BY 52 - Baby products BEURER - Free user manual and instructions

USER MANUAL BY 52 BEURER

• Do not use the device if it shows signs of damage or does not function properly. In these cases, contact Customer Services.

• This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or know- ledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.

• Children must not play with the device.

• Keep the device and the connection cable away from children under the age of 3 years.

• Cleaning and user maintenance must not be performed by children unless supervised.

• Check that the device and the mains cable are in perfect working order before each usage. In the event of damage, the device must not be used.

• Any improper use can be dangerous.

• Keep packaging material away from children (danger of suocation).

• If the mains connection cable of this device is damaged, it must be disposed of. If it cannot be removed, the device must be disposed of.

• Always ensure that the device is securely positioned on a level surface. Risk of scalding through escaping liquids.

• Warning – the escaping steam is very hot! Dear customer, Thank you for choosing one of our products. Our brand stands for well-engineered, quality made products; driven by innovation and safety. Our product range encompasses a wealth of products for health and well-being in the heat, gentle therapy, blood pressure/diagnosis, weight, massage, beauty, air and babycare sectors. With kind regards, Your Beurer team. Functions of the device With this baby food warmer you can quickly heat up all sorts of baby food and drinks and keep them warm in an energy-ecient way. The device is suitable for all conventional baby bottles and jars. The device has the following functions:

• Rapid warming of baby food/drinks

• Keeps food/drinks constantly warm with exact entry of the desired temperature ENGLISH10

1. Included in delivery:

Check that the device packaging has not been tampered with and make sure that all contents are present. Be- fore use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

• These Instructions for Use

2. Signs and symbols

The following symbols are used in the Instructions for Use. WARNING Warning instruction indicating a risk of injury or damage to health IMPORTANT Safety note indicating possible damage to the device/accessory Product information Note on important information Read the instructions Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive – WEEE Manufacturer CE labelling This product satisfies the requirements of the applicable European and national directives.

PAP Dispose of packaging in an environmentally friendly manner Certification symbol for products that are exported to the Russian Federation and members of the CIS

3. Warnings and safety notes

Safety notices WARNING

• During the warming process, the water becomes hot (risk of scalding).

• Check the temperature of the food before the feed (risk of burning).

• Keep small parts out of reach of children.

• Make sure that cables are not accessible to children.

3. Warnings and safety notes ................................10

9. What if there are problems? ..............................13

• The device must only be used on a mains socket with a residual-current protective device (risk of electric shock).

• Unplug the mains cable after each usage and before any cleaning (risk of electric shock).

• Pull out the mains plug in the case of operational faults, before cleaning and when the device is not in use. IMPORTANT: To avoid damage to the device, please observe the following:

• Fill the device with water before switching it on.

• Do not operate the device outside.

• The device must only be used on an AC network and with the voltage specified on the type plate.

• Unwind the mains cable fully in order to avoid overheating.

• Keep the mains cable away from hot surfaces.

• Do not place the device on water-sensitive surfaces.

• Do not remove the mains plug from the socket by pulling on the cable!

• Do not pull, twist or bend the mains cable.

• Never submerge the device in water. Never rinse it in running water.

Do not use any additional parts that are not recommended by the manufacturer or oered as accessories. General advice

• Repairs must only be carried out by Customer Services or authorised suppliers. Do not open or repair the device yourself under any circumstances, otherwise its perfect functioning is no longer guaranteed. Failure to observe this will invalidate the warranty.

• If you should have any questions about using our devices, please contact either your retailer or Custo- mer Services.

The device is intended for use in the domestic/private environment only, not in commercial situations. Only use the device to warm up baby food/drinks and keep them warm. This device may only be used for the purpose for which it is designed and in the manner specified in the instructions for use. Improper use can be dangerous. The manufacturer is not liable for damage resulting from improper or careless use.

1. Before use, ensure that the device and accessories (including mains cable) do not have any visible damage.

2. Place the device on a firm, even surface.

3. Connect the mains plug to the socket. The power LED lights up. The device is ready for use.

Warming up baby food/drinks and keeping them warm:

1. Place the lifter in the baby food warmer and place the bottle or jar in the lifter.

Fill the container with sucient water depending on the size of the jar. Ensure that the water does not overflow. Starting the warming process:

1. Press button followed by the rapid heat-up button .

The warming time that is currently set now flashes on the display. On first use, the default setting of 15 mi- nutes is displayed. If the device remains plugged in after the first use, it shows the last entered warming time when subsequently used.

2. Enter the warming time (3 - 18 minutes). To do so, press the button repeatedly until you have reached the

desired warming time. The time is entered in minute increments; after “18”, the display begins again at “3”. The warming time is dependent on the initial temperature, the type and quantity of food/drink, the container material (glass/plastic) and the temperature of the water used to fill the device. The follow- ing table oers a guide to selecting the warming time for food/drinks to be warmed to 37°C. Duration 100 ml milk/chilled ~ 8 min. 250 ml milk/chilled ~ 14 min. 190 g puréed food/room temperature ~ 8 min.

3. Press the rapid heat-up button again to start the warming process.

The display now continuously shows the remaining warming time. The display starts to flash one minute before the end of the warming process. The warming process stops once the pre-specified warming time has elapsed. The heat LED and the display go out. Starting the warming process without prior warming:

1. Press the button to switch the device on. The current temperature is shown on the display. The default

2. To enter the temperature, press the button repeatedly until you have reached the desired temperature for

keeping the food/drink warm (between 35 °C and 85 °C). The temperature increases in the steps 37, 38, 40, 45, 50, 60, 70, 80 until the display reaches “85” and then begins again at 35 °C.

3. Now press the button again to start the keeping warm process.

Ending the warming/keeping warm process:

1. Press the button for 2 seconds.

The display and the heater are switched o.

2. Remove the bottle/jar using the lifter.

3. Unplug the mains cable after each usage, pour all the water out and dry the device with a cloth.13

• Shake the bottle or stir the food in the jar.

• Check that it is the correct temperature.

• To prevent the breeding of bacteria, which multiply fastest in the temperature range from around 32°C to 42°C, please use the heated baby food as soon as possible.

• We do not recommend keeping the food warm for any longer, as this can cause important vita- mins to be lost.

• For hygienic and microbiological reasons, do not reheat food that has already been heated.

• Take care not to overheat food/liquids.

8. Cleaning and maintenance

The service life of the device depends on its careful handling:

• To extend the service life of the device, we recommend that it is not (continuously) operated in the high temperature range.

• Use boiled or filtered water for warming baby food. This will reduce the build-up of lime scale.

• Unplug the device before cleaning.

• To clean the device, use only a damp cloth. Do not use any scouring agents or other cleaning products.

• Descale the device using vinegar or citric acid. Place the lifter in the device, mix 50 ml of household vinegar with 100 ml of cold water or a packet of citric acid with 200 ml of cold water and pour this solution into the device. Leave the solution to work until the lime scale has been removed; do not operate the device during this time. Pour the liquid away, rinse the device out thoroughly and finally dry it with a cloth.

• Descale the device approx. every four weeks.

9. What if there are problems?

Fault Cause Action Water leaks from the bottom of the device when in use. Device faulty Switch o the device immedi- ately, unplug it, let the water drain out and return the device to the retailer. The warming process does not start or does not end. Thermostat broken Switch o the device immedi- ately, unplug it, let the water drain out and return the device to the retailer. No LED display Mains plug not (correctly) plugged in or device faulty Check that the mains plug is (correctly) plugged in. If there is still no display, switch o the device, unplug it and return it to the retailer. The baby food warmer does not switch on once it is plugged in. No electricity Check that the mains plug is correctly plugged in. The temperature on the display does not increase once the warm- ing process is started; the device switches itself o after a while. No water in the device Unplug the device, let it cool down, then fill it with water and start the warming process as described in these instructions. The food is not warm at the end of the warming process. Not enough water in the device Unplug the device, let it cool down, then fill it with sucient water and start the warming process as described in these instructions.

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.14 Subject to error and change

11. Technical specifications

Operating voltage: 220–240 V ~ / 50/60 Hz Power consumption: 80 watts Heating time: 3 - 18 min. Temperature for keeping warm: 35 °C - 85 °C

12. WARRANTY / SERVICE

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warran- ty for this product, subject to the requirements below and to the extent described as follows. The warranty conditions below shall not aect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer. The warranty shall apply without prejudice to any mandatory statutory provisions on liability. Beurer guarantees the perfect functionality and completeness of this product. The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from the seller. The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use. German law shall apply. During the warranty period, should this product prove to be incomplete or defective in functionality in ac- cordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions. If the buyer wishes to make a warranty claim, they should approach their local retailer in the first in- stance: see the attached “International Service” list of service addresses. The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required. A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with - a copy of the invoice/purchase receipt, and - the original product. The following are explicitly excluded from this warranty: - deterioration due to normal use or consumption of the product; - accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries, cus, seals, electrodes, light sources, attachments and nebuliser accessories); - products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the inst- ructions for use, as well as products that have been opened, repaired or modified by the buyer or by a service centre not authorised by Beurer; - damage that arises during transport between manufacturer and customer, or between service centre and customer; - products purchased as seconds or as used goods; - consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions). Repairs or an exchange in full do not extend the warranty period under any circumstances.15 Lisez attentivement cette notice, conservez-la pour un usa- ge ultérieur, mettez-la à disposition des autres utilisateurs et suivez les consignes qui y figurent. AVERTISSEMENT