CP7320 - Hair clippers SOLAC - Free user manual and instructions

USER MANUAL CP7320 SOLAC

Congratulations on having chosen a SOLAC brand product. Our products are designed and manufactured to more than satisfy the expectations of our most demanding customers for a long time. SOLAC domestic appliances also provide the peace of mind of having passed the strictest quality and safety standards.

This product meets the requisites of European Electromagnetic Compatibility Directive 89/336/EEC and European Low Voltage Directive 73/23/EEC.

Electrodomésticos SOLAC, considering its drive for continuous improvement, hereby reserves the right to make changes without prior notice.

1 Safety Instructions

• Read these instructions completely before using your appliance.
• This appliance is only for domestic use, not professional use. Using it in any way other than according to the instructions could be hazardous.
• Remove all elements from the inside or outside of the appliance used for protection during transport or for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers.
• Always keep the appliance and its packaging out of reach of children and the disabled. When you use it in their presence, be extremely cautious.
• This appliance is not designed to be used by people (including children) whose physical, sensory or mental capacities are impaired or who lack experience or knowledge, unless they are supervised or have received instructions on how to use the appliance by a person who is responsible for their safety.
• Children must be supervised to ensure that they do not play with the appliance.
• Do not modify or repair the appliance. In there is any problem with the cord or any other part of the appliance, do not use it and take it to an authorised service centre.
• If the power cord is damaged, it must be replaced by the manufacturer or the manufacturer's after-sales service or by similarly qualified personnel to prevent possible hazards.

• Do not use parts or accessories not supplied or recommended by SOLAC.

• Before plugging in the appliance to the mains, check that the indicated voltage matches the voltage in your home.

• Always unplug the appliance after use and before removing or installing parts and before performing any maintenance or cleaning task. Also unplug it in the event of a power outage. When you plug in or unplug the appliance, it must be turned off.
• Do not pull on the power cord or hang the appliance by the cord. Always unplug the appliance by pulling on the plug, never the cord.
• Never leave the appliance exposed to the elements.

The appliance complies with internationally approved IEC safety standards and can be used safely in the bath or shower with the charger (10) unplugged.

• Avoid splashing water on the charger or the power cord.
• Use only the supplied charger to charge the appliance.
• Never submerge the charger or the hair clipper in water or any other liquid, or place them in a dishwasher. Do not allow the charger to come into contact with water during cleaning.
• Do not touch the charger with wet hands when it is plugged in.
• Never leave the charger working on a wet surface or cloth.
• If you use the appliance without any guide combs, be careful not to injure your skin.
• If the blade or the guide combs show signs of breakage or damage, stop using the appliance and repair them before using it again.
• The blades must be clean and have no traces of hair to work properly. Therefore, use the attached brush (17) to clean them before and after use.
• Electrodométricos SOLAC S.A. hereby disclaims all liability for injuries or damage that could be caused to persons, animals or property due to the failure to heed with these warnings.

2 Description

Main parts

1 Main body of the appliance
2 Speed selector switch
3 Adjustable handle
4 Handlefasteningbutton
5 Adjustable cutting head

6 Cutting blades
7 Comb guide fastening tabs
8 Charge connector
9 Charge pilot light
10 Charger
11 Guide combs for normal cut (2 mm, 4 mm, 6 mm, 8 mm)
12 Guide comb for 2-mm combined cut
13 Guide comb for 0-mm cut
14 Guide combs for the ear area (side guide combs)
15 Guide comb for thinning very thick hair (reduction comb)
16 Comb
17 Cleaning brush
18 Lubricating oil

Electrical characteristics

Charger power supply voltage: 230V , 50 Hz

Ergonomic design

The advanced design of this appliance allows a person to comfortably cut his own hair around his whole head, even in difficult areas such as the nape of the neck or the sides of the head. To do so, it has an adjustable handle (Fig. 1) and an adjustable head (Fig. 2) so that you never have to force your wrist.

In addition, with the charger disconnected, it can be used in places where there is water, such as the shower.

3 Preparing the appliance

Recharging the batteries

The hair clipper includes batteries for operating without the power cord. Whenever the batteries are discharged, they must be charged using the supplied charger (10).
Any repairs or battery replacements should be performed by an Authorised Technical Service.

Use only the supplied charger. Do not use any other.

1 Place the switch (2) in the "0" position.
2 Connect the charger cable to the appliance's connector (8)
3 Plug the charger into the mains. The charge pilot light (9) will light up red.
4 The charge time is approximately 12 hours. The charge pilot light (9) will light up green when it is fully charged.

5 After charging, unplug the charger from the mains and then unplug the cable from the connector (8). The appliance is ready to be used.

A 12-hour charge provides approximately 50 minutes of operation.
When charging, the charger heats up slightly. This is normal, unless it becomes very hot.

Recommendations for extending the life of the batteries

The hair clipper has an electronic circuit for charging the batteries correctly, which extends their useful life. However, it is advisable to follow the advice given below.
- Do not leave the charger connected for long periods of time. Disconnect it when it has finished recharging.
- Do not use the hair clipper with the cord plugged in when the batteries are completely charged.
- Do not store or recharge the appliance close to radiators or other sources of heat, or expose it to direct sunlight.
- Do not recharge the appliance in dirty or wet places, and room temperature should be between 0^ and 40^ .
- Every few months, allow the batteries to drain completely and then recharge them. To discharge them, turn the appliance on without the cord until it stops running, then put the switch (2) in the "0" position. Then recharge the batteries as explained above.

4 Use

This appliance is designed to cut human hair. Do not use it for other purposes.
If you use the hair clipper in the shower, do so without the charger. Do not submerge either the clipper or the charger under water.

Operation with the cord or with the batteries

• You can use the hair clipper with the batteries or with the charger. If the batteries are discharged completely, leave the appliance plugged in for 5 minutes with the switch in the "0" position before using it. It is not advisable to use the appliance with the charger if the batteries are completely discharged.

Do not use the appliance with the charger when near bathtubs, sinks, showers or other recipients that may contain water. If it falls into water, do NOT try to pick it up. Unplug it immediately.

Before starting to cut

1 Untangle your hair and comb it in its natural direction.
2 Fit the desired guide comb (Fig. 3). If you are not sure which guide comb to use, select the comb for the longest cut (8 mm) and test it.

Guide combs with special effects

• Combined guide comb (12): it allows combing two different cutting levels. To do so, you must first cut your hair using a normal guide comb (such the 4-mm guide comb) and then use the 2-mm combined guide comb (12). Since it has more tines than the normal guide comb, it only cuts a certain quantity of hair. You will thus be able to combine 2-mm hair with other hair that is cut longer (for example, 4 mm).
• Reduction guide comb (15): it is used for very short hair, and it allows you to thin out your hair. A more natural effect is thus achieved for people with very thick hair.

Cutting the hair on the nape of the neck (Fig. 4)

1 Start at the centre of the nape of the neck while holding the clipper against your head with the teeth pointing upwards. Keep the clipper resting against your head and cut a little at a time.
2 While cutting, lean the clipper head slightly towards you. Continue cutting at the back of the head, from the nape of the neck up to above the ears.

Cutting the hair at the sides

• Trim the sideburns and the area around the ears in an upward direction.
• You can use the side guide combs (14).

Cutting the hair on the top of the head (Fig. 5)

1 Begin cutting at the front of the head and move towards the back. It is advisable to start by leaving your hair a bit longer until you are familiar the length of each guide comb.
2 Comb your hair frequently to detect any irregularities in length and to remove hair that is already cut.

Final touch (Fig. 6)

• To get a straight line on the sideburns and around the ears, remove the guide comb and place the clipper in the inverted position at a right angle to the head, with the blades in contact with the skin, and move the clipper downwards.

When the clipper is used without the guide comb, it cuts hair flush to the skin. Be careful not to injure your skin.

5 Cleaning and upkeep

Do not use solvents, detergents or abrasive products.

1 Unplug the appliance.
2 Use a dry cloth to clean the outside.
3 Clean the cutting blades (6) using the supplied cleaning brush (17). Remove the blades as shown in Fig. 7.
4 After each use, lightly lubricate the cutting blades (6) with the lubricating oil (18). Storage
- When the appliance is not being used, unplug it and store it in a cool, dry place.
- To prevent the cable from becoming damaged, do not twist it, pull it or wind it around the appliance. If it is damaged, have it replaced immediately by qualified personnel.

6 Recycling

When you decide to dispose of the appliance, you must first remove the batteries as described below.

1 Unplug the appliance and turn it on until the batteries are completely discharged.
2 Remove the batteries and deposit them in an appropriate container.

The batteries used in this appliance are Ni-MH batteries, therefore they must be recycled or disposed of according to local laws and regulations. NEVER throw batteries in containers for household rubbish.

3 Deposit the appliance in an appropriate container.

IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your home for processing. You will thus be helping to care for the environment.

FRANÇAIS

fr

Cher client :

3 PoiDroTOBka Ha yCTpoiCTBOTO

IopctpnrbaHe Ha Kocata Ha rohpHaTa Yact Ha rnaBata (ΦnR. 5)

1 3anoyhe Te noctprnBaHTo OT npedHaT auct Ha rnaBata n ce npuDnKbAte KbM 3aHaTa. IpenOpBuHTeJHo e da 3anOuyTe KaTO OCTaBtTe Kocata CN MaNKo NO-dblra DOKaTO YCBOnTe DJIKNHaTa Ha BCEKINBOeU rpe6aH.
2 PeuTe YecTo KocTa Cn, 3a Da HamePHTe BCNUKn HepaBHOCTN B DbJxHATA n 3a Da OTcPaHNTe OTp3aHaTBeue Koca.

DobbpiHTeHH npOeUpyn (ΦIr. 6)

3aДаПОЛУСИТЕправинна ЛINHAHaбakeнбардenteи OKOLNo yuInTe, OTCpaHete BODEUINr rpebeH n NOCTaBeTe MaUNHKata 3a NOcSTpRgBaH e B O6paTHO ПОLOXKeHne B DeCHNЯ bIbN Ha TnAbata,C HOKOBe B KOHTaKT C KOKaTaNpUdBnKBaYeMaUNHKaTa HADONY.

Koama mawunkama 3a nodcmpuaeane ce u3noJ3ea 6e3 eodeuc apebeH, mpeke koca hapaBHO cbc koxama. Bhumasaume da He HapaHume eawama koxa.

5 NocntBaHe NpOdpbXka

He u3non3eaume pa3pedumenu, noucmuau npenapamu unu abpa3ueHu npodykmu.

1 N3knioye ypeja.
2 I3non3BaIte Cyxa TbKaH, 3a da ro nouchnte OTbH.
3Почисте ржшпгу HOЖОBE(6) KaTOИЗПЛЗВАТЕДОCTАБЕHAТа ПОчИстваши чета (17).ОТСТРангte 6рьсанчтЕ кAKTO e NOKAЗАно HA ФИr.7.
4 Cnei Bcya ynoTe6a IeKo cMa3BaIte peKeIuTe HoxKOBe(6) CbC cMa3OHTo MaCNo (18).

CbXpaHraBaHe

Korato ypeda He ce n3noJ3Ba, n3KJIouTe ro n rO cbxpaHraBaiTe B XJaADHO, cyxo MRCTO.
3a da npedna3nte ka6ena ot noBpe, He ro n3BnBaTe, nbpnaTe HJIH He ro yBnBaTe OKONo ypeA. Ako e noBpeDeHO, 3ameHete ro He3a6abHO OT KBaJIInΦuNpuHaHO liue.

6 PeuziklnipaHe

Koamo peuume da ce ocboodume om ypea,mpraea nbpoe da omcmpanume bamepuume kaemo e onucano no-dony.

1 N3BaTe Te ypea ot uenceJa n ro n3KnUoye Te dokato 6atepnnte ca Hnblno pa3peDeHn.
2 N3BaTe 6aTePnnte n Iu I3XbPneTe B IOxOJaI KoHTeHep.

Batepnte, n3no3BaHn B TOBA yctpoiCTBO ca Ni-MH 6aTeepn, cJeIOBaTeJIHO Te MORAT Da 6bDaT peuKlnpaHn IJN N3XBpJEnH B CbOTBeTCTBne C MeCTHnte 3aKOnHn pa3npoeJb. HIKOFA HE n3XBpJIte 6aTeepnte B KOHTeHepn 3a DomaHn OTnaDbu.

3 NxBpIeYcTpoICTBOTo B NOxOJaI KOnTeHep.

BAJKHO: Kozamo uckame da ce oceobodume om ypeda, HIKOKA He zo u3x6bprnme 8 kowue 3a 6oknyk. 3aheceme zo do haB6luzkua do bawra dom YCACTbK 3A OTNAdbLUnu ueHmbp 3a KOlekuura Ha omnaabcu 3a npepabomka. Po mozu hauun ue nomoaheme Ha apuxama 3a okonhama cpeda.

HRVATSKA

hr

Stovani korisnice,

Cestitamo Vam na odabiru proizvoda tvrtke SOLAC. Naši proizvodi razvjeni su i proizvedeni kako bi zasigurno i dugotrajno ispunjavali očekivanja i nasih najzahtjevnijih korisnika. SOLAC kučanski aparati takoder pruzaju i spokojnost pri uporabi, jer su zadovoljili i njastrože norme kvalitet e sigurnosti.