Meister Craft MET 1416C - Stapler

MET 1416C - Stapler Meister Craft - Free user manual and instructions

Find the device manual for free MET 1416C Meister Craft in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product type Electric stapler
Brand Meister Craft
Model MET 1416C
Power supply 230 V ~ / 50 Hz
Protection class II
Operating speed 20 strokes per minute
Magazine capacity 50 staples (type 53F, 8-16 mm) or 50 nails (type J, 10-16 mm)
Power cord length 350 cm
Weight 1.3 kg
Intended use Fixing on wood and suitable surfaces (dowels, trellises, cardboard, plastic, fabrics)
Triple safety anti-trigger On/Off switch, contact switch, trigger
Cleaning Damp cloth, no solvents, do not immerse
Maintenance Low maintenance; use original parts for repairs
Warranty Warranty certificate included; opening the device voids the warranty
Delivery contents 1 stapler, 100 staples, 100 nails, instruction manual, warranty certificate

Frequently Asked Questions - MET 1416C Meister Craft

How to load staples or nails?
First unplug the device. Unlock the magazine lock (5) and pull the slider. Place the staples or nails into the magazine, push the slider back and lock it. Only plug the device in after this operation.
What to do if a staple gets stuck?
Immediately unplug the device. Use pliers to carefully remove the stuck staple from the magazine (4). Caution: The mechanism may be cocked. Never attempt to clear the device while plugged in.
How to clean the stapler?
Clean the housing with a damp cloth. Do not use solvents. Never immerse the device in water. Dry it thoroughly before storing. Keep the ventilation slots clean.
What power supply is required?
The stapler operates on mains 230 V ~ / 50 Hz with a standard plug. Use an approved extension cord for outdoor use if necessary.
Is the noise level high?
The device generates unavoidable noise. Always wear hearing protection during use. Measured values comply with EN 60745-1 standard.
Can I use staples from other brands?
Use only staples of type 53F (length 8-16 mm) and nails of type J (length 10-16 mm) to ensure safe operation. Using unapproved accessories can be hazardous.
How to avoid accidental triggering?
The device has triple protection: On/Off switch (1), contact switch (2) and trigger (3). To fire, press the device firmly against the workpiece, then briefly press the trigger. Never point the device at people.
Is this stapler suitable for fixing electrical cables?
No, the stapler is not intended for fixing electrical conduits. It could damage insulation and cause electric shock or fire. Use it only for the indicated materials.
What to do in case of malfunction or breakdown?
Contact Meister Craft customer service. Briefly describe the problem. Do not open the device yourself, as this will void the warranty. Keep the warranty certificate and receipt.
Where can I find spare parts?
Contact Meister Werkzeuge GmbH customer service or an authorized specialist. Use only original parts to ensure safety and compliance.

User questions about MET 1416C Meister Craft

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Stapler in PDF format for free! Find your manual MET 1416C - Meister Craft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MET 1416C by Meister Craft.

USER MANUAL MET 1416C Meister Craft

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Meister Craft

Model : MET 1416C

Category : Stapler