SR 4348 BT - Cd player/recorder AEG - Free user manual and instructions

USER MANUAL SR 4348 BT AEG

D Bluetooth CD Radio

FCD-Radio Bluetooth

E Radio CD Bluetooth

ICD-Radio Bluetooth

GB Bluetooth CD Radio

bouton (Lecture/Pause) (13)

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

Warns of dangers for your health and indicates potential risks of injury.

CAUTION:

Indicates potential dangers for the device or other objects.

NOTE:

Highlights tips and information for you.

General Safety Guidelines

Before using this device, carefully read this user manual and keep it together with the Warranty Certificate, cashier receipt and if possible, the original package inclusive its interior packing. If you hand on the device to any third person, include the user manual as well.

• To avoid the risk of fire or electric shock, you should not expose the device to rain or humidity. Do not use the device near water (e.g. bathroom, swimming pool, humid cellars).
• Do not use the unit in extremely hot, cold, dusty, or damp places.
  The unit is designed solely for private use and its intended purpose. This unit is not designed for commercial use.
  Make sure that the power cable is not bent, pinched, or comes into contact with heat sources.
  Make sure that the power cable is not a tripping hazard.
• Never touch the mains plug or the cord with wet hands.
  Always connect the unit to a properly installed plug socket. Be sure the device voltage corresponds to the grid voltage.
  The mains plug must always be easily accessible.
  Always install batteries in the correct direction.
• Avoid covering the device's vent openings.
  This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus.
• Open sources of fire, such as e.g. burning candles may not be placed onto the unit.

English 21

• Never open the device's case. Improper repairs can cause severe danger to the user. If the device or particularly the power cord is damaged, don't use the device any further and have it repaired by a qualified specialist. Check the power cord regularly for damages.
• To avoid any danger, a damaged power cord must be replaced only by the producer, its customer service or a similarly qualified person with an equal cord.
• If the device won't be used over an extended period of time, disconnect the power cord and remove the batteries.

These symbols may be found on the device and shall indicate the following:

The lightning symbol warns the user of dangerously high voltages inside the case.

The exclamation mark symbol points to important instruction or maintenance remarks in the accompanying guidelines.

Devices with this symbol work with a "Class 1 laser" for scanning the CD. The integrated safety switches shall prevent the user from getting exposed to dangerous laser light not visible to him when the CD tray is opened.

These safety switches shall not be bridged nor manipulated in any case, otherwise there is a danger of them exposing themselves to the laser light.

Children and disabled persons

For the safety of your children, keep any packing parts (plastic bags, cartilage, Styrofoam etc.) out of their reach.

WARNING!

Don't let small children play with foils for danger of suffocation!

This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge unless they have been given supervision or instructions concerning the use of the device by a person responsible for their safety.
Supervise children to ensure they do not play with the device.

Special safety Guidelines

This device works with a class 1 laser.

22 English

Overview of the Components

1 USB Connection
2 Battery compartment
3 Operating mode switch (CD/USB; Radio; Bluetooth/AUX).
4 Mono/Stereo selector switch
5 AUX input 3.5mm
6 On/Off switch
7 230V connection
8 Carrying handle
9 CD tray
10 Loudspeakers.
11 Open CD tray
12 Stop button
13 button (replay/pause)/Automatic search radio
14 button Search forwards/Radio station +
15 Volume knob
16 Display
17 Ktution search run backwards/Radio station -
18 PRG button/Tuning +
19 Repeat button/Tuning -
20 Receiving antenna

Putting the device into operation/ Implementation

• Carefully read the operating instructions before the commissioning.
• Select a suitable location for the device and the loud-speakers. Ensure an even and non-slip surface.
  Take care to provide sufficient ventilation for the device.

Power supply

• Plug the mains plug into the properly installed wall socket, 230V , 50Hz .
• Ensure that the mains voltage corresponds with the type plate.
• The device can alternatively also be equipped with 6 C batteries. For this purpose, slide open the battery compartment in direction of the arrow and insert the batteries with the correct polarity. Then reclose the battery compartment.

WARNING:

Do not expose the batteries to any high heat input such as direct sunlight, for example. There is a risk of explosion.

CAUTION:

Unequal batteries or new and spent batteries may not be used together.
- Batteries must not be disposed off in the household waste. Please dispose of spent batteries at the appropriate collection points or return them to the distributor.

Transport lock CD tray

• Open the CD tray (2) by pressing button (19).

• Remove the transport lock from the CD player, if present, before commissioning.

• Close the CD tray by pressing the button (19).

General operation

On/Off switch (6)

You will turn the device on (I) and off (O) with this button.

Volume MIN/MAX (15)

Use this turning knob to adjust the volume to your individual needs.

USB connection (1)

This device has been developed according to the latest state of the technical developments in the USB field. The large number of different USB storage media of any kind that are offered nowadays do unfortunately not guarantee that a full compatibility with all the USB storage media is ensured. It is for this reason in rare cases that it can result in problems when replaying USB storage media. This is not an error function of the device.

To start the USB replay, proceed as follows:

• Turn the device on.
• Slide the operating mode switch (3) to the "CD" position.
• Keep the button pressed down until "USB" is shown in the display.
  Connect a USB storage medium with music files.
  Press the button (13) to start the replay.

For more operating options please refer to the chapter Playing CDs/MP3.

Listening to radio

To restart the radio replay, proceed as follows:

• Turn the device on.
  Slide the operating mode switch (3) to the "Radio" position.
• Set the desired station with the buttons Tuning +/-. The frequency will thereby be shown in the LCD display (16).
• The display (ST) is shown in the LCD display during an optimal reception of the station. Reposition the antenna in case of bad radio reception. Should the radio reception be disturbed by static, you can reset the replay to mono operation with the switch (4).
• Start automatic station search with the buttonPlay/ Pause (13)/Station search.

Playing CDs/MP3

Replay of a CD

To play back an audio CD, please proceed as follows:

• Turn the device on.
• Slide the operating mode switch (3) to the "CD" position
• Open the CD tray (9) by slightly pressing on the right front (11).
• Insert a CD into the device with the label on top. Ensurdows: that the CD locks in on the centring taper.
• Close the CD tray (9) by pressing it shut until it locks into place.

When the CD is inserted, the total number of the CD titles will be displayed. The display will also show you whether it pertains to an audio CD or an MP3 CD. If you press the button (replay/pause) (13), the replay will start. To remove a CD, please proceed as follows:

• Press stop button (12).
• Open the CD tray (11) by slightly pressing on the front right (11).
• Carefully remove the CD from the centring taper.
• Close the CD tray.

NOTE:

If you insert a CD upside down or if it is not readable, then the display will read "no".

The replay of self-produced CD's can not be guaranteed due to different burn programs and storage media.

Description of the CD buttons

▶ button (Replay/Pause) (13)

By pressing this button during the replay you may stop the replay. If you press the button again, the replay will continue.

buttons (Search run forward/backwards) (14/17) With these buttons you can affect the music replay in the CD/USB mode.

You can use thb button to skip a title and to change to the next title.To do this, please proceed as follows:

Press the button briefly to skip to the next title.
- By pressing down and holding the button, the music search is activated. The title is not changed but is wounding forward in fast forward mode.

With the button you wil proceed as follows:

• Pressing it 1 × , will change it to the start of the current title.
• By pressing it 2x , it will change to the previous title.
• Pressing it 1 × and holding it down will activate the music search run backwards.

REPEAT (19) button

This button enables you to set different options of music replay. To do this, proceed as follows:

• Pressing 1 × repeats the current title until the function is deactivated. "ONE" will be shown in the display.
• Pressing 2x will replay the entire CD until the function is deactivated. "ALL" will be shown in the display.

If the button is pressed again, the function is deactivated again. The replay will run in the normal mode.

Programmed playback

Allows the programming of any desired order of selections. To program the order of selections, please proceed as fol

• Insert a music medium (Audio - CD / MP3 - CD/ USB)
• stick)
• Press the PRG (18) button. "001" will appear in the display.
  Now select the requested title with the buttons (14/17).
• Press the PRG (18) button again. "002" will appear in the display
• Select another title.
• Proceed the same way with the further programming.
• You will start the playback with button (13).

To delete the programming, press button (12).

Bluetooth Streaming/AUX

To playback music through the Bluetooth or AUX, please proceed as follows:

• Slide the operating mode switch (3) to the "Bluetooth/AUX" position.
• Pair your music output device with Bluetooth with the device. The Bluetooth password of the device is "0000". You may alternately connect the music output source by using a 3.5mm jstereo jack plug with the AUX terminal (11) of the device.

Select the desired music titles.

Start the playback.

NOTE:

Before you start the replay, ensure a moderate output volume of the music source and of the device. Adjust the volume later on.

Cleaning and maintenance

To clean the device, please proceed as follows:
e. Separate the device from the mains.
- Wipe the outer surfaces of the device with a dry towel, without any cleaning additives.

Troubleshooting

Symptoms Cause	Solution
CD can not be played back.	CD has not been inserted correctly.	Ensure that the CD has been inserted correctly.
CD skips during the playback.	CD is dirty. Clean	the CD with a soft, dry towel.

24 English

Symptoms Cause	Solution
No audio signal during Bluetooth playback.	Device not paired correctly.	Perform the pairing one more time.
	Device out of range.	Reduce the range.
No playback of music.	No error noticeable.	e. Contact Custom Service.
No playback from the USB stick.	USB stick not compatible.	Replace the USB stick with a different one.
Bad radio reception.	Unfavorable reception position	Change the direction of the antenna or reposition the device.
		Switch to MONO operation.

Technical Specifications

Model . SR 4348 BT

Power supply 110-240 V, 50/60 Hz

Power Consumption. 10 W

Protection class

Net weight 1.2 kg

Frequency range. UKW/FM 87.5 108.0 Mhz

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the "Wheelie Bin" Symbol

Take care of our environment, do not dispose of electrical.
applicances via the household waste.

Dispose of obsolete or defective electrical appliances via municipal collection points.

Please help to avoid potential environmental and health impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of old electric and electronic appliances.

Your municipality provides you with information about collecting points.

GARANTIE-KARTE