Cecoraptor Perfect Fix - Screwdriver CECOTEC - Free user manual and instructions

Product type	Cordless glue gun with rechargeable battery
Brand	Cecotec
Model	Cecoraptor Perfect Fix (reference 70028)
Power supply	Built-in lithium-ion battery 3.7 V / 1.5 Ah
Charger	Input 100–240 V ~ 50/60 Hz, output 5.5 V / 0.6 A, class II
Melting temperature	170 °C
Preheat time	Approximately 60 seconds
Battery life	Approximately 30 minutes per charge
Charging time	Approximately 3 hours
Compatible glue sticks	Length 140 mm, diameter 7 mm
Box contents	1 glue gun, 1 charger with stand, 10 glue sticks, 1 manual
LED status indicator	Red (heating), green (ready to use)
Battery charge indicator	Red (battery empty), green (battery charged)
Automatic shut-off	After approximately 10 minutes without use
Intended use	Bonding wood, cardboard, paper, leather, ceramic, glass, metal, fabric, cork
Usage	Household use only
Cleaning and maintenance	Soft lint-free cloth, do not immerse in water
Safety	Nozzle thermal protection, automatic shut-off, status lights
Warranty	2 years (according to the instruction manual conditions)
After-sales service	Cecotec Support: [phone]

Frequently Asked Questions - Cecoraptor Perfect Fix CECOTEC

How do I charge the battery of the Cecotec Cecoraptor Perfect Fix glue gun?

Place the gun in its charger/stand, plug the charger into a protected outlet, the red indicator lights up. A full charge takes about 3 hours; when the indicator turns green, remove the device.

What do the LED lights on the gun mean?

The status LED changes from red (heating) to green (working temperature reached). The battery charge indicator is red when the battery is empty and green when it is charged.

How long does it take for the gun to be ready?

The preheat time is about 60 seconds. Wait for the status LED to turn green before you start gluing.

What type of glue sticks should I use?

Use hot melt glue sticks of 140 mm length and 7 mm diameter. The manual recommends original Cecotec accessories.

What materials can be glued?

The gun is suitable for bonding wood, cardboard, paper, leather, ceramic, glass, metal, cork, textile, plastic (check compatibility). Avoid heat-sensitive materials such as soft PVC and polystyrene.

What should I do if the glue does not come out or comes out poorly?

Check that the device is properly hot (green LED), that the stick is correctly inserted and is the right diameter, and press the trigger slowly. Clean the nozzle if necessary.

How to clean the glue gun?

Unplug the charger, let the device cool down, then wipe the exterior with a slightly damp soft lint-free cloth. Never immerse the device in water and do not use solvents.

Does the gun turn off automatically?

Yes, after about 10 minutes without use, the device shuts off automatically. To turn it back on, press the ON/OFF switch and check the status LED.

What should I do if hot glue comes into contact with skin?

Rinse the area immediately with cold water for several minutes. Do not try to peel the glue off the skin. Consult a doctor if necessary.

Can I use a different charger or battery?

No, only use the charger and battery supplied or recommended by Cecotec. Using other accessories may cause injury or fire.

USER MANUAL Cecoraptor Perfect Fix CECOTEC

1. Parts and components 262
2. Before use 262
3. Operation 263
4. Cleaning and Maintenance 267
5. Troubleshooting 269
6. Technical specifications 272
7. Disposal of old electrical appliances 273
8. Technical support and warranty 273

SOMMAIRE

Información

Warning due to electrical voltage

This symbol indicates that there is danger to human life and health due to electrical voltage.

Warning due to hot surface

This symbol indicates that there is danger to human life and health due to hot surfaces.

Warning due to explosive substances

This symbol indicates that there is danger to human life and health due to explosive substances.

Warning

This word warns about a

danger with a medium risk level that, if not avoided, can result in death or severe injuries.

Warning

This word warns about a danger with a low risk level that, if not avoided, can result in minor or moderate injuries.

Information

The instructions with this symbol help you perform your job quickly and safely.

Note

This word refers to important information (e.g. material damage) but not risks.

Take the manual into account

The instructions with this symbol indicate that you need to take the instruction manual into account.

Use protective gloves

The instructions with this symbol warn you to use protective gloves.

Use protective eyewear

The instructions with this symbol warn you to use protective eyewear.

- Warning Read this instruction manual before plugging or using the device and keep it always near the appliance.

- The non compliance with these

safety indications or the instructions included in this manual may result in electric shock, fire and/or severe injuries.

• Keep this instruction and safety manual for future use.

• The concept used in these safety indications makes reference to both mains-operated power tools (with power cord) and battery-operated power tools (without power cord).

• This device can be used by children over the age of 8, as well as persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they do so under supervision or have been instructed in the safe use of the device and the resulting dangers.

• Children must not play with the appliance. Cleaning and maintenance of the charger should not be performed by children without adult

supervision.

General safety information for power tools – Safety at the workplace

• Keep your workplace clean, tidy and properly lit. The untidiness or poor lighting in the workplace can cause accidents.
• You must keep children and other people away whenever you are using a power tool. Distractions can cause accidents due to loss of control of the

device.

- Do not manipulate or use power tools in potentially explosive atmospheres in the presence of flammable liquids, gases or dust.

Power tools can cause sparks that set dust or gases on fire.

General safety information for power tools – Electrical safety

• The power tool plug or power supply must always fit properly in the socket base. The plug cannot be modified or substituted by the user.
• You must not use adapter plugs with safety grounded power tools.
• The unmodified and unsubstituted plugs and socket bases decrease the risk of electric shock.
• Power tools must not come into

contact with rain and moisture. The contact with water increases the probability of electric shock.

• To use power tools outdoors, you must only use appropriate extensible cables for outdoor use, this way it will reduce the risk of a possible electric shock.
• If you cannot avoid the use of a power tool in a moist atmosphere, the electrical installation must have

a circuit breaker.

• You must not use the supply cord with other purposes, like transporting or hanging the tool, etc. To unplug the tool pull the plug, not the cord.
• You must keep the supply cord away from heat sources, oil, sharp edges or moving parts of the device. Damaged or defective cords increase the danger of electric shock.

ENGLISH

- You must avoid contact with any body part with grounded conductive parts, as well as with pipes, heaters, stoves and refrigerators.

The probability of electric shock will increase if any of your body parts is grounded.

- The circuit breaker reduces consequences if there is an electric shock.

General safety information for power tools – Human safety

- Use extreme caution and do not lose attention during the handling of the power tool. Do not use power tools if you are tired or under the influence of drugs, alcohol or medication.

Inattention can cause severe injuries.

- You must use appropriate personal protective equipment (PPE).

Use always protective eyewear.

Individual personal protective equipment include: safety mask, safety shoes, headgear, hearing protection and/or tight protective clothing. Their use may reduce the risk of injuries.

• You must use appropriate clothes. Do not use loose clothes.
• You must keep hair, clothes and gloves away from moving parts that can cause entrapment. Loose clothing or flowing hair can cause entrapment accidents.
• You must avoid uncomfortable positions during the use of the device. Position must be sure and

balanced to ensure the correct use of the device, especially with uncontrolled situations.

- You must avoid the accidental start-up of the device. Make sure the power tool is off before you plug it in the socket base and/or turn the battery on, as well as before moving or handling it. Be especially careful not to operate the switch inadvertently while the equipment is switched on, as this

may cause an accident.

General safety information for power tools – Use and handling of power tools

• You must not use power tools if the switch is defective. If you cannot turn it on or off do not use it, as it may cause an accident.
• You must use the appropriate tool for every determined job, this will

increase safety.

• Remove always the plug from the base and the battery before: adjusting, changing accessories, cleaning or handling the device, this way accidents due to accidental start-ups are avoided.
• You must keep and take proper care of power tools. This includes the following: checking the moving parts move easily and without blockages,

check there are no damaged pieces that may affect the correct operation of the power tool. If you detect any damaged or defective piece, it must be repaired or replaced by the Cecotec official Technical Support Service or qualified technicians. Lack of maintenance can cause accidents.

- You must use power tools and accessories following this

instruction manual. You must keep your workplace conditions and the job to perform present. Do not use the device with purposes different that the ones exposed in this manual, so that you will avoid dangerous situations.

- You must keep unused power tools out of the reach of children. Do not allow unqualified persons, with lack of experience or that have not read

the instructions to use the device, as they can cause accidents due to lack of knowledge.

General safety information for power tools - Authorized Support

Service

- The repairing of your power tool must only be carried out by the

Cecotec official Technical Support Service or qualified personnel and only with original spare parts. This way you will guarantee the power tool is safe.

Specific safety indications for glue guns

- You must place the device on flammable, stable and non-heat-

conducting surfaces.

• There is a risk of fire due to high operating temperatures.
• Do not ever touch the device nozzle nor the glue stick.
• Do not allow persons or animals get in contact with hot glue. If there was any contact with skin, you must wet the affected area with cold water for several minutes. Do not peel the glue off the skin.

ENGLISH

• The nozzle and the glue stick reach temperatures over 170° C.
• Do not use flammable solvents to clean the parts to be sticked. There is risk of fire.
• Do not stretch glue in the nozzle. The skin contact with hot glue can cause severe burns.
• When using the device in continuous mode, do not pull the trigger with excessive force. You can damage the

tool

• Only the Cecotec official Technical Support Service or specialized or authorised technicians can carry out maintenance jobs and repairs that involve opening the casing.

• If there is glue backflow, you must stop work immediately. Cleaning must be done by the Cecotec official Technical Support Service or by authorised or qualified personnel.

• Do not ever use the glue gun with room temperatures below 5°C or over 50°C.

• Do not use the glue gun in places with direct, strong or cold wind. The device efficiency may be affected.

Proper use

- The use of this device is exclusively for gluing wood, cardboard, packaging, leather, ceramics, glass,

carpets, gaskets, plastic, fabrics, cork and metal with hot-melt glue (be sure to check the technical data of the components to be glued beforehand). The components to be glued must be clean, without impurities and free of moisture and grease.

- We recommend to use this power tool with original accessories from Cecotec.

Misuse

- This device is not appropriate to glue heat-sensitive materials, like soft PVC, polystyrene and other spongy materials. It is neither appropriate to glue large surfaces.

User qualifications

- The glue gun users must have read and understood this instruction manual and specially the chapter

about Safety.

Personal protective equipment

Use protective gloves

This way you will protect your hands against possible burns, smashing or scratching.

Residual hazards

Warning due to electrical voltage

- Work on electrical

components may only be carried out by an authorized specialist company or by Cecotec Technical Service.

Warning due to electrical voltage

Electric shock due to inadequate insulation. You must check the device is not damaged and works properly before using it. If you detect damage or malfunction do not use it.

- Do not use the device if it is wet.

- Do not use the device if your hands are wet.

Warning due to electrical voltage

- Before carrying out any work, cleaning or maintenance in the device, you must disconnect the power plug from the socket.

- Remove the power cord from the power socket by pulling the socket, not the cord.

Warning due to electrical voltage

A short-circuit can occur if liquids access the casing.

• Do not immerse the appliance or accessories in water or other liquid.
• Be careful water or other liquids do not access the casing.

Warning due to hot surface

• Interchangeable tools or accessories can be hot after their use. Use extreme caution or you may suffer burns if you get into contact with them.
• Do not ever touch the interchangeable tool directly with your hand. Use protective gloves!

Warning due to explosive substances

• Do not expose the rechargeable battery to temperatures over 45° C. The battery cannot come into contact with water or fire.
• You must avoid direct sunlight as well as moisture. You may produce an explosion.

Warning

- Do not handle or try to glue objects containing

asbestos. Asbestos is considered a carcinogenic material.

Warning

• The device is not a toy and it cannot be handled by children. Choking hazard!
• Do not let the packaging material within the reach of children. It can be dangerous.

Warning

- Keep the device sufficiently far away from heat sources.

Warning

- This device can produce risk and severe incidents if it is handled incorrectly by unqualified or uninstructed users, or if used for

purposes other than those described in this manual. Take the users qualifications into account.

Note

• Improper transport or storage may damage the product.
• Check the sections related to transport and storage of the device.

Specific safety indications for rechargeable batteries and chargers

• You must only use the original rechargeable batteries provided by Cecotec. The use of other types of rechargeable batteries can cause fires or injuries.
• You must charge the batteries only with recommended or provided

chargers by Cecotec. A charger for a particular type of battery may cause a fire if used on a different battery.

• You must keep rechargeable batteries away from paperclips, coins, keys, nails, screws and any other small metal object that can link the battery contacts. A short-circuit between the rechargeable contacts can cause fires or injuries.
• Do not charge batteries from other

products different to Cecotec. The charger is designed to charge the rechargeable batteries provided by Cecotec with their technical specifications. An improper use can cause a fire or explosion.

- An improper use of the rechargeable battery can cause a liquid spill. If this takes place, avoid contact with it. In case of accidental contact, rinse the affected part with water.

• If the liquid comes into contact with your eyes, seek medical assistance immediately.
• Spilled liquid can cause skin irritation or burns.
• If the battery is damaged or misused it can release toxic fumes. Air the room by letting fresh air enter and seek medical assistance in case of discomfort.
• Fumes can produce irritation to the

breathing system.

• Be careful electrical connections do not come into touch with moisture. Do not immerse in water or other liquids when cleaning it or when it is working as it may produce a short-circuit. Do not immerse in water or any other liquid.
• Carry out the instructions for cleaning and maintenance.
• Do not open the rechargeable

battery. You can produce a short-circuit.

• Do not short contact the rechargeable battery. You may produce an explosion.
• Do not hit the battery. It cannot be hit.
• The charger is only suitable for indoor use. Do not use it outdoors.
• Keep the charger clean. Dust can cause electric shock.
• You must not leave the charger

operating on easily flammable surfaces (paper, textile products, etc) nor flammable atmospheres.

• The charger can reach high temperatures while charging, there is a risk of fire.
• You must use the charger only to charge the battery. It cannot be used as power for the power tool.

Device description

• The device is a glue gun with rechargeable battery for repairing and DIY jobs.
• It is suitable for gluing e.g. wood, plastic, fabrics, cardboard, paper, ceramics, leather, cork, glass and metal.
• It is recommended to carry out jobs in approximately 30 minutes. When pausing during use, the glue gun can

be placed in the charger.

• The battery level is shown with an indicator.
• The status LED notifies by changing colour when it has reached the work temperature. Preheating time is approximately 60 seconds. Time may vary.

- The device has an auto shut-down after 10 minutes of inactivity.

- The product is exclusive for household

use, it cannot be used for industrial or commercial purposes.

INSTRUCTIONS DE SÉCURITÉ

Symboles

Information

Information

Informazione

Informação

Informatie

Informacja

Informace

Información

Información

Información

1. Status LED
2. On/off switch
3. Battery level indicator
4. Connection contacts
5. Operating trigger
6. Power adapter (plug)
7. Charger/device holder
8. Glue stick (x10)
9. Stick input
10. Nozzle
11. Thermal protection cover

Supply volume:

1 x Glue gun
1 x Charger with holder
10 x Glue sticks, length: 140 mm, diameter: 7 mm
1 x instruction manual

2. BEFORE USE

• Take the product out of the box.
• Remove all packaging material. Save the original box.
• Make sure all parts and components are included and in good conditions. If any visible signs of damage are observed, contact the Cecotec official Technical Support Service immediately.
• Do not leave the packaging unattended. It could be dangerous for children. Dispose the packaging according to national legislation.

Warning due to electrical voltage

Electric shock due to inadequate or insufficient insulation. Check, before using it, that the device and its accessories are not damaged and work properly. If you detect any damage do not turn it on. Do not use the device if this or your hands are wet!

3. OPERATION

Charge the battery.

Warning

During the charging process the handle may heat up, it is normal.

Note

If the battery charges improperly, it could get damaged. Do not ever

charge the battery in a room temperature below 10° C or over 40° C.

• The battery is supplied half-charged to prevent damage due to total discharge.
• The battery can be charged before using the device for the first time and whenever the battery level is low. The red light in the battery indicator informs of a low battery level.

Battery charging:

1. Place the device in the charger (7). Fig.2
2. Connect the plug (7) in a well protected power socket (socket base). Fig.3
   The charging indicator (3) will light up in red.

A full charge takes approximately 3 hours. This value can change due to different factors.

1. When the battery charging indicator turns green, the charge will be complete. Fig.4

ENGLISH

1. Unplug the charging plug (7) from the power socket (socket base).
2. Unplug the glue gun from the charger.
3. The device and the charger can heat up during charge.

Testing the battery charging status

The battery status is shown in the battery indicator.

• Green LED light: fully charged.
• Red LED light: empty battery. Charge the battery.

Placing the glue stick

You must introduce the glue stick into the stick input (9).

Using the glue gun

• First, you must degrease the metal surface before gluing. Remove any remains like oil, synthetic lubricant, etc.
• Moist can cause glued surfaces to separate.

• If glue comes into contact with skin, apply cold water for some minutes on the affected area.

• If you need to glue a highly heat-sensitive material, try it first with a test piece.

• In textile products it is not possible to remove the glue completely. It is also not possible to remove it by washing at high temperature.
• If necessary, use special glues for different materials to the ones specified in this manual.
• Do not try to glue highly flammable or combustible materials.
• Do not work on a highly flammable or combustible base.

Gluing

• To glue flexible materials, like textile products, apply glue in a zig zag pattern.
• Quickly cooling materials should be pre-treated with a hot air gun, so that the glue will adhere better.

• Tighten and press the pieces after gluing them with your hands. It is not necessary to use a clamping device.

• You can glue in dots or in a lineal pattern.

• To remove glue remains once it has cooled doen, you can use a sharp blade. Use extreme caution to avoid possible cuts.
• It is recommended to sand flat surfaces before gluing them.
• If you want to unglue glued areas, just heat them up.
• The glue remains can be removed once they have cooled down.
• Glued areas can be painted.

Plugging and unplugging the device

It is highly recommended to use personal protective equipment during the use of the glue gun. Hold down the on/off switch (2) until the status LED (1) turns red. Fig.5

• Glue will start to heat up.
• When the glue gun has reached the optimum work temperature, the status LED will turn green.

• Now the device is ready for use.

• To turn it off, you must hold down the on/off switch (2) until

the status LED (1) is off. Fig.6

Auto off

• The auto off starts after approximately 10 minutes of inactivity.
• It is recommended not to turn on the device until it is used.
• Turn the device on again by holding down the on/off switch (2) and check the status LED as well as the charging indicator, in case you will need to charge or heat up the device again.

Gluing

Note

Warning due to hot surface

The nozzle can be hot after its use. The glue that comes out of the nozzle can also be hot. You may get burnt.

• Do not ever touch the nozzle directly with your hand!
• Use protective gloves!

ENGLISH

Information

The surfaces to be glued must be completely clean, dry and free from grease, oil, moist, etc.

Information

- When placing a new glue stick the device will require more time to heat up than when you use it for the first time. This is because the stick input can be blocked with hardened glue remains.

The status LED will turn green.

1. The device should be allowed to warm up. Introduce in the stick input (9) the proper glue stick for the material used on

the back. Press the trigger (5) to adjust the adequate glue flow. Fig.7

1. You can apply glue in dots or in a lineal pattern.
2. You must immediately press the two pieces to be glued for approximately 30 seconds. You can use your fingers with extreme caution so you do not get burnt. It is advisable to use protective gloves.
3. After approximately 5 minutes, the glued area will be resistant.
4. You can place the device in the charger when you pause.

Unplugging the appliance.

Warning due to electrical voltage

Do not ever touch the plug with your hands wet.

1. Unplug the appliance.

2. Remove the power cord from the power socket (socket base) by grabbing the plug, not the cord.

3. You must leave the device to cool down (if necessary).
4. Clean the device. Read the "Cleaning and Maintenance" section.
5. You must store the device following the "Storage" section.

4. CLEANING AND MAINTENANCE

Maintenance:

• You must store lithium ion batteries completely discharged. You may cause a total discharge and, as a result, it may break.
• While the device is not being used, you must store it following these instructions:
• The room temperature must be lower than 40° C.
• It must be dry, moisture-free and protected from cold and heat.
• You must store it in a place protected from dust and direct sunlight.

Pre-maintenance works

Warning due to electrical voltage

Only the Cecotec official Technical Support Service or specialized or authorised companies can carry out maintenance jobs and repairs that involve opening the casing.

Warning due to electrical voltage

1. Unplug the appliance.
2. Remove the power cord from the power socket (socket base) by grabbing the plug.
3. Allow the device to completely cool down.

Maintenance indications

Inside the device there are not any pieces the user must maintain or lubricate.

ENGLISH

Cleaning

It is necessary to clean the device before and after using it.

Note

It is not necessary to lubricate it after the clean-up.

Warning due to electrical voltage

Liquids entering the casing can cause short-circuits! Do not immerse the device into water or any other liquid. Make sure any type of liquid does not enter the casing.

• To clean the external parts of the device, use a clean, soft, lint-free cloth, it may be slightly moistened. Make sure moist does not enter the casing or come into contact with any electric component.
• Do not use detergents, aggressive cleaning agents or solvents, like cleaning sprays, paint thinners, detergents containing

alcohol or abrasive cleaners to moisten the cloth.

• To dry the device, use a clean, soft, lint-free cloth. And completely dry.
• Clean the device connection contacts carefully, as well as the charger contacts.

Transport and storage

Note

- You must transport and store the device properly, following the instructions in this manual, so you do not harm it.

Transport

• Follow at all times the following transport instructions:
• First, unplug the device.
• Remove the power cord from the power socket (socket base) by grabbing the plug, not the cord.

• Switch off the device and allow it to cool down completely.

• To transport lithium ion batteries you must take into account the provisions of the transport of dangerous goods.

• You must take into account the following instructions to transport lithium ion batteries.
• The user can transport batteries by road without further requirements.
• To ship them through third parties (e.g. air transport or forwarding) you must take into account the requirements you must meet regarding packaging and signaling. The packaging must be made by an expert in dangerous goods.
• Before shipping the rechargeable battery, make sure the casing is in perfect conditions.
• You must also take into account additional national dispositions regarding shipping.

Storage

• First, unplug the device.
• Remove the power cord from the power socket (socket base) by grabbing the plug, not the cord.
• Switch off the device and allow it to cool down completely.
• Clean the device as explained in the "Cleaning" section.

5. TROUBLESHOOTING

• Only the Cecotec official Technical Support Service or specialized or authorised by Cecotec companies can carry out maintenance jobs and repairs that involve opening the casing.
• Cecotec has checked the correct operation of the device. Yet, if there is an issue, check as it follows:

The first time you start the machine there is smoke and a slight smell:

ENGLISH

It is not a fault. Shortly after we start the machine, both the smoke and the smell will disappear.

The battery does not charge:

• You must check both the charger connection with the device and the mains.
• You must check there is electric power in the socket base.
• You must check both the cord and the power plug are not damaged.
• You must check the power supply (fuses, thermal-magnetic circuit breakers, RCDs, etc).
• You must check the charger is not damaged. If you notice any damage, stop using it. Contact the official Technical Support Service of Cecotec.
• You must check there is no dirt in the charger connections. Clean the dirt.

- The battery may be defective or suffer any damage. Contact the official Technical Support Service of Cecotec.

The device does not work:

• The battery level may be too low. Charge the battery.
• The charging connectors and the charging socket may be dirty. Clean them by removing the dirt remains.
• The charger is not correctly connected. Check the connections.

Information

Wait for at least 10 minutes before you restart the device.

The glue stick falls from the device:

You must check the glue stick diameter is appropriate.

The glue stick does not move:

• Check the stick has enough glue. Place a new glue stick. Use only appropriate glue sticks, following the technical details.
• You must check the glue stick diameter is appropriate.

The glue does not dose evenly:

Make sure the device has reached its optimum melting temperature before using it. Allow the device to completely heat up. Press the trigger slowly and evenly.

There is liquid leaking from the stick input:

It may occur that the glue stick diameter is too small or the melting temperature is too low.

The glue detaches after cooling down:

• There are dust, dirt or grease remains on the surface. Clean and/or carefully sand the surfaces to be glued.
• The material to be glued is not suitable for hot melt glue. Use special glue sticks.

Only one side is glued:

Check the glue has not cooled down before pressing the pieces. Press the pieces to be glued immediately. You can heat the materials that cool down quickly with a hot air gun. You can apply glue in dots.

There are glue remains in the shape of "threads".

You must not hold the trigger down after gluing. You must release the trigger in due time. Scrape the nozzle when you lift the piece.

The glued soles detach:

Moisture makes leather swell. Use special glue sticks.

Glue comes into contact with your fingers:

• Glue may go through materials, like paper or certain fabrics. You must use protective gloves to avoid possible burns when operating the glue gun. It is also advisable to use a heat-resistant base, e.g. made of silicone.
• If the piece to be glued is made of steel it may heat up. It is advisable to use protective gloves to avoid possible injuries.

ENGLISH

The piece to be glued melts down:

The piece to be glued may be made of a heat-sensitive material, e.g. polystyrene. These materials are not suitable for hot melt glue. Use special glue sticks.

Note

After every maintenance and repairing work, wait for at least 3 minutes to restart the device.

If the device is not working properly, contact the Cecotec official Customer Service.

6. TECHNICAL SPECIFICATIONS

Product: 70028

Reference: CecoRaptor Perfect Fix

Nominal voltage: 3.7 V DC

Working room temperature: from 5°C to 50°C.

Charging room temperature: from 10° C to 40° C.

Melting temperature: 170°C.

Glue sticks, length: 140 mm, diameter: 7 mm

Heating time: approx. 60 s*

Fully charged autonomy: approx. 30 min*

Rechargeable battery (built-in)

Type: lithium ion

Nominal voltage: 3.7 V DC

Capacity: 1.5 Ah

Charger

Input nominal voltage: 100 - 240 V 50/60 Hz

Rated input current: 0.2 A

Nameplate output voltage: 5.5 V DC

Charging current: 0.6 A

Type of protection: II

Cord length: 150 cm approx.

*This information is approximate and may vary depending on multiple factors.

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU and 2006/66/CE on Waste Electrical and Electronic Equipment (WEEE) specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol on the product reminds you

of your obligation to dispose of the appliance correctly.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

The glue gun, accessories, packaging, glue sticks and glue remains must be recycled in an environmentally friendly manner.

8. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

- The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture,

ENGLISH

immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.

• The product has been disassembled, modified, or repaired by persons, not authorised by the Cecotec official Technical Support Service.
• Faults deriving from the normal wear and tear of its parts, due to use.

The warranty service covers every manufacturing defect of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at [phone].

COPYRIGHT

The intellectual property rights over the texts, designs, photographs and illustrations in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

Information

Information

Information

Information

Information

Information

Informazioni

Informazioni

Informazioni

Informação

Informação

Informação

Informatie

Informatie

5. PROBLEEMOPLOSSING

Informatie

Informacja

Informacja

Informacja

Informace

Informace

Informace

Reference: CecoRaptor Perfect Fix

Fig./Img./Abb./Rys./Obr. 2

Fig./Img./Abb./Rys./Obr. 5

Fig./Img./Abb./Rys./Obr. 6

Fig./Img./Abb./Rys./Obr. 7

www.cecotec.es