ZHC92341XA - Kitchen hood ZANUSSI - Free user manual and instructions

USER MANUAL ZHC92341XA ZANUSSI

Warning sign with exclamation mark and two gloves, commonly used in safety or hazard prevention context

50 cm 65 cm 90°

graph TD
    A["Top: Air Fan Icon"] --> B["Left Block"]
    B --> C["Right Block"]
    C --> D["Bottom Block"]
    D --> E["Left Arrow"]
    D --> F["Right Arrow"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333
    style F fill:#fcc,stroke:#333

Architectural floor plan diagram with labeled rooms and directional arrows indicating movement or flow

2x 6x Ø 8x40 6x Ø 5x45 4x Ø 2,9x6,5 2x 1x 1x 1x

Ø 150 mm 2x 1x

Type 20 LONG LIFE Type 15

Diagram illustrating a house interior installation with labeled components and directional arrows indicating assembly or movement.

Technical diagram illustrating a mechanical assembly with labeled components and directional arrows, including a magnified inset showing assembly details.

180 3

4

5 min. 500 mm min. 650 mm 5

Diagram showing a tool in a kitchen with labeled components and a numbered section, including a house icon and a grid of circular cutouts.

2x 2x 7

2x 2x 10 8

9 2x

10 2x 2x

Ø150 Ø200

11

2X Ø 2,9x6,5 12

13

14

2X Ø 2,9x6,5 15

16.1-Type 20 16.2-Type 20 16 16.3-Type 20 16.1-Type 20 Type 15

Diagram illustrating a ceiling-mounted device with labeled components and directional arrows, including a magnified inset showing the top view.

AVVERTENZE

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of two hand gestures: one with open lock, the other with closed lock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

COMANDI

Illustration of a hand holding a screwdriver, a small bowl, and a circular dial with an arrow (no text or symbols)

CAUTION

Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. The extractor hood has been designed exclusively for domestic use.

Warning! Do not connect the appliance to the mains until the installation is fully complete.

Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply.

Always wear work gloves for all installation and maintenance operations.

The appliance is not intended for use by children or persons with impaired physical, sensorial or mental faculties, or if lacking in experience or knowledge, unless they are under supervision or have been trained in the use of the appliance by a person responsible for their safety. This appliance is designed to be operated by adults, children should be monitored to ensure that they do not play with the appliance. This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance.

Never use the hood without effectively mounted grating!

The hood must NEVER be used as a support surface unless specifically indicated. The premises where the appliance is stalled must be sufficiently ventilated, when the kitchen hood is used together with other gas combustion devices or other fuels. The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels. The flaming of foods beneath the hood itself is severely prohibited.

The use of exposed flames is detrimental to the filters and may cause a fire risk, and must therefore be avoided in all circumstances.

Any frying must be done with care in order to make sure that the oil does not overheat and ignite.

Accessible parts of the hood may become hot when used with cooking appliance.

With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the local authorities.

The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH).

This must be completed in accordance with the

maintenance instructions provided in this manual). Failure to follow the instructions provided in this user guide regarding the cleaning of the hood and filters will lead to the risk of fires.

Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks.

We will not accept any responsibility for any faults, damage or fires caused to the appliance as a result of the non-observance of the instructions included in this manual.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol 📊. Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked

with the symbol ⚡ with the household waste.

Return the product to your local recycling facility or contact your municipal office department for household waste or the shop where you purchased this product.

USE

The hood is designed to be used either for

exhausting or filter version

INSTALLATION

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.

Warning! Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 50cm from electric cookers and 65cm from gas or mixed cookers. If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

MAINTENANCE

ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. The cooker hood should be cleaned regularly (at least with the same frequency with which you carry out maintenance of the fat filters) internally and externally. Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. DO NOT USE ALCOHOL!

Warning! Failure to carry out the basic cleaning recommendations of the cooker hood and replacement of the filters may cause fire risks. Therefore, we recommend observing these instructions.

The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

Grease filter - The grease filter must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Charcoal filter - Type 20 LONG LIFE - Washable activated charcoal filter

The charcoal filter can be washed once every two months using hot water and a suitable detergent, or in a dishwasher at 65^ C (if the dishwasher is used, select the full cycle function and leave dishes out). Eliminate excess water without damaging the filter, then remove the mattress located inside the plastic frame and put it in the oven for 10 minutes at 100^ C to dry completely. Replace the mattress every 3 years and when the cloth is damaged.

Type 15 - NON-washable activated charcoal filter

The saturation of the charcoal filter occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter. In any case it is necessary to replace the cartridge at least every four months.

The charcoal filter may NOT be washed or regenerated.

(1*)

Mechanical component diagram showing a downward arrow pressing into a rectangular block (no text or symbols)

(2*)

Technical diagram of a mechanical housing or enclosure with mounting holes and internal components (no text or symbols)

(3*) (4*)

(4**)

Illustration of two hand gestures: one with a lock and the other with a padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

CONTROLS

The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.

1. ON/OFF lighting
2. OFF motors
3. • 1. • 1. Minimum suction power (3.), medium (4.), maximum (5.).

Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

LIGHTING

Disconnect the hood from the electricity.

Warning! Prior to touching the light bulbs ensure they are cooled down.

Replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for a G-4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions and do not touch new light with bare hands.

Illustration of a hand holding a screwdriver, cleaning a circular component, and a compass with an arrow (no text or symbols)

ATTENTION

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, showing two states of lock state (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

COMMANDES

Illustration of a hand holding a screwdriver, a small blue object, and a circular dial with a pointer (no text or symbols)

WARNUNG

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock and lock, with no text or symbols present.

(*) Type 20
(**) Type 15 - Type 20

BEDIENELEMENTE

Illustration of a hand holding a small component, a screwdriver, and a circular dial with a pointer (no text or symbols)

WAARSCHUWING

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Wasbaar koolstofffilter

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical component with internal structure and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, no text or symbols present

(*) Type 20
(**) Type 15 - Type 20

BEDIENINGSELEMENTEN

Illustration of a hand holding a screwdriver, a small blue component, and a circular dial with a pointer (no text or symbols)

ADVERTENCIAS

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical housing or enclosure with mounting holes and internal components (no text or symbols)

(3*) (4**)

(*) Type 20
(**) Type 15 - Type 20

MANDOS

Illustration of a hand holding a small object, a screwdriver, and a circular dial with an arrow (no text or symbols)

ADVERTÊNCIAS

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Filtro de carvão acrivolavável

Technical diagram of a mechanical assembly with a downward arrow and mounting holes (no text or symbols)

(2*)

Technical diagram of a mechanical housing or enclosure with internal components and mounting holes (no text or symbols)

(3*) (4*)

(4**)

Illustration showing two hand gestures: one with a lock and padlock, the other with an open lock and padlock.

(*) Type 20
(**) Type 15 - Type 20

COMANDOS

Illustration of a hand holding a screwdriver, a small bowl, and a circular dial with an arrow (no text or symbols)

ΠΡΟΗΔΟΠΟΙΗΣΕΙΣ

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Technical diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

(2^*)

Technical diagram of a mechanical housing or enclosure with internal components and mounting holes (no text or symbols)

(3*) (4**)

(*) Type 20
(**) Type 15 - Type 20

ΧΕΙΡΙΣΤΗΡΙΑ

Illustration of a hand holding a magnifying glass with a circular inset showing the eye (no text or symbols)

ВНИМАНИЕ!

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical component with internal structure and mounting holes, no text or symbols present

(3*) (4*)

Illustration of two hand gestures: one with a lock and one with an open padlock, both without any text or symbols.

(*) Type 20
(**) Type 15 - Type 20

ОРГАНЫ УПРАВЛЕНИЯ

Illustration of a hand holding a screwdriver, a small blue object, and a circular dial with an arrow (no text or symbols)

DIKKAT

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Yıkanabilir aktif karbon filtre

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

(*) Type 20

(4**)

(**) Type 15 - Type 20

KONTROLLER

Illustration of a hand holding a small component, a screwdriver, and a compass with an arrow (no text or symbols)

اعtbارات ببئية

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Kolfilter - Type 20 LONG LIFE - Aktivt kolfilter som kan rengöras

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical component with mounting holes and internal structure (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open lock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

KOMMANDON

Illustration of a hand holding a small object, a tool, and a compass with an arrow (no text or symbols)

ADVARSEL

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Vaskbart aktivt kullfilter

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical component with internal structure and mounting holes, no text or symbols present

(3*) (4*)

Illustration showing two hand gestures: one with a lock and the other with an open padlock, both pointing at a lock.

(*) Type 20
(**) Type 15 - Type 20

KONTROLLER

Illustration of a hand holding a screwdriver, a close-up of a small component, and a circular dial with a pointer (no text or symbols)

TURVALLISUUSTIETOA

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Mechanical component diagram showing a downward arrow and mounting base (no text or symbols)

(2*)

Technical diagram of a mechanical housing or enclosure with mounting holes and internal components (no text or symbols)

(3*) (4*)

(4**)

Illustration of a hand holding a padlock with keys, no text or symbols present

(*) Type 20
(**) Type 15 - Type 20

OHJAIMET

Illustration of a hand holding a screwdriver, a close-up of a small component, and a circular dial with a pointer (no text or symbols)

ADVARSEL

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical or electronic component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration showing two hand gestures: one with a lock and the other with an open padlock, both pointing at a lock.

(*) Type 20
(**) Type 15 - Type 20

BETJENING

Illustration of a hand holding a small component, with a screwdriver and a compass-like device nearby (no text or symbols)

OSTRZEŻENIA

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of two hand gestures: one with open padlock and another with closed padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

STEROWANIE

Illustration of a hand holding a small component, a screwdriver, and a compass with an arrow (no text or symbols)

FIGYELMEZTETÉS

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical component with internal structure and mounting holes, no text or symbols present

(3*) (4*)

Illustration of two hand gestures: one with a padlock, the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

KEZELŐSZERVEK

Illustration of a hand holding a screwdriver, cleaning a circular component, and a compass with an arrow (no text or symbols)

AVERTISMENTE

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Filtru cu carbon activ lavabil

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

COMENZI

Illustration of a hand holding a small component, a screwdriver, and a compass with an arrow (no text or symbols)

! UPOZORENJA

Strogo se pridržavajte uputstava koje donosi ovaj priručnik. Otklanjamo bilo kakvu odgovornost za eventualne nezgode, smetnje ili požar na aparatu koji proizlaze iz nepoštivanja uputstava koje donosi ovaj priručnik. Kuhinjska napa je projektirana isključivo za kućansku uporabu.

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Mechanical component diagram showing a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and a dashed line indicating a trajectory (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

NAREDBI

Illustration of a hand holding a screwdriver, a close-up of a small component, and a circular dial with a pointer (no text or symbols)

UPOZORNENIA

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical housing or enclosure with internal components and mounting holes (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock, the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

OVLÁDAČE

Illustration of a hand holding a screwdriver, cleaning a circular component, and a compass with an arrow (no text or symbols)

VÝMĚNA ŽÁROVEK

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical component with mounting holes and internal structure (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open lock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

PŘÍKAZY

Illustration of a hand holding a screwdriver, a small blue object, and a compass with an arrow (no text or symbols)

OPOZORILA

Strogo se držite navodil iz tega priročnika.

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Pralni filter z aktivnim ogljem

Mechanical component diagram showing a downward arrow and mounting base (no text or symbols)

Diagram of a device casing with internal components and a dashed line indicating a trajectory or path (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

UPRAVLJALNI GUMBI

Illustration of a hand holding a small component, a screwdriver, and a compass-like device (no text or symbols)

VËREJTJE

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical or electronic component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

KOMANDIMET

Illustration of a hand holding a small bowl, a screwdriver, and a compass with an arrow (no text or symbols)

ПРЕДУПРЕЖДЕНИЯ

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical housing or enclosure with internal components and mounting holes, no text or symbols present.

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, showing two states of lock state (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

УПРАВЛЕНИЯ

Illustration of a hand holding a small component, a screwdriver, and a circular dial with an arrow (no text or symbols)

ВАЖНИ СОВЕТИ

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical or electronic component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration of a hand holding a padlock with a lock, showing two states of locking (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

КОНТРОЛИ

Illustration of a hand holding a small component, a screwdriver, and a compass with an arrow indicating direction (no text or symbols)

! УПОЗОРЕЊА

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical or electronic component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, no text or symbols present

(*) Type 20
(**) Type 15 - Type 20

КОМАНДЕ

Illustration of a hand holding a screwdriver, with a magnifying glass and a small blue object nearby (no text or symbols)

! OHUABINÕUD

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Pestav aktiivsöefilter

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical component with internal structure and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock with a lock, showing two states of locking (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

JUHIKUD

Illustration of a hand holding a small component, a screwdriver, and a circular dial with a pointer (no text or symbols)

ПОПЕРЕДЖЕННЯ ПО

БЕЗПЕЦІ

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Technical diagram of a mechanical housing or enclosure with internal components and mounting holes (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with an open padlock (no text or symbols)

(*) Type 20
(**) Type 15 - Type 20

ЕЛЕМЕНТИ КЕРУВАННЯ

Illustration of a hand holding a small component, with a screwdriver and a compass-like device nearby (no text or symbols)

ECKEPTY!

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a mechanical or electronic component with internal structure and mounting holes (no text or symbols)

(3*) (4*)

Illustration of two hand gestures: one with a lock and the other with a padlock, both without any text or symbols.

(*) Type 20
(**) Type 15 - Type 20

БАСКАРУ ЭЛЕМЕНТТЕРИ

Illustration of a hand holding a small component, a screwdriver, and a compass-like device (no text or symbols)

DROŠĪBAS BRĪDINĀJUMI

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Aktivo oglu filtrs ir mazgājams

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, showing two different states (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

VADĪBAS ELEMENTI

Illustration of a hand holding a small component, a screwdriver, and a compass with an arrow (no text or symbols)

SAUGOS TAISYKLÈS

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Type 20 LONG LIFE - Plaunamas aktyviosios anglies filtras

Diagram of a mechanical component with a downward arrow and mounting holes (no text or symbols)

Diagram of a device casing with internal components and mounting holes, no text or symbols present

(3*) (4*)

Illustration of a hand holding a padlock with an open lock, showing two different states (no text or symbols present)

(*) Type 20
(**) Type 15 - Type 20

VALDYMAS

Illustration of a hand holding a screwdriver, a close-up of a small component, and a circular dial with a pointer (no text or symbols)

CE