CMS4104N - Built-in oven SMEG - Free user manual and instructions

USER MANUAL CMS4104N SMEG

INSTRUCTION MANUAL AUTOMATIC BUILT-IN COFFEE MACHINE FI Important warnings are identified by these symbols.

Failure to observe the instructions could result in electric shock, serious injury, burns, fire or damage to the appliance. Danger! Failure to observe the warning could result in possibly life threatening injury from electric shock. Important! Failure to observe the warning could result in injury or damage to the appliance. Danger of burns! Failure to observe the warning could result in scalds or burns. Please note: This symbol identifies important advice or information for the user.

SAFETY Fundamental safety warnings

The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance. Designated use: this appliance is designed and made to prepare coffee and milk based beverages and hot water. Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance. The surface of the heating element remains hot after use and the outside of the appliance may retain the heat for several minutes

FOR EUROPEAN MARKETS ONLY:

This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazard involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and 8

Clean all the components thoroughly, taking particular care with parts in contact with the coffee and milk. Cleaning and user maintenance shall not be made by children without supervision. Never immerse the appliance in water. CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent This is an household appliance only. It is not intended to be used in: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. If the plug or power cable is damaged, it must be replaced by customer services only to avoid all risk. Appliances with removable cord: avoid splashes of water on the power cord connector or socket at the back of the appliance. WARNING: Models with glass surfaces: do not use the appliance if the surface is cracked.

INTRODUCTION Symbols used in these instructions

supervised. Keep the appliance and its cord out of the reach of children aged less than

8 years. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. When not in use and before cleaning, always unplug the appliance.

Important! Do not hold on to the coffee machine when it is out of the cabinet.

Do not rest recipients containing liquids or inflammable or corrosive materials on top of the appliance. Place the accessories required to make the coffee (the measure for example) in the special holder. Do not rest large objects which could obstruct movement or unstable objects on the appliance. Do not allow children and animals to stand or stay close to the appliance when it is pulled out from the cabinet. Do not leave the machine out of the cabinet when it is in use. Do not leave the machine out of the cabinet when it is not needed. Install the machine according to the instructions in the booklet so that there are no spills when it is pulled out from the cabinet. Important! Do not use the appliance when extracted. Make sure the appliance is inactive before extracting it. The only exception is adjusting the coffee mill which must be done with the machine extracted (see section “Adjusting the coffee mill”).

Surfaces marked with this symbol become hot during use (the symbol is present in certain models only).

Please note: Use original or manufacturer recommended accessories and spare parts only.

Danger! This is an electrical appliance, it is therefore important to respect the following safety warnings:

• Never touch the appliance with damp hands. • Never touch the plug with damp hands. • Make sure the socket used is freely accessible at all times, enabling the appliance to be unplugged when necessary. • Unplug directly from the plug only. Never pull the power cable as you could damage it. • To disconnect the appliance completely, place the main switch (A23) on the side of the appliance in the 0 position. • If the appliance is faulty, do not attempt to repair. Turn it off using the main switch (A23), unplug from the mains socket and contact Customer Services.

Important! Never turn off the machine during desca-

This appliance is designed and made to prepare coffee and heat drinks. All other use is considered improper.

This appliance is not suitable for commercial use. The manufacturer is not liable for damage deriving from improper use of the appliance. This appliance can be installed over a built-in oven if the latter is fitted with a cooling fan at the rear (maximum microwave power: 3 kW).

Cleaning and maintenance of materials in contact with food

Important! Keep all packaging (plastic bags, polystyrene foam) away from children.

CHOKING HAZARD. The appliance might contain small parts. Some of those small parts might be required to get disassembled during cleaning and maintenance operations. Handle with care and keep small parts out of reach of children.

Danger of burns! This appliance produces hot water and steam may form while it is in operation.

Avoid contact with splashes of water or hot steam. Use knobs and handles.

The first time you use the appliance, or if it is not used for more than 3 or 4 days, rinse all removable accessories which may come into contact with water or milk with hot water.

If the appliance is not used for more than 3 or 4 days, before making the first beverage, rinse the water circuit as described in this Instruction for Use. You should carry out automatic cleaning and guided maintenance scrupulously when proposed by the appliance through the display or the lights described in the manual. Fill with fresh drinking water.

Empty the water tank if the appliance not to be used for a long time (holidays etc.).

Replace the water if the appliance has not been used for more than two days.

a column and the column must be firmly fixed to the wall with commercially available brackets.

Installing the appliance

Installation must be performed by a qualified professional in compliance with legislation in force in the country of installation (see section “Built-in installation”).

The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of children.

Never install the appliance in rooms where the temperature may drop to 0°C or lower. Customise the water hardness as soon as possible following the instructions in the “Water hardness” section.

Connecting the appliance

Danger! Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the bottom of the appliance.

Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional. To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm must be installed. Do not use multiple sockets or extensions.

Important! Safety cutout devices must be included in the mains power supply in compliance with the installation regulations in the country concerned.

This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.

The appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.

BUILT-IN INSTALLATION Verify the minimum measurements required for correct installation of the appliance. The coffee machine must be installed in

Important: all installation or maintenance operations must be performed with the appliance disconnected from the mains electricity supply. Kitchen furniture in direct contact with the appliance must be heat resistant (65°C min). To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements in figure 1). Position the rails on the sides of the cabinet as shown in the figure 2. Fix with the screws provided, then extract them completely. If the coffee machine is installed over a warmer drawer, use the top surface of this as a reference to position the rails (fig. 2A). In this case, there will be no surface to rest the rails on and the retaining hook must not be installed. Fix the power cable with the clip (fig. 3). The power cable must be long enough to allow the appliance to be extracted from the cabinet to fill the coffee bean container. The appliance must be earthed in compliance with legislation. Electrical connections must be performed by a qualified electrician following the instructions. Place the appliance on the runners (Only after they have been secured to the cabinet. This is to prevent the machine from being placed on an unsuitable surface), making sure that the pins engage properly in their seats when securing it with the screws provided (fig. 4). If the height of the appliance requires adjusting, use the spacer disks provided. If necessary, correct alignment of the appliance by positioning the spacers supplied under or at the sides of the support (fig. 5-6). To lift the appliance in the front (max 2 mm), turn the latch as shown in figure 7. The mounting panel for the runners must be of a suitable thickness for the fixing screws provided. The panel material must be suitable for the weight of the machine, approximately 25kg.

INSTALACJA W ZABUDOWIE