HP4651 - Lisseur PHILIPS - Free user manual and instructions

USER MANUAL HP4651 PHILIPS

• Keep page 3 and pages 46 and 47 open when

reading these operating instructions.

Your new Philips Profile Volume & Shape has been specially designed to give beautiful styling results. It is

quick and easy to use. We hope you will enjoy using your Profile Volume & Shape - the hairstyler with

which you can create almost any desired hairdo.

In order to get the best results, please read the instructions carefully before use. Also refer to the

illustrations on the fold-out pages.

• Remember, a good haircut is the basis for a

• The Profile Volume & Shape is most effective

when the hair is slightly damp. After washing,

dry your hair in the normal way until it is damp.

Then begin using your styler. When the hair is

dry, slightly dampen it with water.

• Before styling, brush or comb your hair to

ensure that it is untangled.

• Prevent the hair from becoming too dry.

Overdrying may result in frizzy hair ends which

• The results you can obtain with the Profile

Volume & Shape depend upon various factors,

for example the thickness, length and structure

of your hair. Experimenting with the attachments

will allow you to discover the styling possibilities

for your particular hair type and will help you

determine how to achieve the best results.

• When using the Large Vent Brush, make sure it

does not get tangled in your hair. Don’t rotate

the brush for more than 1.5 turns. Keep the

brush away from the head when you remove it

from the hair to avoid picking up any underlaying

• You can remove the attachment from the hair as

soon as the hair feels dry. The time needed to

dry the hair depends on the thickness of the hair

and the amount of hair being styled.

• Use position || (maximum position) when you

When the hair gets dryer, you can switch back to

For a longer-lasting result, set the Profile

Volume & Shape to the "Cool air" (1) position for

a few seconds before removing the brush from

your hair. The cool air will fix your wave or curl

so that your style will last longer.

• Always switch the appliance off before removing

and/or affixing the attachments.

C Large Oval Cushion Brush

| = Gentle warm air flow for easy styling

|| = Stronger and warmer air flow for fast

H Release button for detaching attachments

- Align the attachment with

the styler, making sure

attachment are in line

with the arrows on the

styler. Press to fit (fig. 2).

- While pressing the

release button, pull the

direction of the arrow

The Shape Style Brush is suitable for straight and

wavy hair of any length, especially for medium to

long hair. Its special design with vented hollow

center ensures that the warm air is directed

directly into your hairdo. The bobble-tipped pins

provide good grip on the hair. The heated metal

plate on the back and front of the brush ensures

optimum styling and “volume”. For a longer lasting

result you can apply some mousse before styling

- Insert the Shape Style Brush into the hair. Brush

against the direction of the hair growth, touching

the scalp with the brush. Then rotate the

attachment away from the head (fig. 4). The hair

will be lifted and fall lightly back onto the head. In

this manner you add maximum volume and body

• If the hair is still damp you can hold the Shape

Style Brush still for a moment, before you rotate

it away from the head to remove it.

• You can also add volume to long hair by holding

your head down and brushing the hair with the

Volume & Shape in this position.

Making waves in medium to long hair

- Switch on the appliance. Take the ends of the

hair (fig. 5) and wind the brush around the tress

in the desired direction (fig. 6). The resulting

shape of the wave depends on the thickness of

- As soon as the hair is warm to the touch, remove

the hot air brush from the hair by rotating it away

- Leave the curls or waves to cool down, before

finishing by combing, brushing or fingercombing

the hair into its final style (fig. 7).

Making curls in short to medium hair

- Divide the hair (fig. 8) into tresses, using a comb.

Do not take too much hair in one tress.

- Switch on the appliance. Wind the hair around

the brush in the desired direction (fig. 9). When

using the large vent brush, make sure it does not

get tangled in the hair. Therefore, do not rotate it

in the hair more than 1,5 turn.

Ensure that the hair is wound up so that it is at

right angles to the scalp (fig. 10). This will give

your hair optimum lift and volume.

As soon as the hair is warm to the touch, remove

the brush from the hair.

Making waves in long hair

- Switch on the appliance. Take the ends of the

hair (fig. 11) and wind them around the brush in

the desired direction (fig. 12). The resulting

shape of the wave depends on the thickness of

- As soon as the hair is warm to the touch,

carefully remove the hot air brush from the hair.

- Leave the curls or waves to cool down, before

finishing by combing, brushing or fingercombing

the hair into its final style (fig. 13).

To remove the brush from the hair

- Carefully rotate the styler in the opposite

direction, just far enough to release the hair

without spoiling the curl. Be careful not to pick up

underlying hairs because this could cause the

brush to get stuck in hair.

• Large Oval Cushion Brush

- This brush is especially suitable for longer hair

for grooming and shaping. The bobble-tipped

bristles protect the hair; they won’t pull it, won’t

scratch your scapula and they can be used to

very gentle brush the tangles out while blowing

warm air through the hair to smoothen it. The

brush will glide through your (wet) hair,

preventing tugging and helping to remove knots.

- To create root lift use the Cushion brush; insert

the pins in your hair until it touches your scapula.

- Starting from the front, brush backwards and

forwards across the centre parting (fig. 14).

- To groom the hair and have a straight finish, lift

the hair at the roots on the sides of your head,

and follow down the hair lengths with the styler

(fig. 15). This technique will tame stray ends and

help promote shine and softness (fig. 16).

The brushes can be cleaned with a small brush or

The appliance can be hung

from the hanging loop

• Before connecting the appliance, check that the voltage indicated on the type

plate corresponds to the local mains voltage.

• Do not use this product near water in e.g. baths, washbasins, sinks. If the

product falls into water, unplug it immediately and dispose of it. It must not be used again.

• Always ensure that the attachments are completely dry (on the inside as well as the outside!)

before affixing them to the styler.

• Always switch the appliance off before putting it down, even if it is only for a moment.

• For additional protection, the installation of a residual current device (RCD) with a rated

residual operating current not exceeding 30 mA is advisable in the electric circuit supplying

the bathroom. Ask your electrician for advice.

• Even when the appliance is switched off, the electricity has not been cut off. Always pull out

the mains plug when the appliance is not being used.

• Never obstruct the air inlet grille.

• This product is equipped with an automatic overheating protection device. If the appliance

overheats, it will switch off. Unplug the appliance. After cooling down for a few minutes, the

appliance can be used again. Before switching back on again, check the air inlet grille for

possible blockage by fluff, hair, etc. If in doubt, consult your dealer or an Authorised Philips

• Check the condition of the mains cord regularly. Do not wind the mains cord around the

• The mains cord of this appliance cannot be replaced. If the cord is damaged, the appliance

should be discarded.

• For examination or repairs always return the appliance to an Authorised Philips Service

Centre. Unqualified repair work can be dangerous for the user.7

Votre nouveau Profile Volume & Shape Philips a été spécialement conçu pour vous permettre de