Skincare Depil Action 6000 - Ladyshave CECOTEC - Free user manual and instructions

USER MANUAL Skincare Depil Action 6000 CECOTEC

Safety instructions 8

1. Parts and components 49

2. Before use 49

3. Operation 50

4. Cleaning and maintenance 51

5. Troubleshooting 52

6. Battery disposal 53

7. Recycling of electrical and electronic equipment 53

8. Copyright 54

9. Simplified EU Declaration of Conformity 54

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• This appliance can be used by children aged 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
• The appliance must be powered at a low safety voltage as stated on the marking.
• Ensure that the mains voltage matches the voltage stated on the product's rating label and that the socket is properly earthed.
• This appliance is intended for domestic use only and is not suitable for use in commercial establishments such as bars, restaurants, farms, hotels, motels, and offices.
• For hygienic reasons, do not share this appliance with other people.
• Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• WARNING: keep the appliance dry.

• When switched on, the appliance must never come in contact with the hair on your head or eyelashes to prevent any injury hazard as well as to prevent blockage or damage to the appliance.

• Do not exchange or manipulate any part of it. Otherwise, there is risk of electric shock.

• People with reduced immunological response or that suffer from diabetes mellitus, haemophilia or immunodeficiency must consult their doctor before using the device.
• Use the device only for hair removal and following the instructions in this manual.
• Do not remove hair from areas with open wounds, cuts, burns, warts, moles, sun burnt skin or varicose veins.
• Do not use the appliance if you are suffering from a skin irritation, skin infections like psoriasis or eczema.
• Do not use the appliance for removing hair from your face, head, chest, eyebrows, or eyelashes.
• The appliance has batteries that cannot be replaced.

Battery instructions

• This appliance includes a Li-ion battery. Do not incinerate or expose it to high temperatures, as it may explode.
• The battery may leak under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid comes into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.
• Before a new battery is used or the battery is used for the first time after long-term storage, fully charge the battery.
• When the device is stored and not used for long periods of time, ensure that the battery pack is fully charged.
• Battery ingestion can cause burns, soft tissue perforation and death. Severe burns may occur within two hours of ingestion. In case of battery ingestion, please seek medical help immediately.

INSTRUCTIONS DE SÉCURITÉ

1. Epilation head
2. Operating light
3. Charging indicator light
4. Protection cap for large areas
5. Anti-slip silicone grip
6. Power/speed setting button
7. Delicate cap for sensitive areas
8. Head release button
9. Cleaning brush
10. Charging cable

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact the Cecotec's Official Technical Support Service immediately.
• Do not remove the serial number of the appliance in order to keep a correct traceability of it in case of assistance.

Box content

• Electric epilator
• 2 protective caps
• Cleaning brush
• USB Type-C charging cable
• Instruction manual

3. OPERATION

The epilator features an operating light located on the front of the device.

This light illuminates the epilation area, helping to detect even the finest or most difficult-to-see hairs. It automatically turns on when the epilator is powered on. No additional configuration is required, as it remains active throughout the entire epilation process.

3.1. Charging the epilator

Fully charge the epilator's battery before first use. To do so:

1. Connect one end of the power cord to the epilator body and the other to a compatible power adapter.
2. Charge the epilator for approximately 90 minutes.
3. Whilst charging, the indicator light will illuminate red.
4. When fully charged, the indicator light will turn white.

3.2. Changing the protection cap and delicate cap

Use the most suitable protective cap for the area you intend to epilate.

To remove the protective cap, hold the epilation head with one hand and, with the other, pull upward on the protective cap's side tabs.

To attach it, place it over the epilation head and press the front and back of the protective cap until you hear a click.

3.3. Pre-epilation tips

For best results, we recommend exfoliating your skin before epilation. This step offers several benefits:

• Prevents ingrown hairs, helping them grow properly.
• Removes dead skin cells, improving skin texture.
• Prepares the skin to better absorb moisturising products.
• Contributes to maintaining healthy, well-cared-for skin.

Notes:

• Exfoliate the day before epilation.
• Avoid exfoliating immediately after epilation to prevent irritation.

3.4. Hair removal from arms and legs

• For maximum efficiency, it is recommended to use the epilator on short hair (0.5 cm).

• Before epilating, we recommend taking a warm shower. This helps dilate the pores and therefore makes hair extraction easier.

• First, press the power/speed setting button to operate the device. The epilator will start at low speed.

• If you wish to select high speed, press the button again.

• Hold the epilator at a 90° angle to your skin, stretch the skin with one hand and move the epilator with the other in the opposite direction to hair growth.

Note:

Do not use it in circular motions or move it back and forth.

1. Move the epilator slowly and press it gently against the skin. Do not apply excessive pressure; otherwise, the device will operate more slowly, and epilation will be less effective.
2. When you have finished using the epilator, turn it off by pressing the power button again from the highest speed setting.

Note:

All hair removal methods that pull hair from the root may cause irritation or ingrown hairs (causing, among other things, discomfort or skin redness). This is a normal reaction and will disappear quickly, although it may last longer when epilating for the first time or if you have sensitive skin.

3.5. Underarm hair removal

If you have long hair (more than 1 cm), we recommend trimming it with scissors before using the epilator.

Use the low-speed setting and move the device upwards and then downwards while keeping the skin taut.

3.6. Moisturising

After epilation, we recommend applying a moisturising cream to soften the skin. Apply it using circular motions to enhance absorption.

3.7. Lock

The epilator's travel lock is useful for transport, preventing accidental activation.

To activate the lock, press and hold the power/speed setting button for 3 seconds. If the epilator is on, it will turn off.

If you try to turn on the epilator when the travel lock is activated, the charging indicator light will flash white three times.

To deactivate the lock, press and hold the button again for 3 seconds. The epilator will start operating.

4. CLEANING AND MAINTENANCE

• Ensure the device is switched off and unplugged from the mains before cleaning.
• Do not use compressed air, scouring pads, abrasive cleaning powders or products to clean the device.

• Do not immerse the device in water or any other liquid.

• Use a soft, damp cloth with a small amount of water to clean the device's surface.

• Thoroughly dry the device after cleaning.
• It is recommended to periodically disinfect the epilation head with alcohol.
• Store the epilator in a dry place, protected from dust.
• Fully charge the battery before storing the device for an extended period.
• Do not attempt to dismantle the device's internal parts; for repairs or advanced maintenance, contact Cecotec's Official Technical Support Service.
• To clean the epilation head:
• Hold the device firmly.
• With one hand, press the head release button whilst pulling the head with the other hand.
• Remove it and clear any hair from the inside using the cleaning brush.
• Then rinse with cold water and ensure the epilation head is clean and dry before reattaching.
• Align the epilation head with the device base.
• Gently press the head towards the device body until it clicks into its original position.

Note: It is recommended to periodically disinfect the head by soaking the cleaning brush in alcohol.

1. TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	POSSIBLE SOLUTION
The epilator does not turn on.	1. The battery is discharged.2. The epilator is not connected correctly.3. Power button not pressed.	1. Charge the epilator for the recommended time.2. Make sure that the cable is properly connected.3. Press the power button to switch on the device.
The epilator makes an unusual noise.	1. Incorrectly installed head.2. Internal obstruction.	1. Remove and reinstall the head correctly.2. Switch off the epilator and clean it.
Battery does not charge.	1. Defective charging cable.2. Dirty charging port.	1. Try a different charging cable.2. Clean the charging port carefully.

The epilator overheats.

1. Prolonged continuous use.

1. Switch off the epilator and let it cool down.

WARNING:

Do not attempt to repair the device yourself. If the problem persists after performing the checks described above, please contact a qualified electrician, the store where you purchased the product or Cecotec's Official Technical Support Service.

6. BATTERY DISPOSAL

This epilator contains a lithium battery. Before disposing of the product at the end of its useful life, remove the battery and dispose of it in accordance with local regulations.

To do so (Fig. 2):

IMPORTANT: Ensure the battery is completely discharged before removal.

1. Use a prying tool to remove the power button.
2. Use diagonal cutting pliers to open the main housing from the power button slot, then continue cutting towards both sides. After completing all cuts, remove the housing.
3. Remove the epilation head, unscrew the 2 screws securing the upper cover of the main body, then remove the upper cover.
4. Remove the retaining plate and release button spring, along with the release button itself.
5. Unscrew the 2 screws at the bottom of the main body.
6. Remove the motor head using pliers.
7. Extract the internal components by pulling from the top of the epilator body.
8. Next, unscrew the three screws from the motor cover plate and remove the motor cover plate.
9. Separate the circuit board assembly, battery, motor and charging port from the support.
10. Finally, use a soldering iron to remove the connections between the battery and circuit board, and remove the battery.

7. RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated

by the local authorities.

For detailed information on how to properly dispose of electrical and electronic appliances

and/or batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help to protect the environment.

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

9. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this product complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Img. 1

product schoon te maken.

declaration-of-conformity

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/1

1

2

3

4

5

6

7

8

9

10

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/2

www.cecotec.es