UM 2620 E - Mixer CLATRONIC - Free user manual and instructions

Product type	Universal blender
Brand	Clatronic
Model	UM 2620 E
Power supply	230 V, 50 Hz
Speeds	2 speeds (slow, fast) + pulse function
Pulse function	Position P to hold down
Jug capacity	Approx. 1.5 L
Jug material	Transparent plastic
Blade	Stainless steel, removable knife block
Safety	Safety switch preventing operation without jug
Cleaning	Jug parts dishwasher safe (top rack)
Dimensions (approx.)	20 x 20 x 40 cm
Weight (approx.)	1.5 kg
Warranty	24 months
Included accessories	Knife block, seal, filling cover, protection disc
Usage	Private, domestic

Frequently Asked Questions - UM 2620 E CLATRONIC

How to use the pulse function?

Turn the speed selector to the P position and hold it down for the desired duration. Release to stop; the button automatically returns to position 0.

Why won't my blender start?

Check that the jug is correctly installed: the safety mandrel of the protection disc must press the safety switch on the motor unit. Without this, the appliance will not work.

Can I blend hot foods?

No, never pour liquids at a temperature above 60 °C into the appliance, as this could damage it.

How to clean the blender parts?

Disassemble the appliance after each use. All parts of the jug (except the motor unit) can be washed in the upper rack of the dishwasher. Wipe the base with a damp cloth.

How to assemble the jug correctly?

Place the seal between the knife block and the jug, then screw the knife block on firmly. Install the protection disc and the lid. The safety mandrel must align with the switch.

What if the safety mandrel is positioned incorrectly?

For right-handed users, position the mandrel slightly below the handle; for left-handed users, slightly below the pouring spout. Adjust the protection disc if necessary.

What is the warranty period?

The warranty is 24 months from the date of purchase. Keep the receipt as proof.

Can I chop ice cubes or nuts?

No, this blender is not designed for chopping hard foods such as ice cubes, nutmeg, or large pieces of chocolate. This could damage the blade.

How to store the power cord?

Wind the cable around the groove on the motor unit before storing the appliance.

Can the appliance operate unattended?

No, never leave the appliance operating unattended. Always unplug it after use.

USER MANUAL UM 2620 E CLATRONIC

Exterior view of a modern kitchen blender with clear glass and black casing (no text or symbols visible)

UM 2620

Inhalt

Inhoud • Inhold • Sommaire • Indice • Índice • Indice

Contents • Spis treści • Obsah • Tartalom • Содержание

D Übersicht Bedienelemente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General safety instructions

• Before commissioning this device please read the instruction manual carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and, if possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the device or whenever a disturbance occurs. Switch off the device beforehand. Pull on the plug, not on the cable.
• In order to protect children from the dangers of electrical appliances, never leave them unsupervised with the device. Consequently, when selecting the location for your device, do so in such a way that children do not have access to the device. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similar qualified person.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors*).
• Under no circumstances must the device be placed in water or other liquid, or come into contact with such ^ . Do not use the device with wet or moist hands ^ .
• Should the device become moist or wet, remove the mains plug from the socket immediately ^* . Do not reach into the water.
• Use the device only for the intended purpose.

*) Please note the following „Special safety instructions...“.

Special Safety Instructions for this Machine

• The machine should only be used under supervision!
• Do not manipulate any of the safety switches!
• Do not remove the lid during operation.
• When mixing, keep your hands and other objects out of the jug!
• Attention, the cutting blades are extremely sharp! Handle with extreme care when using the appliance and when cleaning the blades!
  • Never pour liquids hotter than 60^ C into the jug!
• Never use the mixer when it is empty!
• Do not put hard foods such as ice cubes, nutmeg or large pieces of chocolate into the container! The blade can be damaged!

List of Parts

1 Knife block 5 Filler lid 9 Covering plate
2 Motor housing 6 Lid (with pin)
3 Rotary switch 7 Carafe 10 Sealing ring
4 Cable slot 8 Safety switch

Putting into operation

1. Before starting, make sure that the knob is positioned on „0“ and that the plug is not inserted.
2. Check the decanter. The blade block, the cover disc and the gasket must be mounted in the right order.
   See „Overview of Components“.
3. Place the decanter on the motor casing. The decanter must be positioned so that the safety pin of the transparent cover disc is located on the surface of the safety switch on the edge of the chromed casing.
4. Connect the plug to a duly installed 230V/50Hz socket.
5. Fill the ingredients into the decanter and cover with the lid. The lid must be fastened tightly. The decanter must be held firmly during the mixing.
6. For constant mixing (continuous mode):
   When operating in levels 1 or 2 snap the selector into the desired position:

$$ \text {Level 1 = low rpm} $$

$$ \text { Level } 2 = \text { high rpm } $$

Shift the selector to „0“ to switch off the appliance.

1. For pulse mode (mixing at brief intervals) shift the switch to „0“ position. The switch snaps into place. The appliance is off now. Turn the switch now to position „P“. The switch must be kept in this position for the desired interval. When the switch is released, it returns automatically to „0“ position.

2. Before putting the mixer away, wrap the cable around the slot on the motor casing.

Cleaning

Always disassemble the mixer after use. Wash and dry all the parts of the decanter.

Warning: The electric plug must be removed before the mixer is taken apart!

All the parts of the decanter can be washed in the uppermost rack of the dishwasher.

After cleaning and drying the decanter must be reassembled so that the gasket is located between the blade block and the decanter. See „Overview of Components“.

Before using each time the blade block must be screwed securely onto the decanter.

Dry the external surface of the mixer base with a moist cloth.

GB

Important notice on the safety switch

The all-purpose mixer is equipped with a safety switch that avoids that the motor run without the decanter mounted on it (danger of injury!).

When the decanter is mounted, the safety pin on the transparent cover disc presses against the safety switch of the motor casing. The all-purpose mixer can now be switched on. If the safety pin does not press correctly against safety switch, the motor does not run. For example, this is the case when the position of the transparent cover ring is changed when cleaning.

Make sure that the safety pin is in the right position. For right-handed users the safety pin must be located below the handle. For left-handed users the safety pin must be located below the pour spout.

This appliance conforms with the CE directives for radio interference suppression and low-voltage safety and has been built to meet current safety requirements. Subject to technical changes without prior notice!

Guarantee

We undertake to guarantee the appliance sold by our company for 24 months as of the date of purchase (cash receipt).

Within the guarantee period we rectify faults to the machine free of charge which result from material or manufacturing faults, either by repairing the machine or, or our discretion, by replacement. Any such repair or replacement associated with the guarantee shall not cause the guarantee period to be extended, nor be deemed to be the start of a new guarantee period!

Proof for the warranty is provided by the purchase document. The replacement and repair will not be performed free of charge without this proof of purchase.

Should the warranty be valid, please consign the complete appliance in its original packing together with the cash receipt to your local dealer.

Defects to the accessories do not entitle to the change of the appliance. These will be replaced free of charge. In this case do not send back the appliance. Just order the faulty accessory! Broken glass parts are replaced at the expense of the owner!

Neither defects to consumables and wearing parts (e.g. motor pistons, kneading hooks, drive belts, spare remote controls, spare toothbrushes, saw blades, etc.) nor the cleaning, maintenance or change of wearing parts fall under this warranty and hence are subject to payment of costs!

The warranty is terminated in case of handling on the part of Third parties.

After the warranty

Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service.

GB

PL