SalonStraight Want2Move HP4646 - Hair Straightener PHILIPS - Free user manual and instructions

Product Type	Hair Straightener
Brand	Philips
Model	SalonStraight Want2Move HP4646
Plate Material	Ceramic
Temperature Range	150°C - 230°C
Heat-up Time	Approximately 30 seconds
Auto Shut-off	Yes, after 60 minutes
Swivel Cord	Yes, 1.8 m
Voltage	110-240 V, 50/60 Hz
Power Consumption	Approximately 45 W
Dimensions (L x W x H)	28 x 30 x 3.5 cm
Weight	0.35 kg
Cord Length	1.8 m
Plate Size	25 x 90 mm
Features	Adjustable temperature, LED display, floating plates, salon-style results
Care & Cleaning	Unplug and wipe with a damp cloth; do not immerse in water
Warranty	2 years
Replaceable Parts	None (integrated design)
Color	Black / Pink

Frequently Asked Questions - SalonStraight Want2Move HP4646 PHILIPS

How do I adjust the temperature on my Philips HP4646 straightener?

Use the temperature control buttons (+ and -) located on the handle. The LED display shows the set temperature. It ranges from 150°C to 230°C.

What is the best temperature setting for fine hair?

For fine or thin hair, use a lower temperature between 150°C and 180°C to avoid damage. Start low and increase if needed.

How long does it take to heat up?

The Philips SalonStraight Want2Move HP4646 heats up in about 30 seconds, ready for quick styling.

Does this straightener have an auto shut-off feature?

Yes, it features an automatic shut-off after 60 minutes of inactivity for safety.

How do I clean the plates?

Unplug the device and let it cool. Wipe the ceramic plates with a damp cloth. Do not use abrasive cleaners or immerse in water.

Can I use this straightener on wet hair?

No, always use on dry hair. Using on wet hair can cause damage and electric shock.

What is the cord length?

The cord is 1.8 meters long with a swivel base for easy maneuverability.

Is the HP4646 suitable for travel?

Yes, it operates on 110-240V and has a lockable mechanism. However, you may need a plug adapter for different countries.

How do I store the straightener?

Allow it to cool completely, then store in a dry place. Avoid wrapping the cord tightly around the device.

What does the LED display show?

The display shows the current temperature setting. It also indicates when the device is heating up and when it's ready.

USER MANUAL SalonStraight Want2Move HP4646 PHILIPS

Register your product and get support at www.philips.com/welcome

HP4646

PHILIPS

Diagram of a folded folding panel with grid patterns and directional arrows indicating movement (no text or symbols)

ENGLISH 6

INDONESIA 12

한국어 18

BAHASA MELAYU 24

PORTUGUÊS DO BRASIL 30

ภาษาไทย 36

TIÊNG VIÊT 41

繁體中文 47

简体中文 52

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

This new Philips SalonStraight Want2Move straightener provides ultra-fast shiny straight styles, combining professional performance with purse-size portability.

The ceramic-coated plates ensure ultra-smooth gliding through the hair, allowing you to style at high temperatures in a quick and caring way. The slimline design enables you to achieve straightness from the roots and versatility in styling from pin curls to flicks.

General description (Fig. 1)

A Ceramic-coated plates
B Folding system
C On/off slide with power-on light
D Easy-lock system
E Swivel cord with cord holder
F Travel pouch

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

- Keep the appliance away from water. Do not use it near or over water contained in baths, washbasins, sinks etc. When you use the appliance in a bathroom, unplug it after use. The proximity of water presents a risk, even when the appliance is switched off.

Warning

• Check the condition of the mains cord regularly. Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.

• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.
• Keep the appliance away from non-heat-resistant surfaces and never cover the appliance with anything (e.g. a towel or clothing) when it is hot.
• Keep the appliance away from flammable items.
• Never leave the appliance unattended when it is plugged in.

Caution

- For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.

- The straightening plates and the plastic parts near the plates reach a high temperature quickly. Prevent the hot surfaces of the appliance from coming into contact with your skin.

- Only use the appliance on dry hair.

- Do not leave the appliance in your hair for more than a few seconds at a time, to prevent damage to your hair.

- The maximum temperature occurs just after heating up. The actual temperature during use may be lower.

- The straightening plates have a ceramic coating. This coating slowly wears away over time. This does not affect the performance of the appliance.

- Keep the straightening plates clean and free of dust, dirt and styling products such as mousse, spray and gel. Never use the appliance in combination with styling products.

- Do not use the appliance on artificial hair.

- If you use the appliance on colour-treated hair, the straightening plates may stain.

- Do not use the appliance for any other purpose than intended.

- Always unplug the appliance after use.

ENGLISH8

• Wait until the appliance has cooled down before you store it.
• Do not wind the mains cord round the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

General

- This appliance is suitable for mains voltages from 100 to 240 volts.

Using the appliance

Straightening

Straighteners are powerful styling tools and must always be used with care.

As with all straighteners that reach salon high temperatures, do not use the appliance frequently to avoid damage to the hair. If you use the straightener incorrectly, you could overheat your hair or even burn it. Always follow the steps below.

1 Put the mains plug in the wall socket.
Note: This appliance has an internal dual voltage mechanism that automatically adjusts to the required voltage. Therefore it can easily be used abroad. Use a plug adapter suitable for the wall sockets in the country you visit to connect the appliance to the mains.
2 Push both folding system buttons simultaneously (1) and unfold the straightener (2). (Fig. 2)
Note: Always make sure the straightener is fully extended when you use it.
3 To unlock the straightening plates, turn the easy-lock system anticlockwise until the plates open (Fig. 3).
4 Press the on/off slide upwards.

The power-on light goes on to indicate that the straightener is heating up.
The plates heat up rapidly and are ready for use within seconds.

5 Comb or brush your hair so that it is disentangled and smooth (Fig. 4).

6 Use a comb to divide the hair into sections. Do not put too much hair in one section.

Tip: It is better to section off the crown area and to straighten the hair underneath first, followed by the top area.

7 Take a section that is 3-4cm wide. Place it between the straightening plates and press the handles of the appliance firmly together.

8 Slide the straightener down the length of the hair for 5 seconds, from root to hair end, without stopping to prevent overheating (Fig. 5).

9 Repeat this process after 20 seconds until you have achieved the desired look.

10 Let your hair cool down. Do not comb or brush it before it has cooled down, as this could ruin the hairstyle you have just created.

Note: Always make sure the appliance is either fully extended or fully folded when not in use.

Cleaning

Never immerse the appliance in water or any other liquid, nor rinse it under the tap.

1 Switch off the appliance and unplug it.
2 Let the appliance cool down completely on a heat-resistant surface.
3 Clean the appliance with a damp cloth.

Storage

Do not wind the mains cord round the appliance.

1 Switch off the appliance and unplug it.
2 Let the appliance cool down completely on a heat-resistant surface.
3 Hold the handle and turn the easy-lock system clockwise to lock the straightening plates (Fig. 6).
4 Press both folding system buttons simultaneously (1) and fold the straightener (2) (Fig. 7).
5 Place the folded straightener in the heat-resistant pocket of the pouch for easy portability or storage. (Fig. 8)

You can use the cord holder to fold the cord and keep it in place.

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 9).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Customer Care Centre in your country.

Problem Possible cause Solution
The appliance does not work.	There is a power failure or the socket to which the appliance is connected is not live.	Check if the power supply works. If it does, plug in another appliance to check whether the socket is live.
	You have not switched on the appliance.	Push the on/off slide upwards to switch on the appliance.
	The mains cord is damaged	If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.

Pendahuluan