste.

General Safety Directions

Caution! When using power tools, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and fire. Please read all these instructions before using this electric tool and please keep the safety instructions.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are recommended by the manufacturer. Risk of fire if a charger that is suitable for a specific type of battery is used with other batteries.

• In the power tools, use only the batteries designed for the purpose. The use of other batteries may result in injuries and risk of fire.

• Keep the unused battery away from paper clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery contacts may cause burns or fire.

• If used incorrectly, liquid may leak from the battery. Avoid contact

with this. In the event of accidental contact, rinse off with water.

If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns.

• Do not use damaged or altered batteries.

Damaged or altered batteries can be unpredictable and lead to fire, explosion or risk of injury.

• Do not expose batteries to fire or elevated temperatures. Fire or temperatures over 130^ C can cause an explosion.

• Follow all instructions for charging and never charge the battery or the battery-powered tool outside the temperature range stated in the operating instructions. Incorrect charging or charging outside the permitted

temperature range may destroy the battery and increase the risk of fire.

Service

• Never repair damaged batteries. All battery repairs should be carried out by the manufacturer or authorised customer service centres only.

Special safety directions for battery-operated tools

• Ensure that the device is switched off before inserting the battery. Inserting a battery into a power tool that is switched on may result in accidents.

• Recharge the batteries indoors only because the battery charger is designed for indoor use only.

To reduce the electric shock hazard, unplug

the battery charger from the mains before cleaning the charger.

• Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and there is a risk of explosion.

• Allow a hot battery to cool before charging.

• Do not open up the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical assistance.

• Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or fire.

Checking the battery charge level

The battery's (1) charge level is indicated by the charge state indicator.

• The charge level of the battery is indicated by illumination of the corresponding LED lights while the device is in operation. Press and hold the power button to view.

red-yellow-green => Battery fully charged red and yellow => Battery half charged red => Battery needs to be charged

Used batteries

• If a fully recharged battery lasts for considerably shorter operating times, the battery is used up and needs to be replaced. Only use an OEM battery pack replacement available from our Customer Service.

Always take heed of the applicable safety instructions as well as the environmental protection regulations and information (see "Cleaning and Maintenance").

Storage

• Remove the battery before storing the unit for longer periods of time.
• During a longer storage period, check the state of charge of the battery and recharge if necessary roughly every 3 months.
• The storage temperature for the battery is between 0^ and 45^ . Avoid extreme cold or heat during storage to ensure the battery output is not adversely affected.

Cleaning

Clean the charger and the battery with a dry cloth or with a paint brush. Do not use water or metal objects.

Maintenance

The appliance cleaner is maintenance free.

Disposal and protection of the environment

Remove the battery from the device and take the device, battery, accessories and packaging for environmentally friendly recycling.

Machines do not belong with domestic waste.

Do not dispose of batteries in household waste, fire (risk of explosion) or water. Damaged batteries may damage the environment and your health if toxic fumes or liquids leak out.

• Return the unit to a recycling centre. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.

GBIE

• Dispose of batteries in discharged condition. We recommend covering the pole with adhesive tape to prevent a short circuit. Do not open up the battery.

• Dispose of batteries in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environmentally friend-

ly manner. For information about this, ask your local waste management company or our service centre.

Defective units returned to us will be disposed of for free.

Replacement parts/accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu

If you have issues ordering, please use the contact form. If you have any other questions, contact the "Service-Center" (see page 27).

Battery PAPK 12 A2. 80001263

PAPK 12 B2 .80001262

Charger PLGK 12 A2, EU. 80001335

PLGK 12 A2, UK .80001336

Guarantee

Dear Customer,
This equipment is provided with a 3-year guarantee from the date of purchase.

In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase. If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred. If the defect is covered by our

guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The warranty is only valid for material or manufacturing defects. This warranty does not extend to consumable parts exposed to normal wear and tear (e.g. battery capacity).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Neither does it extend to damage resulting from water, frost, lightning and fire or improper transport. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

• Please have the receipt and item number (IAN 338177_2001) ready

as proof of purchase for all enquiries.

• Please find the item number on the rating plate.

• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

• After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories

supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you. We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect. Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

GB Service Great Britain Tel.: [phone] E-Mail: [e-mail] IAN 338177_2001

IE Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [e-mail]
IAN 338177_2001

Importer

Please note that the following address is not a service address. Please initially contact the service centre specified above.

Translation of the original EC declaration of conformity
We hereby confirm that the Battery design series PAPK 12 B2 IAN: 338177_2001 conforms with the following applicable relevant version of the EU guidelines:
2014/30/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been applied:
EN 62841-1:2015 Appendix K EN 55014-1:2017 • EN 55014-2:2015 IEC 62133-2:2017 • EN 62321-1:2013
This declaration of conformity(20)** is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG Stockstädter Straße 20 63762 Großbostheim Germany 31.07.2020	Christian Frank Dokumentációs megbízott

• The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.
  ** The last two digits of the year in which the CE marking was affixed.

From responsible sources

FSC* C142550

FSC

www.fsc.org

MIXTE