ManualGo.com 
RM 750 - Hand blender ECG - Free user manual and instructions
Find the device manual for free RM 750 ECG in PDF.
Download the instructions for your Hand blender in PDF format for free! Find your manual RM 750 - ECG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM 750 by ECG.
USER MANUAL RM 750 ECG
I. Bowl for chopping 500 ml
HAND BLENDER SAFETY INSTRUCTIONS Read carefully and keep for future use!
Warning: The safety measures and instructions contained in this
manual do not include all conditions and potential situations. The user must be aware that common sense, caution, and care are factors that cannot be integrated into a product. These factors must be therefore secured by the user/users using and operating this device. We are not liable for any damages caused during shipping, by incorrect use, voltage uctuation or the modication or adjustment of any part of the appliance. To protect against the risk of re or electric shock, basic precautions must be taken while using electrical appliances, including the following:
1. Make sure the voltage in your outlet corresponds to the voltage
provided on the appliance label and that the socket is correctly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN.
2. Never use the appliance if the power cord is damaged or if the
appliance is broken, if you have dropped or otherwise damaged the appliance. All repairs, including cord replacements, must be carried out at a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock!
3. Protect the appliance against direct contact with water and other
liquids, to prevent potential electric shock.
4. Do not use the appliance outdoors and in wet environment and do
not touch the power cable or the appliance with wet hands. There is a risk of electric shock.
5. Pay closer attention when using the appliance near children.
6. The appliance should not be left unattended when in operation.
7. When working with cutting blades, especially when removing
them from the container, when emptying the container, and during cleaning, be careful, because the blades are very sharp and can cause injury.GBGB
8. Do not use the device for any other purpose than the stated one.
Use for processing food only. Do not use it to stir hot foods and liquids! Always add liquid to the blended ingredients.
9. Do not leave the appliance with the power cable plugged in
unattended. Prior to maintenance, installation, assembly and disassembly of parts or cleaning, unplug the power cord from the power outlet. Do not remove the power cord from the outlet by yanking the cord. Unplug the power cord from the outlet by grasping the plug.
10. Do not use the appliance close to a source of heat, e. g. oven. Protect
it against direct sunlight.
11. Never cover the appliance during operation and do not use it close
to ammable materials, e. g. curtains, etc.
12. Do not insert large pieces of food into the appliance. Never put in
materials like paper, metal, cardboard, plastics, etc.
13. Never switch on the appliance when the container is empty and do
not remove the container until the blades come to a stop. Before starting the device, set the bowl in its proper position, attach the blade to the motor and then plug the cord into the outlet. This reduces the risk of injury.
14. Do not touch the moving parts.
15. Hair, ngers or parts of clothing shall be kept far enough from the
moving parts of the appliance. Do not place any tools or hands into the bowl while blending, risk of injury or damaging the appliance. Spatula may be used only when the appliance is o.
16. Avoid contact with moving parts. Do not touch the beaters during
operation with hand, clothing, cloth or other utensils, you will reduce the risk of injury and/or damage to the appliance.
17. Always use the appliance on an even and stable surface.
18. Do not allow the power cord to touch hot surfaces or run the cord
19. Use accessories only advised by the manufacturer, otherwise you
risk losing the warranty.GBGB
20. Prior to replacing accessories and accessible parts, or before
approaching the moving parts during operation, switch o the device and disconnect it from the power supply.
21. Always unplug from outlet immediately after use.
22. Use this appliance only in accordance with the instructions in
this manual. Incorrect use may result in injury. This appliance is designed for domestic use only. The manufacturer is not liable for any damage caused by the improper use of this appliance.
23. This appliance should not be used by children. Keep the appliance
and its power supply out of reach of children. The appliance can be used by the physically and mentally impaired or by individuals with insucient experience and knowledge, if supervised or trained to use the appliance in a safe manner and understand potential dangers. Children must not play with the appliance. Do not immerse in water! Do not press switch by hand! DANGER for children Children may not play with the packaging material. Do not let children play with the plastic bags. Risk of suocation.
INSTRUCTIONS FOR USE – BLENDER
The immersion blender is intended for preparing gravies, icings, soups, mayonnaises, children's dishes, cocktails and milkshakes. Before using the blender for the rst time, ll the bowl half way with water, immerse the blade of the blender to the bottom of the bowl and blend for several seconds. Rinse the entire attachment and bowl well afterwards.GBGB
1. Insert the ingredients into the mixing bowl or another higher kitchen container. Do not use the blender to
crush ice, cut nuts or other hard food.
2. Place the removable attachment on the motor until it "falls" into place.
3. Uncoil the entire cord and plug into the outlet.
4. Insert the appliance into the mixing bowl containing food and press the desired speed button on the
upper part of the appliance body. Rotate the ring at the top of the appliance body to select speed. Blend in circular motions from the bottom.
5. Release the button to stop the blender. Unplug the power cord from the outlet after you have nished
blending. Note: The maximum continuous operation time of the appliance is 60 seconds when processing soft foods and liquids and a maximum of 10 seconds for hard or solid foods processing, see the table below. The minimum rest period between each switch-on is 1 minute. Do not switch on the appliance more than three times in a row. Otherwise the appliance will overheat and become damaged.
INSTRUCTIONS FOR USE – CHOPPER
The chopper is designed to cut food such as meat, cheese, onions, herbs, garlic, carrots, nuts and almonds, plums, etc. Do not chop very hard food, such as ice cubes, nutmeg, coee beans or grains. Attention: The chopping blade is very sharp! Always hold it by the top plastic part.
1. Place the chopping blade on the shaft inside the chopping bowl. Always place the chopping bowl safely
on an anti-skid surface.
2. Insert the food into the bowl and apply the lid.
3. Place the appliance body on to the lid of the chopping bowl, until it clicks.
4. During the chopping process, hold the appliance body with one hand and the chopping bowl with the
5. After you are nished, unplug the appliance from the outlet and press the button for replacing the
attachments to disconnect the appliance body from the bowl.
6. Then remove the lid of the bowl.
7. Remove the chopping blade carefully and take out the chopped food.
Recommended processing (500ml) Food Maximum amount Operating duration (seconds) meat 250 g 10 herbs 50 g 10GBGB
water 165 g cream 2.5 g yeast 1.0 g sugar 1.5 g
INSTRUCTIONS FOR USE – BEATER
Use the beater only for making whipped creams, egg whites, baked goods and mixed desserts.
1. Insert the beater into the beater holder and insert this holder into the appliance body, until it clicks.
2. Insert the beater into the bowl before pressing the button to switch the appliance on.
3. After you are nished, unplug the appliance from the outlet and press the button for replacing the
attachments to disconnect the beater holder. Then remove the spatula from the holder. CLEANING Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning shall always be performed on a cooled appliance! Do not use steel wool, abrasive agents or solvents.
1. Wipe the top of the blending attachment, chopping bowl lid and beater holder with a damp towel. Do not
place into water because the lubricant could be washed away from the bearings.
2. Wipe the appliance body with a damp cloth. Never clean it under running water, do not rinse or immerse
the body into water! Attach the attachment back on the appliance body.
3. Wash the mixing bowl, chopping bowl, bottom part of the blending attachment, beater and blade in warm
soap water. We do not recommend washing the dishes in a dishwasher.GBGB
Always make sure the immersion blender is completely cooled, clean and dry before putting it away. Quick rinsing Between individual blending tasks, hold the immersion blender in a glass, half lled with water and leave the blender running for a few seconds. Attention The plastic parts of the appliance may become coloured after processing colored foods. TECHNICAL DATA Nominal voltage: 220–240 V~ 50/60 Hz Nominal input power: 750 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers. DISPOSAL OF PRODUCTS AT THE END OF LIFETIME Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specied location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product. This product complies with EU directive requirements on electromagnetic compatibility and electrical safety. The instruction manual is available at website www.ecg-electro.eu. Changes in text and technical parameters reserved.
