HG09916A - Uncategorized Livarno Lux - Free user manual and instructions
Find the device manual for free HG09916A Livarno Lux in PDF.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HG09916A - Livarno Lux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HG09916A by Livarno Lux.
USER MANUAL HG09916A Livarno Lux
Operation and safety notes
Introduction We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Intended use This product is intended for use as protection against the wind and sun. The material of the beach shelter is not watertight over a prolonged period. It should not therefore be used in the rain. The product is not intended for commercial use. The product is not a toy.
UV STANDARD 801- UPF 60
Effect of protection factor 60 Number is multiplier for self-protection of the skin (in min.) against direct solar radiation depending on the skin type (describe 4levels) here: CHARACTERISTICS SKIN TYPE 1 SKIN TYPE 2 SKIN TYPE 3 SKIN TYPE 4 SKIN very fair-skinned fair-skinned light/dark brown light brown, olive HAIR red or blond blond, brown light brown, brown dark brown/black EYES blue, rarely brown blue, green, grey grey, brown brown/dark SUNBURNS always heavy, aching mostly heavy, aching less frequently, moderate hardly ever SELF-PROTECTION TIME OF SKIN 5–10 minutes 10–20 minutes 20–30 minutes 40 minutes Warning!
1. Particularities of a very low self-protection of children‘s skin (possibly <5 min for small children).
2. Additional use of cosmetic sunscreens is strongly recommended.
3. The product does not provide protection against reflections e.g. by water surfaces.12 GB/IE
Description of parts and features [1] Popup beach shelter [2] Peg [3] Carrying bag Safety advice KEEP INSTRUCTIONS IN A SAFE PLACE. SUBMIT ALL DOCUMENTS TO A THIRD PARTY IF DISTRIBUTING THE PRODUCT.
CAUTION! RISK OF INJURY! Ensure that all parts are undamaged and have been assembled appropriately. Risk of injury exists if assembled incorrectly. Damaged parts can effect safety and function. Any damaged parts may no longer be used.
CAUTION! Do not leave children unattended. The product is not a climbing frame or toy. Make sure that nobody climbs or leans on the product, particularly children. The product could become imbalanced and tip up. This may result in injury and/or damage.
CAUTION! RISK OF INJURY! Never under any circumstances assemble the product in a strong wind. Select a piece of land that is as flat and firm as possible to erect your beach shelter. Sandy surfaces reduce the stability of the beach shelter. Please ensure that the surface provides a firm hold for the pegs. Never knock the pegs into the ground with force! If necessary, the guy lines should only be extended with the help of a loop and the peg positioned in a different location. The intactness of all connection points and the guy lines should be checked regularly, as should the firmness of the pegs in the ground. If the beach shelter is erected in the wrong order, this may cause damage to the beach shelter. All liability is excluded in such cases. It is not recommended to take away any sewn label. Please familiarise yourself with the local fire protection regulations. WARNING! Do not use as a camping tent! WARNING! Do not have an open fire inside or in the proximity of the beach shelter! WARNING! The beach shelter may not be completely shut while there are people inside! Take note of the effects of the weather and climate Please ensure that the beach shelter is not too taut when it is erected, as otherwise it will not be able to adapt to changing weather conditions and may be damaged. Zips are wearing parts and do not fall under the guarantee conditions. Do not use any insect spray in or on the beach shelter. Small leaks on the seams can be repaired with a seam spray and impregnation spray can be used for the beach shelter skin. Assembly Note: Set the product up with the opening away from the prevailing wind direction. Please ensure that the product is only assembled/disassembled by an adult. Erecting the product ATTENTION: Please note that the poles are under tension and snap into the natural shape of the product. Taking care that the release of tension does not cause any injury. Throw the product away from you into the air. Folding the product Grab all the loops together in one of your hands. Start at the rear end in order to allow the air escape completely through the front entrance (see Fig. A–B). Keep the four loops gathered in one hand and put the product into an upwards position (seeFig. C). Press the tip of the upper loop towards the ground and move it towards the middle. Keep pressing downwards the new loops with one hand while the other hand keeps holding the other four loops together (see Fig. D).13GB/IE Loose the grip of the hand that holds the 4 loops and fold all loops into each other (see Fig. E). You can now store the product in its carrying bag [3] (seeFig.K). Cleaning
CAUTION! Never wash the product in a washing machine.
CAUTION! Never use petrol, solvent or other cleaning agents. Otherwise there is a danger of damage to the product. Condensation can form in all synthetic products; you should therefore air the tent as frequently as possible in order to counteract this. For cleaning the product and removing any stains you should only use a cleaning agent that is specifically intended for cleaning polyester products. Remove any dirt from the product with a soft sponge and clean water. Please allow all parts to dry thoroughly before you repack the product. This will prevent the formation of mould, bad odours and discolouration. If the zipper sticks when being opened or closed, spray it with silicone spray. Disposal The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product. The product incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only. Warranty The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase. Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product. Should the product show any fault in materials or manufacture within 3years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, or used or maintained improperly. The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts. Warranty claim procedure To ensure quick processing of your case, please observe the following instructions: Please have the till receipt and the item number (IAN445808_2307) available as proof of purchase. You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.14 GB/IE You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred. Service Service Great Britain Tel.: 08000569216 E-Mail: owim@lidl.co.uk Service Ireland Tel.: 1800 200736 E-Mail: owim@lidl.ie15FR/BE Introduction ............................................................. Page 16 Utilisation prévue ........................................................... Page 16 Description des pièces et caractéristiques ........................................ Page 17 Consignes de sécurité .................................................. Page 17 Assemblage ............................................................. Page 17 Montage du produit......................................................... Page 17 Pliage du produit ........................................................... Page 18 Nettoyage ............................................................... Page 18 Mise au rebut............................................................ Page 18 Garantie ................................................................. Page 18 Faire valoir sa garantie ...................................................... Page 19 Service après-vente ......................................................... Page 2016 FR/BE Liste des pictogrammes utilisés Informations de sécurité Instructions d'utilisation
ManualGo.com