SILH 4 A1 - Phone holder SILVERCREST - Free user manual and instructions

Product type	Phone holder with wireless charging
Brand	SilverCrest
Model	SILH 4 A1
Dimensions (holder)	approx. 21.7 x 9.9 x 11.0 cm
Weight (holder)	approx. 190 g
Dimensions (USB/vehicle adapter)	approx. 8.4 x 3.5 x 3.1 cm
Weight (adapter)	approx. 28 g
Input power	12/24 V (cigarette lighter socket)
USB output	5 V ⎓ 2 A / 9 V ⎓ 1.8 A
Wireless charging power	5 to 10 W (depending on device)
Charging technology	Qi® induction
Attachment	Suction cup with locking lever
Max. phone size	16.3 x 8.0 x 0.8 cm
Max. phone weight	300 g
LED lighting	Yes (blue for operation, pulsing for charging)
Replaceable fuse	Yes, type F4AL 250V
Operating temperature	+15 °C to +35 °C
Storage temperature	0 °C to +40 °C
Permissible humidity	≤75 % (non-condensing)
Maintenance and cleaning	Disconnect before cleaning; use a slightly damp cloth, no abrasive products
Safety	Do not place in airbag deployment zone, keep out of reach of children, do not expose to extreme heat
Warranty	3 years
Customer service France	0800 919270
Customer service Belgium	contact first via hotline

Frequently Asked Questions - SILH 4 A1 SILVERCREST

How to attach the holder to the windshield?

Make sure the surface is clean and dry. Press the suction cup onto the windshield and push the locking lever up to create a vacuum. To remove, lower the lever and lift the tab.

How to charge my phone wirelessly?

Plug the USB/vehicle adapter into the cigarette lighter, then connect the micro-USB cable to the holder. Place the phone on the supports: the jaws close automatically and charging begins. The blue LED pulses during charging.

Which phones are compatible with Qi charging?

All phones compatible with the Qi standard are supported. Some models require removing the case. If your phone is not compatible, you can use a suitable Qi adapter.

What to do if charging does not start?

First check the connection to the cigarette lighter: depending on the vehicle, the ignition must be on. If the white LED on the adapter does not light up, the fuse may be defective (see next question). If the LED flashes quickly, the phone is not Qi compatible or the case needs to be removed.

How to replace the fuse of the adapter?

Unscrew the threaded cap of the adapter, remove the connector tip and the fuse (A). Replace it with a fuse of type F4AL250V. Screw the cap back on. If the problem persists, contact customer service.

Can I use the holder with a thick phone case?

It is recommended to remove thick cases for efficient charging. Some thin Qi-compatible cases may work, but the manual advises removing the case if charging does not occur.

Is it safe to use this holder in the car?

Yes, provided you follow the instructions: do not place it in the airbag deployment zone, do not obstruct driving, and do not leave it in the car in extreme temperatures. Disconnect it after use to avoid draining the battery.

What are the maximum dimensions of the accepted phone?

The holder can accommodate phones up to 16.3 x 8.0 x 0.8 cm and a maximum weight of 300 g.

How to clean the holder?

First unplug the device. Use a slightly damp cloth without harsh or abrasive cleaning products. Then dry it with a soft cloth.

What is the warranty of this product?

The warranty is 3 years from the date of purchase. Keep the receipt. For any complaints, contact customer service at 0800 919270 (France) or via the address mentioned in the manual.

USER MANUAL SILH 4 A1 SILVERCREST

PDF online www.lidl-service.com SawCar

HANDYHALTERUNG MIT INDUKTIVER LADEFUNKTION / SMARTPHONE HOLDER WITH WIRELESS CHARGING / SUPPORT POUR TÉLÉPHONE PORTABLE AVEC FONCTION RECHARGE À INDUCTION SILH 4 A1

DE AT CH

HANDYHALTERUNG MIT IN- DUKTIVER LADEFUNKTION

Bedienungsanleitung

FR BE

SUPPORT POUR TÉLÉPHONE PORTABLE AVEC FONCTION RECHARGE À INDUCTION

Mode d'emploi

PL

HWYT NA TELEFON KO- MÓRKOWY Z INDUKCYJNA FUNKCJA ŁADOWANIA

Instrukcja obstugi

SK

DRŽIAK NA MOBILNÝ TELEFÓN S INDUKTÍVNOU NABÍJACOU FUNKCIOU

Návod na obsluhu

GB IE

SMARTPHONE HOLDER WITH WIRELESS CHARGING

Operating instructions

NL BE

GSM-HOUDER MET INDUCTIEVE LAADFUNCTIE

Gebruiksaanwijzing

CZ

DRŽÁK MOBILNÍHO TELE- FONU S BEZDRÁTOVÝM NABÍJENÍM

Návod k obsluze

i

DE AT CH

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB/IE Operating instructions Page 21

Line drawing of a cable with connectors and a numbered label (13), no text or symbols present.

14 i

Inhaltsverzeichnis

Einführung....2

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

DEUTSCHLAND

www.kompernass.com

Contents

Introduction....22

Information about these operating instructions....22

Copyright 22

Notes on trademarks 22

Proper use 23

Warnings and symbols used 24

Safety 25

Basic safety instructions 25

Parts description/operating components....28

Setting up 28

Unpacking 28

Check package contents 29

Disposal of the packaging 29

Handling and operation....30

Fitting the suction cup....30

Mobile phone charging 30

Troubleshooting 32

Replacing the fuse 33

Cleaning.... 34

Storage when not in use 34

Disposal.... 35

Disposal of the device 35

Appendix....36

Technical data 36

Notes on the EU Declaration of Conformity. . . . . . . . . 37

Kompernass Handels GmbH warranty ..... 37

Service 39

Importer 40

Introduction

Information about these operating instructions

Congratulations on the purchase of your new device. You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Keep these operating instructions as a reference and store them near the product. Please pass on all documentation incl. these operating instructions to any future owner(s) if you sell this product or give it away.

Copyright

This documentation is protected by copyright. Any copying or reproduction, including in the form of extracts, or any reproduction of images (even in a modified state), is permitted only with the written authorisation of the manufacturer.

Notes on trademarks

■ USB is a registered trademark of USB Implementers Forum, Inc.

The word "Qi" and the Qi symbol are registered trademarks of the Wireless Power Consortium.

■ The SilverCrest trademark and the retail name are the property of their respective owner.

All other names and products may be trademarks or registered trademarks of their respective owner.

Proper use

The car cradle is an information electronics device used for holding and simultaneously charging mobile phones in the car. Thanks to the Qi technology used, compatible mobile phones can be charged by induction charging. Incompatible mobile phones can be charged by induction charging with a suitable adapter.

Compatible connected mobile phones are automatically detected and supplied with the appropriate output voltage and current by the charger.

The car/USB adapter is only suitable for vehicles with a 12/24 V on-board socket whose negative pole is connected to ground.

The device is not intended for any other purpose nor for use beyond the scope described. The device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk is borne solely by the user.

Warnings and symbols used

The following warnings are used in these operating instructions:

DANGER

A warning at this hazard level indicates a potentially hazardous situation.

Failure to avoid this hazardous situation could result in severe injuries or even death.

▶ Follow the instructions on this warning label to avoid the risk of death or serious injury.

WARNING

A warning at this hazard level indicates a potentially hazardous situation.

Failure to avoid this hazardous situation could result in injury.

▶ Follow the instructions on this warning label to prevent injuries to persons.

CAUTION

A warning at this hazard level indicates a risk of property damage.

Failure to avoid this situation could result in property damage.

▶ Follow the instructions on this warning label to prevent property damage.

NOTE

▶ A note provides additional information that makes handling the device easier for you.

The E marking is a test mark for the labelling of components requiring approval in motor vehicles and states that the necessary tests have been carried out and that an ECE component approval has been issued.

Safety

This section contains important safety instructions for handling the device. This device complies with statutory safety regulations. Improper use may result in personal injury and property damage.

Basic safety instructions

To ensure safe operation of the device, follow the safety guidelines set out below:

- Check the device for visible external damage before use. Do not operate a device which has been damaged or dropped.

■ If the cables or connections are damaged, have them replaced by authorised specialists or Customer Service.

This device may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities, or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device safely and are aware of the potential risks. Do not allow children to play with the device. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.

DANGER! Do not allow children to play with the packaging material! Keep all packaging materials away in children. There is a risk of suffocation!

■ Protect the charging cable from hot surfaces and sharp edges and ensure that it is not stretched tight or kinked.

The device should only be repaired by authorised specialist personnel or the customer service department. Improper repairs may put the user at risk. They will also invalidate any warranty claim.

■ Defective components must always be replaced with original replacement parts. Compliance with the safety requirements can only be guaranteed by using these replacement parts.

- Do not make any unauthorised modifications or alterations to the device.

■ Never open the device housing. There are no parts inside the device which can be maintained. In addition, this will invalidate the warranty.

- Do not expose the device to water spray or dripping water, and do not place liquid-filled objects such as vases or open drink containers on or near the device.

- Keep the device away from open flames (e.g. candles) at all times.

■ Never subject the device to extreme heat or humidity. This particularly applies to storage in a car. If the car is stationary for extended periods and in hot weather with direct sunlight, high temperatures occur in the car interior and the glove compartment. Remove electrical and electronic devices from the vehicle.

■ When placing the unit, make sure that it does not obstruct steering, braking or the operation of other vehicle operating systems (e.g. airbags) or restrict your field of vision when driving.

DANGER! Do not place the device within the airbag deployment area or near it, as the device may be flung through the vehicle interior in the event of airbag deployment and cause serious injury.

■ Make sure that the device is not installed in a position in which you could come into contact with it in the event of an accident or collision.

■ Also refer to the operating instructions for your mobile phone.

WARNING! If you notice any unusual noises, a burning smell or smoke, immediately unplug the device from the 12/24 V on-board socket. Have the device checked by a qualified specialist before using it again.

All of the applicable laws in your location must be observed. Your hands must always be free to operate the vehicle safely when you are driving. Traffic safety must always take priority whilst driving. Use this device only if it is not like to lead to any hazard during driving situations.

Parts description/operating components

(See fold-out page for illustrations)

① Suction cup
② Suction cup locking lever
3 Locking lever (inclination)
4 Locking lever (ball joint)
5 Operating LED lighting
6 Holding clamps (for mobile phone)
7 Connection socket (micro-USB)
8 Supports (for mobile phone)
9 Charging surface
10 Car/USB adapter
11 Grip bracket
12 USB connection type A
13 Connection cable (USB type A to micro-USB)
14 Operating instructions (symbol)

Setting up

Unpacking

◆ Remove all parts and the operating instructions from the packaging.
◆ Remove all packaging material.

Check package contents

(See fold-out page for illustrations)

The following components are included in delivery:

• Car cradle
• Car/USB adapter ^10
• Connection cable ^3 (USB type A to micro-USB)
  • These operating instructions ^4

NOTE

▶ Check the package for completeness and signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the service hotline (see section Service).

Disposal of the packaging

The packaging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

b a

Dispose of the packaging in an environmentally friendly manner.

Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:

1-7:plastics,
20-22: paper and cardboard,
80-98: composites.

Handling and operation

Fitting the suction cup

Ensure that the surface to which you wish to attach the suction cup is clean, dry and free of grease. Make sure that the suction cup locking lever 2 is not engaged.

- Press the suction cup ① firmly against the windscreen and push the suction cup locking lever ② upwards. This creates suction, and the suction cup ① pulled tight against the windscreen.

Release the locking level 3 to adjust the inclination of the car cradle. Then press the locking lever 3 pwards.

Release the locking level to rotate the car cradle through 360^ in both the horizontal and vertical directions. Then press the locking lever upwards.

To remove the suction cup 1 from the windshield, push the suction cup locking lever 2 downwards and lift the tab at the edge of the suction cup.

Mobile phone charging

- Connect the car/USB adapter to the 12/24 V on-board socket (cigarette lighter) of your vehicle.

The white LED in the housing indicates that the car/USB adapter is ready for operation. Depending on the vehicle type, it is possible that the ignition has to be switched on first. The car/USB adapter may only be used in conjunction with the car cradle.

Connect the USB type A plug of the connection cable to the car/USB adapter 10

- Connect the micro-USB plug of the connection cable to the connection socket (micro-USB) ⑦ of the car cradle. The operating LED lighting lights up blue and signals that the car cradle is ready for operation.

Place your mobile phone on the support 8 of the car cradle. The holding clamps 6 of the car cradle automatically move inwards.

NOTE

▶ Some mobile phones need to be taken out of their case for charging.

Charging starts immediately and is indicated on the display of the mobile phone. The pulsating operating LED lighting ⑤ also signals that the mobile phone is being charged. When the mobile phone is fully charged, the operating LED lighting ⑤ goes out.

- Lift the mobile phone to remove it from the car cradle. The holding clamps 6 of the car cradle automatically move outwards.

When charging is complete, disconnect the car/USB adapter 10 on the grip bracket 1 from the 12/24 V on-board socket.

CAUTION

In vehicles in which the 12/24 V on-board socket also works with the ignition switched off, the mobile phone must be disconnected after the 12/24 V on-board socket after use. Otherwise, the vehicle battery can be depleted over an extended period of time, as the mobile phone and the car/USB adapter 10 may still draw power even when it is idle.

Troubleshooting

A mobile phone is not charging (the white LED in the housing is not lit)

• No connection to the 12/24 V on-board socket. Check the connection.
  ♦ Depending on the vehicle type, it is possible that the ignition has to be switched on first.
  ◆ The fuse is defective. Replace the fuse (see section Replacing the fuse).

The white LED in the housing goes out when a mobile phone is connected

The car/USB adapter ^10 is overloaded and no longer charges the connected mobile phone. The internal over-current protection has been triggered. Disconnect the connected mobile phone from the car/USB adapter ^10 . The white LED lights up immediately and the vehicle/USB adapter ^10 is ready for operation again.

The LED lighting 5 flashes rapidly after a mobile phone has been placed for charging

The mobile phone is not compatible with Q induction charging technology and cannot be charged. Use a suitable adapter to charge your mobile phone by induction charging.

- Some mobile phones need to be taken out of their case for charging.

NOTE

▶ If the above solutions do not resolve the problem, please contact the Service Hotline (see section Service).

Replacing the fuse

There is a fuse in the car/USB adapter 10 for protecting the vehicle's on-board power supply. If the car/USB adapter 10 stops working, check the fuse and replace it if necessary.

DANGER

▶ Always use the same type of fuse! Otherwise there is a risk of fire.

• Open the car/USB adapter ^10 by carefully unscrewing and removing the screw insert (C) anticlockwise.
  ◆ Remove the plug tip (B) from the fuse (A) and pull out the fuse (A).
  Now insert a new fuse (A) of the type F4AL250V into the car/USB adapter 10. Place the plug tip (B) onto the slightly protruding end of the fuse (A) and screw the previously removed screw insert (C) back in.

A B C

NOTE

If the car/USB adapter ^10 still does not work or if the new fuse burns out immediately, the device is defective. Please contact the Service Hotline (see section Service).

Cleaning

CAUTION

▶ Disconnect the device from the 12/24 V on-board socket before cleaning.
▶ Do not use caustic, abrasive or solvent-based cleaning materials. These can damage the surfaces of the device.
- Clean the device only with a slightly moistened cloth.

Storage when not in use

CAUTION

▶ Disconnect the device from the 12/24 V on-board socket when not in use.
The temperatures inside the vehicle can reach extreme values in summer and winter. Consequently, to avoid damage to the device, you should not store it in the vehicle.

◆ Store the device in a location that is clean, dry, dust-free and out of direct sunlight.

Disposal

Disposal of the device

The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states that this device may not be disposed of in the normal household waste at the end of its useful life, but must be handed over to specially set-up collection locations, recycling depots or disposal companies.

This disposal is free of charge for the user. Protect the environment and dispose of this device properly.

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

Appendix

Technical data

Charger

Input voltage/current	5 V---2 A9 V---1.8 A(---direct current)
Output power	5-10 W**depending on end device
Frequency band 110-148 kHz
Max. H-Field < 66 dBμA/m @ 10 m
Operating temperature 15°C to 35°C
Storage temperature 0°C to 40°C
Relative humidity(no condensation)	≤75%
Dimensions	approx. 21.7 x 9.9 x 11.0 cm
Weight approx. 190 g
Max. size of usable mobile phones	16.3 x 8.0 x 0.8 cm
Max. weight of usable mobile phones	300 g

Car/USB adapter

Input voltage/current	12/24 V === 2.6 A(=== direct current)
Output voltage/current	5 V === 2 A9 V === 1.8 A
Fuse F4AL/250V
Dimensions approx. 8.4 x 3.5 x 3.1 cm
Weight approx. 28 g

Notes on the EU Declaration of Conformity

CE

This device complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU, the UN Regulation

R10 and the RoHS Directive 2011/65/EU.

You can download the complete EU conformity declaration from www.kompernass.com/support/313581_DOC.pdf.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.

If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

IAN 313581

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Table des matières

Introduction....42

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

ALLEMAGNE

www.kompernass.com

Inhoud

Inleiding....62

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

DUITSLAND

www.kompernass.com

Spis treści

Wstep....82

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

NIEMCY

www.kompernass.com

Obsah

Úvod 102

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

NĚMECKO

www.kompernass.com

Obsah

Úvod 122

Diagram showing four labeled components (A, B, C) of a mechanical or electrical component with internal structures.

UPOZORNENIE

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

NEMECKO

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Stand der Informationen · Last Information Update · Version des informations