HWMS750 - Barre de son SAMSUNG - Free user manual and instructions

USER MANUAL HWMS750 SAMSUNG

HW-MS750 / HW-MS751 FULL MANUAL Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/registerENG - ii SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN.This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.This symbol indicates that this product has included important literature concerning operation and maintenance.Class II product : This symbol indicates that it does not require a safety connection to electrical earth (ground).AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information. WARNING

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture. CAUTION

• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not expose this apparatus to dripping or splashing. Do not put objects lled with liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.ENG - iii PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power requirements listed on the identication sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on ampliers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or equipment creating strong magnetic or electric elds. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or re. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specications. FULL MANUAL You can access the Full Manual on Samsung’s on-line customer support centre by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from the website. (http://www.samsung.com/support) Design, specications and App screen are subject to change without prior notice.ENG - iv CONTENTS 01 Checking the Components 2 Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 2 02 Product Overview 3 Front Panel / Right Side Panel of the Soundbar ------------------------- 3 Bottom Panel of the Soundbar ------------------------- 4 03 Connecting the Soundbar 5 Connecting Electrical Power

04 Connecting to your TV 7 Method 1. Connecting with a Cable

– Connecting using an Optical Cable

– Connecting a TV using an HDMI Cable

Method 2. Connecting Wirelessly

– Connecting a TV via Bluetooth

– Connecting via Wi-Fi

18ENG - v 07 Connecting an Amazon product 20 08 Controlling your Soundbar with an Amazon device 23 09 Using the Remote Control 24 How to Use the Remote Control

Output specications for the different sound effect modes

Assembling the Holder-Cable

SurroundVOL BASS SOUNDBAR SOUND MODE SMART MODE Soundbar Main Unit Remote Control / Batteries Power Cord Optical Cable Holder-Cable Screw

• For Soundbar wall mounting components, see page 29.

• See page 31 for instructions on how to use the Holder-Cable.

• To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care.

• The appearance of the accessories may differ slightly from the illustrations above. Inserting Batteries before using the Remote Control (AA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.ENG - 3

PRODUCT OVERVIEW Front Panel / Right Side Panel of the Soundbar

Right Side of the Soundbar Position the product so that the SAMSUNG logo is located on the top.

• When adjusted, the volume level appears on the Soundbar’s front display.

• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and hold the (Source) button for more than 5 seconds.

(Power) Button Turns the power on and off.ENG - 4

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio Setup menu of your TV. Refer to the owner’s manual supplied with your TV. Bottom Panel of the Soundbar Wi-Fi SETUP SPK ADDHDMI IN 2HDMI IN 1HDMI OUT(TV-ARC)POWER INPOWER OUT(For TV)WIRELESSAUX INDIGITAL AUDIO IN(OPTICAL) Wi-Fi SETUP SPK ADD WIRELESS AUX IN

POWER OUT (For TV) Connect the power cord of a Samsung TV connected to the Soundbar and mounted on the wall using a Wall Mount Kit (WMN300SB - not supplied).

DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.

WIRELESS Attach the wireless dongle that connects the Soundbar to surround speakers and a subwoofer wirelessly. (The surround speaker, subwoofer, and wireless dongle are sold separately.)

• The WIRELESS jack is not USB-compatible.

• The availability of subwoofers differs by area. Check the availability at http://www.samsung.com/support.ENG - 5

AUX IN Connect to the Analogue output of an external device. HDMI IN 1, HDMI IN 2Inputs digital video and audio signals simultaneously using an HDMI cable. Connect to the HDMI output of an external device. HDMI OUT (TV-ARC)Connect to the HDMI (ARC) jack on a TV. Wi-Fi SETUP / SPK ADD Connect to a wireless network (Wi-Fi) via the Samsung Multiroom app.

• When disconnecting the power cable from a wall outlet, pull the plug. Do not pull the cable.

• Do not connect this unit or other components to an AC outlet until all connections between components are complete.

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power

• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) HDMI IN 2HDMI IN 1HDMI OUT(TV-ARC)POWER INPOWER OUT(For TV)WIRELESSAUX INDIGITAL AUDIO IN(OPTICAL) POWER IN Bottom of the Soundbar Main UnitPower CordConnecting Electrical Power

(OPTICAL) POWER OUT (For TV) Bottom of the Soundbar Main Unit

• The POWER OUT jack is used to provide power to a Samsung TV mounted on the wall using a Wall Mount Kit (WMN300SB - not supplied).

• The POWER OUT jack can connect only to Samsung TVs that use a 2-pin power cord and consume 400 W or less. (Connecting the jack to a device that consumes more than 400 W may damage the Soundbar or cause a malfunction.) For a list of Samsung TVs that are compatible with the WMN300SB Wall Mount Kit and the POWER OUT jack, see the WMN300SB Wall Mount Kit user manual. You can view the manual on line at http://www.samsung.com/support.ENG - 7

04 CONNECTING TO YOUR TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to a selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. – When using optical cable, this feature can be supported by 2017 Samsung Smart TVs that support Bluetooth. – This function also allows you to use the TV menu to adjust the sound eld and various settings as well as the volume and mute. Method 1. Connecting with a Cable When broadcasting signals are Dolby Digital and the setting for “Digital Output Audio Format” is PCMon your TV, it is recommended to change the setting to Dolby Digital. When the setting is changed, youcan experience better sound quality. (The menu may differ depending on the TV manufacturer.) Connecting using an Optical Cable WIRELESS AUX IN DIGITAL AUDIO IN(OPTICAL)OPTICAL OUTOptical CableBottom of the Soundbar D.IN

Right Side of the Soundbar

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV

with a digital optical cable.

2. Press the (Source) button on the right side panel or remote control, and then select the “D.IN”

mode.Auto Power LinkAuto Power Link automatically turns on the Soundbar when the TV is turned on.1. Connect the Soundbar and a TV with a digital optical cable.

2. Press the (Source) button on the right side panel or on the remote control, and then select

3. Press the Left button on the remote control for 5 seconds to turn Auto Power

• Auto Power Link is set to ON by default. (To turn off this function, turn off Auto Power using the Soundbar.)

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “D.IN” mode. Connecting a TV using an HDMI Cable HDMI IN 1 HDMI OUT (TV-ARC) HDMI IN (ARC) HDMI Cable (not supplied)Bottom of the Soundbar Connect to the HDMI IN (ARC) port of your TV.Connect to the HDMI OUT (TV-ARC) port of the Soundbar main unit.Right Side of the Soundbar

1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the gure.

2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV

• If TV sound is inaudible, press the (Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.

• If “TV ARC” does not appear in the display window of the Soundbar main unit, conrm that the cable is connected to the correct port.

• Use the volume buttons on the TV’s remote control to change the volume of the Soundbar.ENG - 9 NOTES

• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.

• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.

• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.

• Anynet+ must be turned on.

• This function is not available if the HDMI cable does not support ARC. Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

• Only one TV can be connected at a time. The initial connection

1. Press the (Source) button on the right side panel or on the remote control, and then select “BT”.

2. Change “BT” to “BT PAIRING”.

• If “BT READY” appears, press and hold the (Source) button on the right side panel of the Soundbar or on the remote control for more than 5 seconds to display “BT PAIRING”.

4. Select “[AV] Samsung Soundbar MSxxx” from the list on TV’s screen.

An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV Bluetooth device list. To connect to the Soundbar, select the message and establish a connection.

• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

5. You can now hear TV sound from the Soundbar.ENG - 10

If the device fails to connect

• If the previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar MSxxx”) appears in the list, delete it.

• In “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side panel of the Soundbar or on the remote control to switch to “BT PAIRING” mode. Then, select “[AV] Samsung Soundbar MSxxx” from the TV’s search list. What are the BT READY and BT PAIRING statuses?

• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device.

• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote control.) NOTES

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.

• The Soundbar automatically turns off after 5 minutes in the Ready state.

• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: – If there is a strong electrical eld around the Soundbar. – If several Bluetooth devices are simultaneously paired with the Soundbar. – If the Bluetooth device is turned off, not in place, or malfunctions.

• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. Disconnecting the Soundbar from the TV Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”.

• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)

• To cancel automatic Bluetooth connection between the Soundbar and TV, press the p (Play/Pause) button on the remote control for 5 seconds in “BT READY” status. (Toggle On → Off)ENG - 11 Connecting via Wi-Fi Pre-connection Checklist

1. Conrm that your Samsung smart TV was released after 2014. This function is compatible only

with Samsung smart TVs released after 2014.

2. Make sure your Wireless router (Wi-Fi) is ready and working.

3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network).

Step 1 : Connecting the Soundbar to Wi-Fi

1. Press the (Source) button on the right side of the Soundbar or on the remote control to select

• When using selected Samsung TV (2016 or 2017 Samsung smart TVs that support Bluetooth.) – If you select “WIFI” mode when the TV is turned on, the TV screen displays a pop-up window providing instructions on how to automatically connect the Soundbar to a wireless router (Wi-Fi). Refer to instructions in the pop-up window of TV. WIFI

2. Connect your mobile device (smartphone, tablet etc.) to the Wi-Fi network the TV is connected to.

3. Install and launch the Samsung Multiroom app on your mobile device (smartphone, tablet etc.).

iOS Android Samsung Multiroom app

4. Follow the instructions in the app screen on the mobile device to connect the Soundbar to your

Wi-Fi network.ENG - 12 Step2:ConguringSettingsontheTV

• If the TV disconnects from your wireless network after you change the input source to the Soundbar, use the TV menu to connect the TV to the network again. For TVs released in 2017

For TVs released in 2016

For TVs released in 2015

For TVs released in 2014

• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).

• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi connection between the TV and Soundbar. Contact your Internet service provider for details.

Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an Optical or Analogue Audio (AUX) Cable WIRELESSAUX INDIGITAL AUDIO IN(OPTICAL)OPTICAL OUT- AUDIO - R L Optical CableAudio (AUX) Cable (not supplied)Bottom of the SoundbarBD / DVD player / Set-top box / Game consoleRight Side of the Soundbar

Optical Cable X Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable. Y Select “D.IN” mode by pressing the (Source) button on the right side panel or on the remote control.

Audio (AUX) Cable X Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable. Y Select “AUX” mode by pressing (Source) button on the right side panel or on the remote control.ENG - 14 Connecting using an HDMI Cable HDMI IN 1HDMI IN 2HDMI OUT(TV-ARC) HDMI OUT HDMI IN (ARC) HDMI Cable (not supplied)

1. Connect an HDMI cable (not supplied) from the HDMI IN 1 or HDMI IN 2 jack on the back of the

product to the HDMI OUT jack on your digital device.

2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the

product to the HDMI IN jack on your TV.

3. Press the (Source) button on the right side panel or on the remote control, and then select

Method 1. Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

• You cannot connect more than one Bluetooth device at a time. Bluetooth device The initial connection

1. Press the (Source) button on the right side panel or on the remote control, and then select

2. Change “BT” to “BT PAIRING”.

• If “BT READY” appears, press and hold the (Source) button on the right side panel of the Soundbar or on the remote control for more than 5 seconds to display “BT PAIRING”.

• When “BT PAIRING” mode, the blue LED on the right edge of the Soundbar will blink.

3. Select “[AV] Samsung Soundbar MSxxx” from the list.

• When a Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT” appears in the front display.

4. Play music les from the device, connected via Bluetooth, through the Soundbar.

If the device fails to connect

• If the previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar MSxxx”) appears in the list, delete it.

• In “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side panel of the Soundbar or on the remote control to switch to “BT PAIRING” mode. Then, select “[AV] Samsung Soundbar MSxxx” from the Bluetooth device search list.ENG - 16 What are the BT READY and BT PAIRING statuses?

• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device.

• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote control.) NOTES

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.

• The Soundbar automatically turns off after 5 minutes in the Ready state.

• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: – If there is a strong electrical eld around the Soundbar. – If several Bluetooth devices are simultaneously paired with the Soundbar. – If the Bluetooth device is turned off, not in place, or malfunctions.

• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

• The Soundbar supports SBC data (44.1kHz, 48kHz).

• Connect only to a Bluetooth device that supports the A2DP (AV) function.

• You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.

• Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar MSxxx” from the device’s scanned devices list will automatically change the Soundbar to “BT” mode. – Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)

• The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying “BT READY”.

• Soundbar cannot be paired to another Bluetooth device, while using the Bluetooth function.ENG - 17 Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual.

• The Soundbar will be disconnected.

• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the right side panel or on the remote control, and then change to any mode except “BT”.

• Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device)

• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. NOTES

• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.

• The Soundbar automatically turns off after 5 minutes in the Ready state. More About Bluetooth Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, if: – A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. – It is subject to electrical variation from obstructions caused by a wall, corner, or ofce partition. – It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

• Pair the Soundbar with the Bluetooth device while they are close together.

• The further the distance between the Soundbar and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.ENG - 18 Method 2. Connecting via Wi-Fi (Wireless Network)

• Connect a single Soundbar to Wi-Fi to access a variety of music streaming services and Internet radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or stereo sound mode.

• To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the Samsung Multiroom app is required. Mobile device The initial connection

1. Press the (Source) button on the right side of the Soundbar or on the remote control to select

2. Install and launch the Samsung Multiroom app on your mobile device (e.g. smartphone or tablet).

iOS Android Samsung Multiroom app

3. Follow the instructions in the app screen on the mobile device to connect the Soundbar to Wi-Fi.ENG - 19

Installing an additional Soundbar when Samsung wireless speakers are already in use

1. On the Home screen of the Samsung Multiroom app, select Settings ( ) at the top, and then

select “Add Speaker”.

2. To connect the Soundbar to 2 Samsung wireless speakers and congure a surround sound system,

follow the steps shown below. (You cannot set up a surround sound system using one audio device and one Soundbar.) X Touch to go to the list of all speakers. Y Touch on the right of the Soundbar model name. Z Touch Surround Setup. Select Done after dragging the speaker to the desired location. [ The Surround connection is complete. Soundbar NOTE

• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers from the Soundbar to disable the surround sound system. (If connecting the surround speakers without disconnecting SWA-9000S, sound is played via both the Samsung wireless speaker and the Surround speaker.)ENG - 20

07 CONNECTING AN AMAZON PRODUCT

Connect and use with an Amazon product (Amazon Echo) Use an Amazon Echo product to control your speakers and enjoy music services provided by Amazon Echo.

1. Install SmartThings app to your mobile device.

SmartThings app iOSAndroid

2. Launch the app and follow the instructions on the screen to register (add) your Soundbar in the

• Automatic pop-up may not be available in some mobile devices. If this is the case, select and complete “Add device” from the app menu . Your Soundbar is now added to the app. Launch App Add speakersAuto pop-upENG - 21

3. In SmartThings app, change your Soundbar name to one that can be recognized by your Amazon

device. (Example: Samsung, Soundbar, Living Room, Family Room, Bedroom, Ofce, etc.) CAUTION

• Amazon devices may not recognize names that contain elements such as special characters. SaveSelect Edit Select speakers Change name

4. In Alexa app, search “Samsung Wireless Audio” in Skills and select “ENABLE”.

• Skip this step if you have the Skills set up already. Select Skills Search Enable Amazon Alexa appENG - 22

5. From Smart Home tap in Alexa app, complete “Discover Device”.

1. Use voice commands to enjoy musics available on your Amazon device.

• The Amazon Echo service you can use with your speakers is limited to musics. Other services provided by Amazon Echo, such as news and weathers, can be accessed on your Amazon Echo product.

• This feature may not be available in some countries.

• This service is provided by Amazon and can be terminated at any time, Samsung does not assume responsibility of service availability. Use voice commands to control speakers. Trigger + Command + Speaker name Use the Speaker name you used when adding it to Alexa app. Action Voice Command To search an audio device added to the SmartThings account connected to the Amazon Alexa account "Alexa Discover devices"

• Use voice commands for speakers named “Living room” Action Voice Command To set the volume level to 5 "Alexa Set the volume to 5 on Living room" To increase the volume level "Alexa Volume up on Living room" To mute the sound "Alexa Mute on Living room" To listen to radio station named KISS FM "Alexa Play Kiss FM on Living room" To play the next song "Alexa Next song on Living room" To stop the audio "Alexa Stop on Living room" To turn the audio on "Alexa Turn on Living room" To turn the audio off "Alexa Turn off Living room"ENG - 24

09 USING THE REMOTE CONTROL

How to Use the Remote Control SurroundVOL BASSSOUNDBARSOUND MODE SMART MODE

Power Surround VOL BASS SOUNDMODESMARTMODE Turns the Soundbar on and off.

• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz, and 10KHz are selectable (Left/Right) and each can be adjusted to a setting between -6 to +6 (Up/Down).

• If the video and audio between the TV and your Soundbar are not synchronised, select SYNC in Sound Control, and then set audio delay between 0~300 milliseconds by using the Up/Down buttons.

• If surround speakers (not supplied) are connected, select REAR LEVEL and use the Up/Down buttons to adjust the volume within the -6 to +6 range. The REAR SPEAKER function can be turned ON/OFF by using the Up/Down buttons.

• SYNC is only supported in some functions.ENG - 25

Surround Surround VOL BASS SOUND MODE SMART MODE The Surround Sound function adds depth and a sense of space to sound. Each time you press this button, ON and OFF alternate.

• ON : Play sound over all the speakers.

• OFF : You can hear the sound of the original source channel from several speakers.

SOUND MODE Surround VOL BASS SOUND MODE SMART MODE You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE, SPORTS, or MOVIE. Select the “STANDARD” mode if you want to enjoy the original sound.

• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)

Surround VOL BASS SOUND MODE SMART MODE Source Press to select a source connected to the Soundbar.

• BT PAIRING mode To turn on “BT PAIRING” mode in “BT” mode, press and hold the (Source) button for more than 5 seconds. See page 15 for details.

• Auto Power Down Function The unit turns off automatically in the following situations. – D.IN / WIFI / BT Mode : If there is no audio signal for 5 minutes. – HDMI 1 or HDMI 2 Mode : If there is no audio signal for 15 minutes. – AUX Mode : – If the Audio (AUX) Cable is disconnected for 5 minutes. – If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected. (Auto Power Down function can be turned off only in that case.) – To turn off Auto Power Down function, while in “AUX” mode, press and hold the p button for 5 seconds. “ON-AUTO POWER DOWN” / “OFF-AUTO POWER DOWN” appears on the display.

Surround VOL BASS SOUNDMODESMARTMODE Up/Down/ Left/Right Press the indicated areas to select Up/Down/Left/Right. Press Up/Down/Left/Right on the button to select or set functions.

• Repeat To use the repeat function, press the Up button.

• Music Skip Press the Right button to select the next music le. Press the Left button to select the previous music le.

• Anynet+ / Auto Power Link You can turn Anynet+ and Auto Power Link on or off. Anynet+ and Auto Power Link are controlled by the Right and Left buttons respectively. – Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with the Samsung TV’s remote control. Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF. – Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF. – Anynet+ / Auto Power Link are set to ON by default.

Surround VOL BASS SOUND MODE SMART MODE SMART MODE Automatically optimises sound effects to suit the scene currently playing. The mode turns on or off each time the button is pressed.

Surround VOL BASS SOUNDMODESMARTMODE BASS SurroundSOUND MODE SMART MODE VOL BASS SOUNDBAR SurroundSOUND MODE SMART MODE VOL BASS SOUNDBAR Surround SOUND MODE SMART MODE VOL BASS SOUNDBAR Surround SOUND MODE SMART MODE VOL BASS SOUNDBAR Push the button up or down to adjust the BASS volume within the -6 to +6 range. To set the BASS volume level to 0, press the button.

• When a Subwoofer (not supplied) is connected, the BASS button switches to the Subwoofer Key. Push the button up or down to adjust the subwoofer volume either to -12 or within the -6 to +6 range. To set the subwoofer volume level to 0, press the button.ENG - 27

• Mute Press the VOL button to mute the sound. Press it again to unmute the sound. Adjusting the Soundbar volume with a TV remote control Use the TV menu to set the TV speaker on a Samsung TV to external speakers. (For more information, see the TV’s user manual.)

• After installing the Soundbar, you can adjust the Soundbar’s volume using the IR remote control that came with a Samsung TV. (If you do not want to use this function, when the Soundbar is on, press and hold the Surround button for 5 seconds. “OFF-TV REMOTE” appears in the Soundbar’s display and the function turns off.) To adjust the volume using only the Samsung TV remote control, press and hold the Surround button for more than 5 seconds until “SAMSUNG-TV REMOTE” appears in the Soundbar display. – Each time the Surround button is held for 5 seconds, the mode switches in the following order: “SAMSUNG-TV REMOTE” (Default mode) → “OFF-TV REMOTE” → “ALL-TV REMOTE”.

• To adjust the Soundbar volume with the remote control that came with a TV made by a third party manufacturer, turn the Soundbar on, press and hold the Surround button for 5 seconds (“OFF-TV REMOTE” appears on the Soundbar’s display), release the Surround button, and then press and hold the Surround button again for more than 5 seconds. (“ALL-TV REMOTE” appears on the Soundbar’s display.) – This function may not be available, depending on the remote control. – Manufacturers supporting this function: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCAENG - 28 Using the Hidden Buttons Hidden Button Reference page Remote Control Button Function Surround TV remote control On/Off page 27 (Source) BT Paring page 15 p (Play / Pause) Auto Power Down On/Off (AUX mode) page 25 Left Auto Power Link ON/OFF page 7 Right Anynet+ ON/OFF page 26 (Sound Control) 7 Band EQ page 24 SOUND MODE DRC ON/OFF (Standby) page 25 Outputspecicationsforthedifferentsoundeffectmodes Effect Input Output Except Wireless Rear Speaker Kit Include Wireless Rear Speaker Kit Surround Surround VOL WOOFER SOUND MODE Bluetooth POWER

• Top speaker is included in a channel.

• Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchased the Soundbar from.ENG - 29 10 SOFTWARE UPDATE When the Soundbar is connected to the Internet, software updates automatically occur even when the Soundbar is turned off.

• To use the Auto Update function, the Soundbar must be connected to the Internet. The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it. 11 INSTALLING THE WALL MOUNT Installation Precautions

• Install on a vertical wall only.

• Do not install in a place with high temperature or humidity.

• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point.

• Purchase and use the xing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, x the support screws into wall studs.

• Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on. – Diameter: M5 – Length: 35 mm or longer recommended.

• Connect cables from the unit to external devices before you install the Soundbar on the wall.

• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock. Wallmount Components 450mm Wall Mount Guide Holder-Screw (2 EA) Screw (2 EA) Bracket-Wall Mount

1. Place the Wall Mount Guide against the wall

• The Wall Mount Guide must be level.

• If your TV is mounted on the wall, install the Soundbar at least 5 cm below the TV. 5 cm or more

2. Align the Paper Template’s Centre Line with

the centre of your TV (if you are mounting the Soundbar below your TV), and then x the Wall Mount Guide to the wall using tape.

• If you are not mounting below a TV, place the Centre Line in the centre of the installation area. Centre Line 450mm

3. Use a sharp object, such as a pen or pencil, to

mark the holes’ positions, and then remove the Wall mount Guide. 450mm CENTER LINE

4. Using an appropriately sized drill bit, drill a

hole in the wall at each marking.

• If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use.

5. Push a screw (not supplied) through each

Holder-Screw, and then screw each screw rmly into a support screw hole.

6. Install the 2 Bracket-Wall Mounts in the

correct orientation on the bottom of the Soundbar, using 2 Screws.

• When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar Right end of SoundbarENG - 31

7. Install the Soundbar with the attached

Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall.

8. Slide the Soundbar down as shown below so

that the Bracket-Wall Mounts rest securely on the Holder-Screws.

• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that Bracket-Wall Mounts rest securely on the Holder-Screws. Assembling the Holder-Cable As shown in the image, use the supplied Screw to x the Holder-Cable to the Soundbar, and then use the Holder-Cable to organise any cables.

WIRELESSAUX INDIGITAL AUDIO IN

(OPTICAL) HDMI IN 1 HDMI IN 2 HDMI OUT (TV-ARC) POWER IN POWER OUT (For TV)ENG - 32 12 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ; See the Bluetooth connection sections on pages 9 and 15. Sound is not produced. Is the Mute function on? ; Press the VOL button to cancel the function. Is the volume set to minimum? ; Adjust the Volume. The remote control does not work. Are the batteries drained? ; Replace with new batteries. Is the distance between the remote control and Soundbar main unit too far? ; Move the remote control closer to the Soundbar main unit. Cannot connect to the TV. If connected via a wired network ; Check if the cable is connected correctly. (Check the port name to make sure that the cable is connected to the correct port.) (See the corresponding page regarding each connection method.) ; Press the (Source) button on the right side of the Soundbar or on the remote control to check if the mode is correct. If connected via a wireless network ; Connected via Bluetooth

1. Switch the Soundbar to “BT PAIRING”

mode, and then use the TV to search again. (See page 9 for details.) ; Connected via Wi-Fi

1. Check if the TV is a compatible model.

• Only Samsung smart TVs released after 2014 are supported.

2. Check if the TV is connected to Wi-Fi.

• If the TV is not connected to Wi-Fi, use the network menu on the TV to establish a connection. (See the TV user manual.)ENG - 33

3. Check if the Soundbar is connected to

• When connected, the Soundbar is found in the list of speakers when Samsung Multiroom app is run on the mobile device (e.g. smartphone or tablet). (See page 18 for details.)

4. Check for a DFS channel.

• If your wireless router (Wi-Fi) is using a DFS channel, you cannot establish a Wi-Fi connection between the TV and Soundbar. Contact your Internet service provider for details. 13 LICENCE Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• The Spotify Software is subject to third party licences found here : www.spotify.com/connect/third-party- licenses.

• For more information about Spotify Connect, please visit www.spotify.com/ connect 14 OPEN SOURCE LICENCE NOTICE For further information on Open Sources used in this product, please visit the website: http://opensource.samsung.comENG - 34

15 IMPORTANT NOTES ABOUT SERVICE

• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

• An administration fee may be charged if either (a) an engineer is called out at your request and there is no defect with the product (i.e. where the user manual has not been read). (b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user manual has not been read).

• You will be informed of the administration fee amount before a technician visits.

16 SPECIFICATIONS AND GUIDE

Specications GENERAL Weight

• Samsung Electronics Co., Ltd reserves the right to change the specications without notice.

• Weight and dimensions are approximate.

• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)ENG - 35 Precaution : The product will restart automatically if you turn on/off Wi-Fi/Ethernet. Overall Standby Power Consumption (W) (All the network ports are “ON” condition) 3.7W Wi-Fi/Ethernet Port deactivation method Press Wi-Fi SETUP button on the product for 30 seconds to turn Wi-Fi/Ethernet On / Off. Bluetooth Port deactivation method Press SPK ADD button on the product for 30 seconds to turn Bluetooth On / Off.

• Hereby, Samsung Electronics, declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.samsung.com go to Support > Search Product Support and enter the model name. This equipment may be operated in all EU countries. The 5GHz WLAN(Wi-Fi or SRD) function of this equipment may only be operated indoors.ENG - 36 [Correct disposal of batteries in this product] (Applicable in countries with separate collection systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. For information on Samsung’s environmental commitments and product specic regulatory obligations e.g. REACH, WEEE, Batteries, visit: http://www.samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.htmlBUL - ii ИНФОРМАЦИЯ ЗА БЕЗОПАСНОСТ МЕРКИ ЗА БЕЗОПАСНОСТ ЗА ДА НАМАЛИТЕ РИСКА ОТ ТОКОВ УДАР, НЕ СВАЛЯЙТЕ КАПАКА (ИЛИ ЗАДНИЯ КАПАК). ВЪТРЕ НЯМА ЧАСТИ, ПРЕДНАЗНАЧЕНИ ЗА ОБСЛУЖВАНЕ ОТ ПОТРЕБИТЕЛЯ. ЗА СЕРВИЗНО ОБСЛУЖВАНЕ СЕ ОБРЪЩАЙТЕ КЪМ КВАЛИФИЦИРАН СЕРВИЗЕН ПЕРСОНАЛ.

WIRELESSAUX INDIGITAL AUDIO IN

• Ако безжичният ви рутер (Wi-Fi) използва DFS канал, не можете да установите Wi-Fi връзка между телевизора и Soundbar. Свържете се с интернет доставчика си за подробности. 13 ЛИЦЕНЗ Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

• Se il router wireless (Wi-Fi) sta utilizzando un canale DFS, non sarà possibile stabilire una connessione Wi-Fi tra la TV e la Soundbar. Per ulteriori informazioni, mettersi in contatto con il proprio provider di servizi Internet. 13 LICENZA Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

WIRELESSAUX INDIGITAL AUDIO IN

12 PROBLĒMU NOVĒRŠANA

Operating Temperature Range

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN

• Dacă routerul dvs. wireless (Wi-Fi) utilizează un canal DFS, nu puteți stabili o conexiune Wi-Fi între televizor și sistemul Soundbar. Pentru detalii, contactați furnizorul de servicii Internet. 13 LICENŢĂ Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

WIRELESSAUX INDIGITAL AUDIO IN

• Ako vaš bežični ruter (Wi-Fi) koristi DFS kanal, nećete moći da uspostavite Wi-Fi vežu između televizora i uređaja Soundbar. Za detalje kontaktirajte dobavljača internet usluga. 13 LICENCA Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

WIRELESSAUX INDIGITAL AUDIO IN

WIRELESSAUX INDIGITAL AUDIO IN